<<k800 dead while unlocking>>

[sherali]

@UB TEAM

hi there,i have unlocked almost 35 phones successfully with ub server.but to day i have unlocked one k800 but i fails and and used my 50 logs here is the log

MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Connecting to server: US
Asking service availability...
Please turn on the phone, and connect it to the DCU-60 cable
Port found at: Sony Ericsson Device 039 USB WMC Device Management
CSCA activation is available on this firmware
Waiting the phone to turn off...
Please turn on the phone by pressing the C key!
LangPackage: HUTCH_1
CDA: CDA102511/69
Revision: R14A
CXC: cxc1250490
Soft version: R1ED001 prgCXC1250210_GENERIC_WI
Trying to send loader...
OTP IMEI/CID/PAF: 351708-01-097674-X / 49 / 1
Phone Color: RED.
Phone CID: 49.
Leaving test mode...
Please turn on the phone by pressing the C key!
LangPackage: HUTCH_1
CDA: CDA102511/69
Revision: R14A
CXC: cxc1250490
Soft version: R1ED001 prgCXC1250210_GENERIC_WI
Entering explorer mode...
OTP IMEI/CID/PAF: 351708-01-097674-X / 49 / 1
Initializing GDFS...
Connecting to server: US
Bypassing security...
Credits: 3985
Credits left: 3982
Connecting to server: US
Credits: 3982
Credits Left: 3935



TUMTSUnlockPhoneThread finished at: 2007/01/18 04:42:13

Terminated with error: 00014009. 0002100B. 0002E130. 00022232. 00029128
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBP3RIDV]

TUMTSUnlockPhoneThread started at: 2007/01/18 04:43:38


now set becomes dead and does not powered on kindly tell me what to do
i have flashed the set and also repaired erom but invain


waiting for reply

WBR

[sarfraz]

sir,

i am facing same problems now the set is dead during the unlock

[gsmuk]

i am facing the same problem here.....UB kill 2 phone today Z610 and W850..........i hv unlock 20 set last 2 days with out problem......today it start kill phone both on flashing and unlock...now phone cannot connect by usb cable any more....please do some thing UB

gsmuk

[universalbox]

Please wait till we fix the problem. Anyway you can repair your phones by starting the unlock procedure with FBUS cable and re-plug the phone to USB cable after SIMLock signing.

[falak]

Originally Posted by universalbox

Please wait till we fix the problem. Anyway you can repair your phones by starting the unlock procedure with FBUS cable and re-plug the phone to USB cable after SIMLock signing.

but ll u refund credits i alredy lost 100
plz tell me??
br falak

[tersace]

Originally Posted by universalbox

Please wait till we fix the problem. Anyway you can repair your phones by starting the unlock procedure with FBUS cable and re-plug the phone to USB cable after SIMLock signing.

So you mean we have to do SIMLock signing again when it asks us to skip? so more credits lost?

Please let us know so we can repair this phone

Regards

[yeldar]

EDITED BY: yeldar

I think new update has bugs......

We had 2 dead phones and have lost 2x 50 credits by using fbus cable and re-assigning the lock status (pressed YES in simlock assigning instead of NO) just to get them back to life, and now we have to use 100 on each again to unlock them both!!!

Username is: yeldar

Credits needed: 100

WBR

yeldar

R3 Gsm Limited

[falak]

i already lost extra 50 50 +6 credits to get power on my set.but i think ub team ll refung this credit to us.i hope so
br falak

[mobiletechnics]

Originally Posted by universalbox

Please wait till we fix the problem. Anyway you can repair your phones by starting the unlock procedure with FBUS cable and re-plug the phone to USB cable after SIMLock signing.

Would it be possible for you to test a db2020 handset each time there is an update? This will ensure that no - one looses any credits & that (more importantly) the software is working!

BR MT

[tersace]

Ok

Everyone with a dead phone during unlock, here is the fix

1, Use fubus cable and press NO when it asks to skip SIMlock SIGN
2, power on phone when it asks to connect to DCU-60, the phone will come on
3, after process phone is unlocked an alive 100 credits gone
4, Try to get refund of first 50 credits lost

Worked for me

Regards

[gsmuk]

Originally Posted by universalbox

Please wait till we fix the problem. Anyway you can repair your phones by starting the unlock procedure with FBUS cable and re-plug the phone to USB cable after SIMLock signing.

i lost more than 200 credit + 2 dead phone


gsmuk

[pes]

and I have one dead k800..unlocking via UB.
I lost 50 credits + five tames flashing is 15 credits but still not solve the problem. phone still dead.

please help me ,but not only me , I see many people have this problem.

thanks pes

[lamar]

i have the same problem 1 k800i is dead

[pepgra]

Originally Posted by tersace

Ok

Everyone with a dead phone during unlock, here is the fix

1, Use fubus cable and press NO when it asks to skip SIMlock SIGN
2, power on (but I telephone this dead! ) phone when it asks to connect to DCU-60, the phone will come on
3, after process phone is unlocked an alive 100 credits gone
4, Try to get refund of first 50 credits lost

Worked for me

Regards

1, Use fubus cable and press NO when it asks to skip SIMlock SIGN
2, power on (but I telephone this dead! ) phone when it asks to connect to DCU-60, the phone will come on
3, after process phone is unlocked an alive 100 credits gone
4, Try to get refund of first 50 credits lost

[drgmobile]

Originally Posted by tersace

Ok

Everyone with a dead phone during unlock, here is the fix

1, Use fubus cable and press NO when it asks to skip SIMlock SIGN
2, power on phone when it asks to connect to DCU-60, the phone will come on
3, after process phone is unlocked an alive 100 credits gone
4, Try to get refund of first 50 credits lost

Worked for me

Regards

Can anyone else confirm that they have tried this and it works? Don't really want to try and lose more credits than is necessary (then again I don't suppose anyone wants to try and lose more credits).