pls can someone help a stupid fool who killed his t28 - GSM-Forum

sam0345 · 10-23-2001, 16:50

when i tried to unlock it using atr5.2, it messed up and now doesnt turn on. when i try to redo it with any software it says timeout failure because the fone wont turn on. now, i did a search on this site and found sumthing about a darklemming revive but i cant find this anywhere. if anyone can send me the prog to my mail at [email protected] with any further instructions or add some help below i would be VERY grateful

***acyl2000*** · 10-24-2001, 03:25

Are you sure is SW problem, i think not if SW problem your phone always can detech by Atr.xx <img src="wink.gif" border="0"> <br />I guss is Hw problem. <img src="smile.gif" border="0"> <br />Sorry if i'm wrong. <img src="rolleyes.gif" border="0">

timitiz · 10-24-2001, 07:48

Hi there...

If atr gives no response to the powerup touch of the phone it's most likely that the battery is empty , the cable is mailfunctioning, or there is a hardware problem...

If you erease all flash , and you disconnect the phone before writing new flashfile in the phone than atr will still recognice the phone if you reconnect it to the cable...

try first a full battery...

Greetingz Timitiz...

Cad · 10-24-2001, 07:53

i had this problem with a t10. i used ericsson 121 to reset the phone and then atr worked fine to fix the problem <img src="smile.gif" border="0">

now i use 121 as soon as i get no response from other progs, fixes 100% for me

10-23-2001, 16:50	#1 (permalink)
sam0345 Junior Member Join Date: Oct 2001 Posts: 1 Member: 6944 Status: Offline Thanks Meter: 0	pls can someone help a stupid fool who killed his t28 when i tried to unlock it using atr5.2, it messed up and now doesnt turn on. when i try to redo it with any software it says timeout failure because the fone wont turn on. now, i did a search on this site and found sumthing about a darklemming revive but i cant find this anywhere. if anyone can send me the prog to my mail at [email protected] with any further instructions or add some help below i would be VERY grateful

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
pls can someone help	Moseunicetech	Chinese Models & Cloned Phones	0	01-06-2010 16:40
pls can someone post this file ry32dll.dll	huricane	UST Pro II	1	10-27-2006 20:57
pls can someone help me to unlocjk just one f...g trium 110 ???	alianu	Phone Unlocking Codes & Maps	0	07-15-2003 21:23
Pls can someone remind me that Forum ???	dannyogolo	GSM Mobile Links	2	07-05-2003 16:54
Pls can someone check validity of this...	outerc0re	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	12-31-2001 20:43

10-24-2001, 03:25	#2 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	Are you sure is SW problem, i think not if SW problem your phone always can detech by Atr.xx <img src="wink.gif" border="0"> <br />I guss is Hw problem. <img src="smile.gif" border="0"> <br />Sorry if i'm wrong. <img src="rolleyes.gif" border="0">

10-24-2001, 07:48	#3 (permalink)
timitiz Freak Poster Join Date: Jul 2000 Location: Zaandam, the netherlands Posts: 263 Member: 1715 Status: Offline Thanks Meter: 0	Hi there... If atr gives no response to the powerup touch of the phone it's most likely that the battery is empty , the cable is mailfunctioning, or there is a hardware problem... If you erease all flash , and you disconnect the phone before writing new flashfile in the phone than atr will still recognice the phone if you reconnect it to the cable... try first a full battery... Greetingz Timitiz...

10-24-2001, 07:53	#4 (permalink)
Cad Freak Poster Join Date: Oct 2001 Location: England Age: 45 Posts: 208 Member: 6818 Status: Offline Thanks Meter: 0	i had this problem with a t10. i used ericsson 121 to reset the phone and then atr worked fine to fix the problem <img src="smile.gif" border="0"> now i use 121 as soon as i get no response from other progs, fixes 100% for me