Nokia 6303c RM-443 Unlock?

[Jinx13]

Hi, I always get this errror..

TBB5ReadInfoThread 3.0.0.2941 with filepack 8.18 started at: 2013/08/29 19:07:48
--------------------------------------------------------------------------------
MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Initializing phone...
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
Soft Version: V 08.90 Date: 30-06-09 Type: RM-443 (6303C CLASSIC) Pack: (c) Nokia             
APE Core version: 
Product code: 0586654
Product code: 0575069
Radio: GSM900 / GSM1800 / GSM1900
Original IMEI: 358005-03-********
Production serial: KPD586652
HW Version: 2002
DSP Version: ICPR81_09w10_pre
LCD Version: SHARP
APE ADSP Version: 
SIMLock service: SIMLOCK SERVER [00000008020F]
Profile bits: 8000000000000000
Simlock config: 2343000000000000
 Invalid codes entered: 0 / 0
 Block: 1; Lock: 1; State: Closed; Data: 23430F
Security code: 12345
--------------------------------------------------------------------------------
TBB5ReadInfoThread 3.0.0.2941 finished at: 2013/08/29 19:08:25

Done.

TBB5SL3UnlockThread 3.0.0.2941 with filepack 8.18 started at: 2013/08/29 19:08:34
--------------------------------------------------------------------------------
MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Reading Info...
Soft Version: V 08.90 Date: 30-06-09 Type: RM-443 (6303C CLASSIC) Pack: (c) Nokia             
APE Core version: 
Product code: 0586654
Product code: 0575069
Radio: GSM900 / GSM1800 / GSM1900
Original IMEI: 358005-03-********
Production serial: KPD586652
HW Version: 2002
DSP Version: ICPR81_09w10_pre
LCD Version: SHARP
APE ADSP Version: 
SIMLock service: SIMLOCK SERVER [00000008020F]
Profile bits: 8000000000000000
Simlock config: 2343000000000000
 Invalid codes entered: 0 / 0
 Block: 1; Lock: 1; State: Closed; Data: 23430F
Security code: 12345
Reading PM...
Reading PM values...
Input power: 14.33V OK.
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
Input power: 14.31V OK.
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
--------------------------------------------------------------------------------
TBB5SL3UnlockThread 3.0.0.2941 finished at: 2013/08/29 19:08:58

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.000111C8
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBTEST99]

Can anyone help?

Thank you