e90 killed by UB cant repair // 2 month - GSM-Forum

Valkensuit · 02-02-2009, 16:13

hi
its has been almost 2 month since UB killed my e90 during no tp unlock.

i tried everything to make it live again but failed

the ub made 2 files backup
one: 35365901698xxxx.BB5

days after i made several flashes and the phone could be read
35365901698xxx_NOTPBACKUP.PM

the only way i can flash is with ufs, ub cant flash or erase.

i flashed with latest version available of ra-6 v300.xxx

i dont have the original version of the phone.

support is really bad and they did not come with any reasonable solution

i did flash erase with ufs, flashed, pm and i did made ask/rpl service but at the moment of writting it gives error

here is flashing log when trying to flash with UB

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [XSR 1.5] MCU File: ra6_300.34.84_prd.c00 57 152 kB
Speed: [51k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0003192101001003, 000C192101001003, 0003192101001103, 000C192101001103, 0003192101001203, 000C192101001203, 0003192101002003, 000C192101002003, 4003192101001203, 400C192101001203, 4003192101002003, 400C192101002003, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103]
Supported APE Hardwares: [24200705]
Input power: 4,74V OK.
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101021103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
--------------------------------------------------------------------------------
TDCT4FlashPhoneThread 2.6.9.1947 finished at: 2009/02/02 12:05:16

Terminated with error: No available bootloader for this ID, probably bad cable [0001105A]
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBPN1LBJ]

Valkensuit · 02-02-2009, 16:40

this is after i flash, phone can be read from box (ufs) and then try to write rpl with UB

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Input power: 11,97V OK.
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101021103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
CMT.NPC section parsed
CMT.VARIANT section not found
CMT.CCC section parsed
CMT.HWC section parsed
CMT.RnD section not found
CMT.SIMLOCK section parsed
CMT.SIMLOCK_KEY section parsed
CMT.SUPERDONGLE_KEY section parsed
CMT.CMLA_KEY section parsed
CMT.WMDRM_PD section not found
APE.NPC section not found
APE.VARIANT section not found
APE.CCC section not found
APE.HWC section not found
APE.RnD section not found
Power off mode set.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: RPL 1 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [400C192101021103]
Supported APE Hardwares: [24200705]
Input power: 11,93V OK.
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
Boot Loader: RAPIDOv11_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]
Max Flash Devices: 2
Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x010000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAPIDOv11_algo.fg 186 kB
Version: 1.31.0
Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101021103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
--------------------------------------------------------------------------------
TBB5WriteRPLThread 2.6.9.1947 finished at: 2009/02/02 12:38:44

Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0.00011A83
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBPN1LBJ]

Ja\/\/aD · 02-03-2009, 11:06

please try to full erase phone with erase files,
flash with lastest firmware version .
then use ask to rpl service
write full pm (w/o 308) with sx

gsmuy · 02-06-2009, 13:10

I DID ALL THAT AND PHONE STILL DEAD, IT SHOWS NOKIA FOR HOURS THEN SHUT OFF.
please give me a solution that works

and besides:
UB CANT ERASE OR FLASH E90, ONLY HWK CAN.
If you think im wrong, please post DETAILED STEP BY STEP PROCEDURES FOR DOING THAT and if you can, show me a e90 log by UB being flashed
thanks again

kalvin · 02-06-2009, 17:04

are u try with JAF yet?? i'm also have the same problem.

gsmuy · 02-09-2009, 14:20

with jaf says "canot load cnt bootfile" when trying to write rpl

gsmuy · 02-09-2009, 14:49

with jaf says "Error finding cmt boot file... " when trying to write rpl

Ja\/\/aD · 02-09-2009, 21:33

it is Not JAF BLA BLA support area it is UNIVERSAL BOX Support forum, if you need really support Please don't talk about others Product!!

02-02-2009, 16:13	#1 (permalink)
Valkensuit Freak Poster Join Date: Jul 2008 Location: Uruguay Age: 39 Posts: 155 Member: 806365 Status: Offline Thanks Meter: 42	e90 killed by UB cant repair // 2 month hi its has been almost 2 month since UB killed my e90 during no tp unlock. i tried everything to make it live again but failed the ub made 2 files backup one: 35365901698xxxx.BB5 days after i made several flashes and the phone could be read 35365901698xxx_NOTPBACKUP.PM the only way i can flash is with ufs, ub cant flash or erase. i flashed with latest version available of ra-6 v300.xxx i dont have the original version of the phone. support is really bad and they did not come with any reasonable solution i did flash erase with ufs, flashed, pm and i did made ask/rpl service but at the moment of writting it gives error here is flashing log when trying to flash with UB MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.42, and up to date. Flashing file: BB5 [XSR 1.5] MCU File: ra6_300.34.84_prd.c00 57 152 kB Speed: [51k, 6500k, 6500k, 98k] Baud. Supported Hardwares: [0003192101001003, 000C192101001003, 0003192101001103, 000C192101001103, 0003192101001203, 000C192101001203, 0003192101002003, 000C192101002003, 4003192101001203, 400C192101001203, 4003192101002003, 400C192101002003, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103] Supported APE Hardwares: [24200705] Input power: 4,74V OK. Output power at Line1 3,93V is in range of: 4,00V ±10,0% APE Asic ID: 24200705 APE Asic Mode ID: 00 APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49 APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000 Asic ID: 000000010000022600010006400C192101021103 EM Asic ID: 00000295 EM Asic ID: 00000B22 Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A Asic Mode ID: 00 Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 -------------------------------------------------------------------------------- TDCT4FlashPhoneThread 2.6.9.1947 finished at: 2009/02/02 12:05:16 Terminated with error: No available bootloader for this ID, probably bad cable [0001105A] MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.34, and up to date. Device opened at USB->Universal Box [UBPN1LBJ]

