GSM-Forum - N95-3 Rm-160 Dead on middle of the unlock (notp) process

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Universalbox (https://forum.gsmhosting.com/vbb/f305/)

- - N95-3 Rm-160 Dead on middle of the unlock (notp) process (https://forum.gsmhosting.com/vbb/f305/n95-3-rm-160-dead-middle-unlock-notp-process-633922/)

N95-3 Rm-160 Dead on middle of the unlock (notp) process

Hi Ub Team,

Dam.n it ... My first experience with bb5 and now voila! Dead...
I used 7 pin adapter, one that has battery (9v) connector...

Please see log attached

Code:

TBB5PatchUnlockThread started at: 2008/11/19 15:16:13

--------------------------------------------------------------------------------

MCU Nokia Version: 1.124, and up to date.

SMCU Nokia Version: 1.42, and up to date.

MCU BB5NoTP Version: 1.042, and up to date.

SMCU BB5NoTP Version: 1.16, and up to date.

Input power: 4.74V OK.

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

Flashing file:

BB5 [BB5 ALGORITHM] MCU File: PatchUnlock 0 kB

 Speed: [3000k, 3250k, 3250k, 98k] Baud.

 Supported Hardwares: [400C192101021103]

 Supported APE Hardwares: [24200705]

Input power: 4.78V OK.

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Boot Loader: RAPIDOv11_2nd.fg 15 kB

 Version: 1.30.0

 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

Total time: 6,6 sec.

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Phone powered.

Reading Info...

Soft Version: V 06wk41v38 Date: 13-08-07 Type: RM-160 (N95-6) Pack: (c) Nokia 

Product code: 0557681

Original IMEI: ******************

Production serial: MAI550885

HW Version: 4020

DSP Version: 06w41pb_07w32

LCD Version: 

APE ADSP Version: 256

SIMLock service: SIMLOCK SERVER [040A0C060A04]

Profile bits: 0000000000000000

Simlock config: 7223100000000000

 Invalid codes entered: 0 / 0

 Block: 1; Lock: 1; State: Closed; Data: 74402F

 Block: 2; Lock: 1; State: Closed; Data: 74402F

 Block: 3; Lock: 1; State: Closed; Data: 722310

 Block: 4; Lock: 1; State: Closed; Data: 722310

 Block: 5; Lock: 1; State: Closed; Data: 74810F

 Block: 6; Lock: 1; State: Closed; Data: 74810F

Security code: 12345

Writing PM...

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

--------------------------------------------------------------------------------

TBB5PatchUnlockThread finished at: 2008/11/19 15:18:53

Please, im stuck, dont want do make more n95 because of this...
And i have a lot of work to do.

hi
it is verry sad u got handste dead while unlocking. dont worry as universalbox said they will update for repair dead handset( dead while unlocking ). u can try to reflash handset. but sadly u need other tool for flashing coz ub cannot flash it.
B.R.
BABBU

Thats a really bad news for me and for my *******r. Thanks for replying me Mr Babbu
Its supposed to work, need final word from UB Team...

Remember, i can power up the phone, Nokia Logo appears just for a few seconds and power off automatically...

br

Even you flash it with another tool you only will see Nokia and reboot Because the boot loader is missing

Quote:

Originally Posted by MasterCodec (Post 3872746)

Even you flash it with another tool you only will see Nokia and reboot Because the boot loader is missing

what u talk about
all will done
modified cable with latest version will done

Quote:

Originally Posted by rushwhq (Post 3872001)

Hi Ub Team,

Dam.n it ... My first experience with bb5 and now voila! Dead...
I used 7 pin adapter, one that has battery (9v) connector...

Please see log attached

Code:

TBB5PatchUnlockThread started at: 2008/11/19 15:16:13

--------------------------------------------------------------------------------

MCU Nokia Version: 1.124, and up to date.

SMCU Nokia Version: 1.42, and up to date.

MCU BB5NoTP Version: 1.042, and up to date.

SMCU BB5NoTP Version: 1.16, and up to date.

Input power: 4.74V OK.

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

Flashing file:

BB5 [BB5 ALGORITHM] MCU File: PatchUnlock 0 kB

 Speed: [3000k, 3250k, 3250k, 98k] Baud.

 Supported Hardwares: [400C192101021103]

 Supported APE Hardwares: [24200705]

Input power: 4.78V OK.

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Boot Loader: RAPIDOv11_2nd.fg 15 kB

 Version: 1.30.0

 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

Total time: 6,6 sec.

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Phone powered.

