n 70 hangs on nokia
 

126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Reading Info...
Soft Version: V 05wk07v47 Date: 30-01-07 Type: RM-84 (N70) Pack: (c) Nokia.
Product code: 0539240
Product code: 0536420
Radio:
Original IMEI: 359566-01-********
Production serial: CTE955772
HW Version: 7003
DSP Version: rolf_05wk07v29p1
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 58 [040900040C16]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Executing self tests...
Passed [2E] ST_TAHVOINT_TEST
Passed [03] ST_UEM_CBUS_IF_TEST
Passed [0C] ST_EAR_DATA_LOOP_TEST
Passed [0D] ST_SIM_CLK_LOOP_TEST
Passed [38] ST_SIM_IO_CTRL_LOOP_TEST
Passed [21] ST_SLEEPCLK_FREQ_TEST
Passed [5D] ST_SIM_LOCK_TEST
Passed [5A] ST_SECURITY_TEST
Passed [02] ST_PWR_KEY_TEST
Passed [3A] ST_CURRENT_CONS_TEST
Not executed [14] ST_CMT_APE_WAKEUP_TEST
Passed [2A] ST_BACKUP_BATT_TEST
Passed [60] ST_RADIO_TEST
Fail [31] ST_HOOKINT_TEST
Passed [65] ST_VIBRA_TEST
Passed [56] ST_BTEMP_TEST
Passed [53] ST_CDSP_RF_BB_IF_TEST
Passed [55] ST_CDSP_RF_SUPPLY_TEST
Passed [4A] ST_CDSP_TX_IQ_TEST
Passed [4B] ST_CDSP_TXC_DATA_TEST
Passed [51] ST_CDSP_WCDMA_TX_POWER_TEST
Passed [4F] ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed [50] ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Not executed [52] ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed [4D] ST_CDSP_PWR_DETECTOR_BIAS_TEST
Not executed [00] ST_CDSP_GSM_TX_POWER_TEST

reflash phone if not solve, check hardware thinks

100 % hardware fault
check smps ic

N70 Hanging on Nokia Logo...
 

I am having this same problem. I flashed the phone with the same software that was already on the phone. Now, it is stuck on the Nokia startup logo. I have tried flashing it with usb, but it will not connect anymore.

~

post here log, for diagnostics exact problem we need all necessary info. about your problem