T10s dead please help!!!

[Trailer]

Hi mates,

After flashing my Ericsson T10s, it died.
I can't switch it on anymore.
I restored full Eeprom backup and flash backup.
I can read and write software to it, but can't switch it on!

Please help me!

Greetz Trailer.

[[MoOkIe]]

Hi!

Plz, be a little more specific... describe us the process you used to flash your phone, wich program, and so on...

Best Wishes.

[Trailer]

Hi [MoOkIe],

Thanks for your reply,

Well here it comes,
Phone: Ericsson T10s
History: upgraded from T10s ->> T18s (few year ago, not by me)

Software info phone: CX125112
prg
000414 1727

IMEI: 520019-19-524039-0 (original T10s IMEI is different)
Software used to change IMEI to "original" IMEI: ATR Service v5.3
After IMEI change: " You need to flash the phone now"
Tried to flash it with "000414.sbn" file (for T18s !!), got "error 03"
"Phone dead " Shortly removed battery: could not switch on, nothing!

Wrote "full Eeprom backup" made before with Ericsson Maker v1.6 by Bartek , still dead.

Finally I flashed it with "backup Flash from phone" with All Ericsson total Tool by Jethro (final edition).

I can read/write to phone, but it won't switch on.

Hope this is the info you need!

And I also hope you can help me, to bring the phone back to life!

Greetz Trailer.

[[MoOkIe]]

In ATR, does it flash completly?

If yes, then write an eeprom to phone using atr (you must use eeprom from another phone, read with ATR) ... i think i have some t10 eeproms for using with atr arround...

Best wishes.

[Trailer]

Hi [MoOkIe],

I'm not so familiar, with Ericsson phones.
The Eeprom and the Flash, I guess they have to match?
From same phone, or same software version?

I want to try to write T10s Eeprom and Flash with "Ericsson total Tool by Jethro", but do I need a T10"s" version to get it working?

If someone has a matching T10s Eeprom and Flash I would be very pleased!

If so. please let me know!

Greetz Trailer.

[[MoOkIe]]

Hi.

Try to upload a working eeprom from anyother t10, and use the repair function in atr....

note: you will need a flash file for atr (SBN).

I think it can help you....

Best regards.

[hanoon]

use USPU ....

and if u need EEPROM or any flash file/...

contact me on icq...

pls post here..

good luck

[Trailer]

@ [MoOkIe]

Thanks for your advise.

Greetz Trailer.

[GSMsurgeon]

Hi
try to flash with another cable? chek cable


B.R

[Trailer]

Hello hanoon

I don't have USPU, may be you can help me to get it.

I need a EEPROM and flash file of a "working" Siemens T10s

I would be very thankfull if you could help me, to bring this phone

back to life.

I don't have icq, but I have MSN installed.

You can mail me here

Greetz Trailer.

[hanoon]

download full working cracked version from this link.....



http://alcatel.prolidi.cz/software.html


best regards...

good luck!

[[MoOkIe]]

If you need an eeprom for ATR, just drop me a line right here...

Good luck.

[Trailer]

@ GSMsurgeon

Thanks for your reply.
Cable is O.K, can read and write, no problem.

What I need (I think) is a working backup of Eeprom + Flash
of a working T10s.

Greetz Trailer.

[Trailer]

Hi [MoOkIe]

You could do me a big favour, if you send me a good backup
of Eeprom + Flash of a "Ericsson T10s"

I don't know if the older T10 files work with the "s" version.

You can send them here

Greetz Trailer.

[Trailer]

Hi hanoon,

Thanks for the link, works allright.
Installed the program, no problem.

Tried uploading some T10 flashes and Eeproms.
Phone stays dead.

Badly need, a working "step by step" repair plan!
Like: "how to repair a dead Siemens T10s"
" What software to use."
" What repair files needed. "

All good suggestions are welcome.

If you have a working Eeprom + Flash of T10s + the software
needed, please send it here

All many thanks.

Greetz Trailer