T10 00114 help?
 

I have the problem with T10 00114..cant remove the insert correct card message. I have external +5 on pin 1, shunt pin 5-6 NOT connected to external..
I'm using saras 2.2 only soft which can connect for me.

Can you explain me the whole procedure. Thank you very much..

I can't connect with er2000 ... it says power on the phone (i power) , says tx detected , progres bar, thet it just freeze... http://www.thoic.net/gsm/ubb/frown.gif
atx flasher and other ericsson flasher says when I try to flash wrong response from phone .....

read old post !!!!
everything what you need is on this messageboard.


Slawek

Yes I read them, and reread them, and again reread them, but couldn't do anything....

I'm missing some point ...
Can't make it work...

Hi
May be I can help you. (I unlocked several of them via Ericsson ATxx 2.2 by Saras or Datex) So you need this soft opcouse.
1. Full charge battery, use external 9-12v power on 7805.
2. You need txwest.rxx
3. Convert this rxx to bin via Ericsson flash converter
4. Run Atxx and enter the passwords (donno it is required or not but better to enter them http://www.thoic.net/gsm/ubb/smile.gif
5. First connect and UNLOCK it.
6. Remove battery,and insert it again when it say so.
7. Do flash step 1
8. Do flash step 2 (but uncheck USE INI SETTING checkbox before do this step )
9. Select txwest.bin when it asks to open the flash file.
10.And thats all
Note: It seems need to rerun the proggy every flash. As it wouldnt flash on next continouis flashing.
You can download all those soft and files from Darek gsm site http://www.zse.edu.pl/~darekgsm/

Good luck.


[This message has been edited by GreEn (edited 07 June 2000).]

It's seems that it's the problem with IMEI..
I can flash succefully (saras beeps and powers on) but the message "Insert correct card stays"....

IMEI read by Saras and IMEI *#06# AREN'T the same....

phone says some crazy IMEI when *#06#

Here again.

Here where I am living IMEI is not important.
So I dont care ont that. But I have one trick
(donno work or not better try it)
When using Cages flash converter it will ask to add or remove imei from the list. Add your own remove others. Also on Atx you can change imei after flashing. Set your own also. And see what will happen.
Please let me know what happend.

I have the same problem of IMEI different from *#06# and saras reporting
phone also not unlocked.


------------------

I think it's the problem with the version. Ericsson T10 00w04 unlocks with no problem but T10 00w07 shows "insert correct card", which I can't remove.

Any one unlocked 00w07 T10 with saras 2.2 ??

Ihave a problem i can not flash whide step one in datex 2.2 it's say t1x detect after 3sek it's say *no respons from the phone 4* can any one tell me what's the problem flashing whide step2 is no problem but step1 is problem if there is some one ho can help me please please...

Best regard GsmHq

mail:[email protected]

Hello Tombach:

Try this...

I also have some problems with 00W07 and
00W08... but here is MY way to solve it.
Give it a try...

Use saras 2.2 cracked version of course and
go to expert mode. Uncheck "Use INI"... and
check 'Ask IMEI'.
now press 'All' button. Follow the on screen
instructions and when the program does not
detect your phone after some steps of
power on, remove the battery quickly (even
if the program does not tell you to) and
put it back and press 'No' for a very short
moment. Program will again detect your phone.
Dont forget to put your original IMEI when
asked ok.

Now when all is done, phone will turn on
and will say 'Insert Correct Card'. Close
Saras proggie and run Ericsson Tools 2kay
(ER2000). Remove battery of phone and put
back again. Flash the phone again with
ER2000. Again, if the program does not
detect your phone, remove the battery, put
back quickly and press 'No' again. When
flashing is done, hopefully your phone will
be ok, but IMEI is changed http://www.thoic.net/gsm/ubb/frown.gif

TIPS:
Use full charge battery
Remove SIM card
Press 'No' very very very quickly, if you
press too long your phone may be damaged!

Here is very strange thing that I noticed, I
used same flash file for Saras and ER2000,
I just changed the format from rxx to bin.
But in Saras, phone is not ok. But when same
flash file is used with ER2000, sometimes
it will work!!! Hmmmm my guess is maybe
some CRC checking problem and Checksum
miscalculations...

Good luck man!

Best Regards,
X-Shadow