cid 52 unlock step by step guide - GSM-Forum

Rezn · 10-15-2007, 19:38

got to ericsson UMTS tab.

select model in right hand corner. (some models new ones not listed eg. t650 and k530 in this case select k800)

make sure use smartcard is selected.

now if you have credits, remember cid 52 cost 100 credit to unlock = approx 32 usd or 30euro) then proceed.

click send log.

do procedure as with flashing and unlocking when say power on phone etc.

wait, can check UB website to after logging in to see your db2020 queue

when log calculated, usually 24-72 hour but sometimes up to 1 week (BE PATIENT dont blame UB as cid 52 is very special procedure to complete)
remember business days, not weekends counting.

when calculated, open UB select correct model again and tick use
smartcard.

press request log.

do procedure as with flashing and unlocking when say power on phone etc.

after process, click activate.

Now insert your original dcu-60 cable into usb port. make sure you have signed usb drivers for the phone you are going to unlock.

hold down "c" button when plugging into turned on phone. wait then release c after computer find.

computer will find phone and search for drivers, select where you have placed drivers. install all drivers

follow procedure on screen where it say it will take several minute etc.

wait.

YIPPIE phone is now unlocked.

MobilesDoctor · 10-16-2007, 11:38

Its Too Old Brother But Good Work

Rezn · 10-16-2007, 15:37

Quote:

Originally Posted by Mobile_1

Its Too Old Brother But Good Work

yeah I know but its for all the newbiez that keep asking

tazmania12 · 11-12-2007, 00:13

i plug to cable in but the computer is still askin for the cable

ebu mohammed-emin · 11-12-2007, 00:19

computer asking u driver !?!
selct manual search and
go in C/uni/files/ericsson/driver/ and select correct model
or wenn u plug with c hold then slect c/uni/files/ericsson/driver/gordongate

ebu mohammed-emin

10-15-2007, 19:38	#1 (permalink)
Rezn No Life Poster Join Date: Sep 2007 Location: -worldwide- Posts: 1,394 Member: 592460 Status: Offline Thanks Meter: 110	cid 52 unlock step by step guide got to ericsson UMTS tab. select model in right hand corner. (some models new ones not listed eg. t650 and k530 in this case select k800) make sure use smartcard is selected. now if you have credits, remember cid 52 cost 100 credit to unlock = approx 32 usd or 30euro) then proceed. click send log. do procedure as with flashing and unlocking when say power on phone etc. wait, can check UB website to after logging in to see your db2020 queue when log calculated, usually 24-72 hour but sometimes up to 1 week (BE PATIENT dont blame UB as cid 52 is very special procedure to complete) remember business days, not weekends counting. when calculated, open UB select correct model again and tick use smartcard. press request log. do procedure as with flashing and unlocking when say power on phone etc. after process, click activate. Now insert your original dcu-60 cable into usb port. make sure you have signed usb drivers for the phone you are going to unlock. hold down "c" button when plugging into turned on phone. wait then release c after computer find. computer will find phone and search for drivers, select where you have placed drivers. install all drivers follow procedure on screen where it say it will take several minute etc. wait. YIPPIE phone is now unlocked.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Guide: How to Activate SETOOL Step by Step	shahzaadbutt	SETool2	66	06-15-2023 11:12
[GUIDE] Step by Step Guide for Upgrading P3400 and P3400i ROM + FAQs	..::Mobile Smoker::..	HTC & PDA WM( With Touchscreen)	7	04-01-2012 16:41
PLS I NEED STEP BY STEP PROCEDURE HOW TO CHANGE K800i CID 49 TO 52	ojs	Cruiser Suite	1	03-31-2008 12:03
w580i cid 52 unlock done by cruiser :))))	karina23b	Cruiser Suite	0	11-25-2007 10:10
Step-by-step user guide for DETONATOR N95 unlock clip	PINKY_CHINA	Nokia Base Band 5 ( BB-5 )	15	10-11-2007 15:42

10-16-2007, 11:38	#2 (permalink)
MobilesDoctor No Life Poster Join Date: Oct 2004 Location: IRELAND Posts: 14,215 Member: 87357 Status: Offline Thanks Meter: 9,457	Its Too Old Brother But Good Work

11-12-2007, 00:13	#4 (permalink)
tazmania12 Junior Member Join Date: Sep 2007 Posts: 5 Member: 585343 Status: Offline Thanks Meter: 0	i plug to cable in but the computer is still askin for the cable

11-12-2007, 00:19	#5 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	computer asking u driver !?! selct manual search and go in C/uni/files/ericsson/driver/ and select correct model or wenn u plug with c hold then slect c/uni/files/ericsson/driver/gordongate ebu mohammed-emin