Reading Info...

Soft Version: V 06wk41v38 Date: 13-08-07 Type: RM-160 (N95-6) Pack: (c) Nokia 

Product code: 0557681

Original IMEI: ******************

Production serial: MAI550885

HW Version: 4020

DSP Version: 06w41pb_07w32

LCD Version: 

APE ADSP Version: 256

SIMLock service: SIMLOCK SERVER [040A0C060A04]

Profile bits: 0000000000000000

Simlock config: 7223100000000000

 Invalid codes entered: 0 / 0

 Block: 1; Lock: 1; State: Closed; Data: 74402F

 Block: 2; Lock: 1; State: Closed; Data: 74402F

 Block: 3; Lock: 1; State: Closed; Data: 722310

 Block: 4; Lock: 1; State: Closed; Data: 722310

 Block: 5; Lock: 1; State: Closed; Data: 74810F

 Block: 6; Lock: 1; State: Closed; Data: 74810F

Security code: 12345

Writing PM...

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

Initializing phone...

Output power at Line1 3.97V is in range of: 4.00V ±10.0%

--------------------------------------------------------------------------------

TBB5PatchUnlockThread finished at: 2008/11/19 15:18:53

Please, im stuck, dont want do make more n95 because of this...
And i have a lot of work to do.

This is only because u dont use the latest version every time i think.

Because this bug was yesterday , but it was corrected asap, and new version was uploaded.
So after unlock u can't become dead phone...

Sorry Ub Team

But u're wrong, when i have done this, i used the latest version.
Can U tell me now how can i fix it?

Ub Team,
I updated my box and using the same cable, unlocked another n95-3 rm160 without problems (I posted the log on Successfully bb5 unlocked without (tp) topic.

Back to dead
Tried SIMlock repair and here is the log:

Code:

TBB5SimlockRepairThread started at: 2008/11/20 21:57:04

--------------------------------------------------------------------------------

MCU Nokia Version: 1.126, and up to date.

SMCU Nokia Version: 1.42, and up to date.

Input power: 11.59V OK.

Output power at Line1 3.93V is in range of: 4.00V ±10.0%

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

Flashing file:

BB5 [BB5 ALGORITHM] MCU File: ReadKeys 0 kB

 Speed: [3000k, 3250k, 3250k, 98k] Baud.

 Supported Hardwares: [400C192101021103]

 Supported APE Hardwares: [24200705]

Input power: 11.74V OK.

Output power at Line1 3.93V is in range of: 4.00V ±10.0%

Boot Loader: RAPIDOv11_2nd.fg 15 kB

 Version: 1.30.0

 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]

Max Flash Devices: 3

Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x010000

Flash ID 2: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000

Flash ID 3: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000

Signature: 00000000000000000000000000000000

Flash Loader: RAPIDOv11_algo.fg 186 kB

 Version: 1.31.0

 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]

APE Asic ID: 24200705

APE Asic Mode ID: 00

APE Public ID: 14BDD6CFF03D0A0DC56B29AA67C7F05E441D2BD5

APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000

Asic ID: 000000010000022600010006400C192101021103

EM Asic ID: 00000295

EM Asic ID: 00000B22

Public ID: 19E00112F67D0058C5C112ECE09E981573489E33

Asic Mode ID: 00

Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE

ROM ID: A8C1D6713E691FF8

--------------------------------------------------------------------------------

TBB5SimlockRepairThread finished at: 2008/11/20 21:57:25
 

Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0

MCU Boot Version: 1.069, and up to date.

SMCU Boot Version: 1.34, and up to date.

Ub, jawad, please give me a hand here...

Br

Quote:

Originally Posted by rushwhq (Post 3875787)

Ub, jawad, please give me a hand here...

Br

There is not answer. I have other N95 broken with the same problem that you. The update of 19th, broken our phones, and we cannt any response of UB Team.

Regards

Is your phone switch to local mode?
if yes, then make simple unlock procedure again.
If no then make repair simlock.

Updating... Lets see. .::Ja\/\/aD::. Simlock repair ?

Ok Ub, i gonna try both.

Quote:

Originally Posted by .::Ja\/\/aD::. (Post 3875862)

Please update your Box
http://forum.gsmhosting.com/vbb/showthread.php?t=634546

Box updated and phone continue died

Quote:

Originally Posted by universalbox (Post 3876074)

Is your phone switch to local mode?
if yes, then make simple unlock procedure again.
If no then make repair simlock.

What can i do if phone dont accept any boot ? i cannt make any operation :confused:

Regards!