n70 show in 4 problem
 

dear boss i have a n70 show 4 problem 1st- set hang, 2nd- sim card rejected, 3rd- sim not valid, 4th- contect retailar, i m try flash but same problem pls any 1 help me

For set Hang mostly it is due to Software problem, so flash it iwth higher version OR reflow little heat on main board.
Sim card rejected is sim problem since pin and puk entered wrong, so buy new sim or get blank sim and get your old number transferred.
Sim not valid is due to sim lock. Unlock the phone.
Contact retailer is mainly either due to Service provider missing or sp data missing. Post complete log from info. May be you need Ask-Rpl service for this.

Hi dear PASSIONATE_BOYS thanks for your kind reply,
but my problem isn't solved.i mean sometime it shown hang,sometime it shown sim rejected or sim not valid & contact retailer.I also servising mainboard & flash with higher version and old version but it continue show the problems.PLease do somethig for me.Again Thanx.

reboll rap3g cpu and reboll flash and flash it with higher version

First Do Sx4 Then Immediately Write Full Pm And Post The Result

Setting FLASH MODE
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.23.00 -> Revision: 0000
Patching APE boot step2...
APE Boot Ready
Error in cmd read id...
Error in ape get id...
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: 3DB472C2AED67F1D676B07081E2F81C34768ECD4
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101012200
Asic Mode ID: 00
Asic EM ID: 00000352
Asic Public ID: 0F200213A8FB4F51D69A10C65E959EC0CA350238
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.23.00 -> Revision: 0000
Patching APE boot step2...
APE Boot Ready
Error in cmd read id...
Error in ape get id...

You should pay attention to combo memory D5000, VDDRam ape ( from N4201)

u must have to reboll ape ic it should be ok

It is old thread but I want to nkow about...
Where is this APE IC? Could you make a picture, locating the APE IC on the PCB?
10x.