New Multi Protocol Phoenix Service Software Version 2007.4.6.170
 

Multi Protocol Phoenix Service Software Version 2007.4.6.170

Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)
Phoenix Service Software version 2007.4.6.170 has been released.
If you have Phoenix version 2004.24.7.55 or older you must uninstall it
before installing this release.


This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2007.4.6.170
- DK2 Dongle Driver v 6.21.0.169
- Connectivity Cable Driver 6.82.5.0
- FLS-4S Dongle Driver v 2.09.06
- Flash Update files for FLS-4S, FPS-8* and FPS-10 v 07.04.013
- Software package for FPS-11 v 1.00.012.1


Recommended PC HW requirements:
- Computer Processor: Pentium 700 MHz or higher
- RAM 256 MB
- Needed disk space 100-200 MB
Supported Operating Systems:
- Windows 2000 Service Pack 3 or higher
- Windows XP Service Pack 1 or higher
During installation a DESKey software protection dongle must be attached.
There are two types of dongle – the parallel port connection and USB
connection. When installing Phoenix into Win2000 or XP you must have
admin rights locally.
For using the Phoenix in Win2000 or XP, user must have power user rights.
After installing Phoenix Service Software version 2007.4.6.170, please
install latest product specific data package or SW bundles; do not use
old data packages or SW bundles.
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.


Changes/improvements made to from v 2006.44.6.163 to v 2007.4.6.170:
For CDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Energy management calibration fix for various products.
- Added FLS-5 support for the following models: 3155i, 6235, 6265i, 6256i,
6165, 2855i, 2865i, 2355, 2255.
- Preferred connection to FPS-10 is using the LAN port.
- The preferred connection to FLS-4S is using the USB port.
Known limitations/errors:
- FLS-5 is not yet supported for all CDMA phones.
- FPS-11 has limited success with this Phoenix version.
- FPS-11 should be used to revive “dead” Phones.
- Phoenix does not restore the Theme/Background for 3155i, 3155, 3152,
6155, 6155i, and 6152 after Easy Flash

Changes/improvements made to from v2006.44.6.163 to v 2007.4.6.170:
For GSM / WCDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Upgraded FLS drivers to improve FLS-5 flashing success rate.
- Fixed the installation bugs.
- Fault-Log UI has been removed.
- Auto creation of phone data XML-file is an alternative of the fault-log
module, and the path for saving the XML files can be modified with the
new UI under Tools>Options>Phone Info XML files setting menu.
- The “Firmware Update” panel has been improved to show the MCU flash
version to be flashed in the phone.
- Added support for RM-206, RM-230, 2G -RM-302, RM-298, RM-299, RM-
260, RM-270, RM-289, HF-21, RA-6, RH-99, RH-100, RM-277, RM-258,
RM-259, RH-305, RH-306, RM-92, RM-293 and RM-122.
- Energy management calibration fix for various products.
- Error with some functions in Phoenix is grey-out after certificate restoration
for BB-5 phones is fixed.
- Rebuilding IMEI/ESN, SIM lock requires Smart card, SX-4 with rebuild
access rights enabled. Please send your SX-4's serial number to your
regional security officer if you need these rights.
- Rebuilding ESN/IMEI with FPS-8 now requires and SX-4 card to be used.
An external smart card reader is needed when using the FPS-8.
- Auto Tuning requires a user registered and activated SX-4 card.
Known limitations/errors:
- Some BB-5 phones may not be able to flash when using FLS-5 and FBUS
connection, if that’s the case use a USB connection.


Download Link:
Phoenix 2007.4.6.170

Phoenix
 

Another link the download??

Thanks

Unlockcell

@Shayesta197


Thank You I Will Post Links To All Files Needed And Instructions

un tie with this hope yo all like

I can not open http://www.megaupload.com.

Would anyone upload this software to http://rapidshare.de/ and post URL?

Thanks a lot!!!

At first I had trouble with megaupload but now seems ok. Must have been problem with internet because a few sites were the same but they ok now also;)

hi , friend download link .

http://www.box-fx.com/files_free/pho...07_4_6_170.rar

mirror

http://bandung-flasher.net/gsm/phoen...07_4_6_170.rar

Does the Phoenix v2006.44.6.163 cracks works with the latest one or is there any new Crack for Phoenix 2007.4.6.170. If yes kindly post it

password???Thanks a lot!!!

Dongle Crack

Phoenix 2006 crack

Nemesis Service Suite

Nokia Diego 3.09

Phoenix Service Software 2007.4.6.170


INSTALL DIEGO
1. Run and install the following file: Diego 3.09.msi
If you get an error during the installation, it’s because you didn’t uninstall the Nokia connectivity cable driver!


2. INSTALL PHOENIX SERVICE 2007 WITH THE CRACK

3. Open The Dongle Crack First. Just Open It, Don’t Run It Now

4. Start installing phoenix 2007. During The Installation You’ll Get An Error Message.

5. Press on “Retry” and run the crack immediately after! (Check that the destination folder is Windows/system32). If you’re not fast enough, the message will reappear and you’ll have to re-run the crack the same way as above (but faster…)

6. You’ll get 2 error messages, "DESKEY" Just Press OK, And Then Finish.

7. Run Phoenix 2006 crack

8. Restart your PC.

Restart your PC.


now you can run Pheonix 2007 you might need to install Phoenix 2006 crack again i did'nt.

We need the Password ..........

Haribo

Where is the pasword????

password in your pm .

tnx for sharing bro

br