02-02-2009, 16:40	#2 (permalink)
Valkensuit Freak Poster Join Date: Jul 2008 Location: Uruguay Age: 39 Posts: 155 Member: 806365 Status: Offline Thanks Meter: 42	this is after i flash, phone can be read from box (ufs) and then try to write rpl with UB MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.42, and up to date. Input power: 11,97V OK. Output power at Line1 3,93V is in range of: 4,00V ±10,0% APE Asic ID: 24200705 APE Asic Mode ID: 00 APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49 APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000 Asic ID: 000000010000022600010006400C192101021103 EM Asic ID: 00000295 EM Asic ID: 00000B22 Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A Asic Mode ID: 00 Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 CMT.NPC section parsed CMT.VARIANT section not found CMT.CCC section parsed CMT.HWC section parsed CMT.RnD section not found CMT.SIMLOCK section parsed CMT.SIMLOCK_KEY section parsed CMT.SUPERDONGLE_KEY section parsed CMT.CMLA_KEY section parsed CMT.WMDRM_PD section not found APE.NPC section not found APE.VARIANT section not found APE.CCC section not found APE.HWC section not found APE.RnD section not found Power off mode set. Flashing file: BB5 [BB5 ALGORITHM] MCU File: RPL 1 kB Speed: [3000k, 3250k, 3250k, 98k] Baud. Supported Hardwares: [400C192101021103] Supported APE Hardwares: [24200705] Input power: 11,93V OK. Output power at Line1 3,93V is in range of: 4,00V ±10,0% Boot Loader: RAPIDOv11_2nd.fg 15 kB Version: 1.30.0 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105] Max Flash Devices: 2 Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x010000 Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000 Signature: 00000000000000000000000000000000 Flash Loader: RAPIDOv11_algo.fg 186 kB Version: 1.31.0 Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105] APE Asic ID: 24200705 APE Asic Mode ID: 00 APE Public ID: 4F9151E460146D8D57AB12AF6ADE813506183E49 APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000 Asic ID: 000000010000022600010006400C192101021103 EM Asic ID: 00000295 EM Asic ID: 00000B22 Public ID: 1200021102C10058E16A3B08FEE3B5A2A341102A Asic Mode ID: 00 Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 -------------------------------------------------------------------------------- TBB5WriteRPLThread 2.6.9.1947 finished at: 2009/02/02 12:38:44 Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0.00011A83 MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.34, and up to date. Device opened at USB->Universal Box [UBPN1LBJ]

02-03-2009, 11:06	#3 (permalink)
Ja\/\/aD No Life Poster $Ja\/\/aD's Avatar$ Join Date: Sep 2004 Location: Aunlock Age: 43 Posts: 18,049 Member: 80354 Status: Offline Sonork: 100.1577575 Thanks Meter: 21,659	please try to full erase phone with erase files, flash with lastest firmware version . then use ask to rpl service write full pm (w/o 308) with sx

02-06-2009, 13:10	#4 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	I DID ALL THAT AND PHONE STILL DEAD, IT SHOWS NOKIA FOR HOURS THEN SHUT OFF. please give me a solution that works and besides: UB CANT ERASE OR FLASH E90, ONLY HWK CAN. If you think im wrong, please post DETAILED STEP BY STEP PROCEDURES FOR DOING THAT and if you can, show me a e90 log by UB being flashed thanks again

02-06-2009, 17:04	#5 (permalink)
kalvin Insane Poster Join Date: Apr 2007 Posts: 68 Member: 494660 Status: Offline Thanks Meter: 4	are u try with JAF yet?? i'm also have the same problem.

02-09-2009, 14:20	#6 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	with jaf says "canot load cnt bootfile" when trying to write rpl

02-09-2009, 14:49	#7 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	with jaf says "Error finding cmt boot file... " when trying to write rpl

02-09-2009, 21:33	#8 (permalink)
Ja\/\/aD No Life Poster $Ja\/\/aD's Avatar$ Join Date: Sep 2004 Location: Aunlock Age: 43 Posts: 18,049 Member: 80354 Status: Offline Sonork: 100.1577575 Thanks Meter: 21,659	it is Not JAF BLA BLA support area it is UNIVERSAL BOX Support forum, if you need really support Please don't talk about others Product!!