SE K810i 5 Locks Close Not CSCA Unlock Credit Loss

[rajinder1978]

Hi I tryed to unlock SE K810i because this has close all 5 Locks. My 10 Credit are lost but not seccuss in second step. I m sending a Log report:


Step 1 Send Log:
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Please turn on the phone while pressing the C key!
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
LangPackage: EUROPE_2
CDA: CDA102779/32
Revision: R1A
CXC: cxc1250813
Soft version: R1JC002 prgCXC1250811_GENERIC_SM
Initializing GDFS...
Connecting to server: US3
Credits: 70
Credits Left: 60
--------------------------------------------------------------------------------
TUMTSSendSECSLogThread 2.7.5.2072 finished at: 2009/04/30 20:11:07
Done.


Step 2 Request Log:
TUMTSGetSECSResultThread 2.7.5.2072 started at: 2009/04/30 20:29:01
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Please turn on the phone while pressing the C key!
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
LangPackage: EUROPE_2
CDA: CDA102779/32
Revision: R1A
CXC: cxc1250813
Soft version: R1JC002 prgCXC1250811_GENERIC_SM
--------------------------------------------------------------------------------
TUMTSGetSECSResultThread 2.7.5.2072 finished at: 2009/04/30 20:29:10
Terminated with error: Error opening USB device [00017118].00024405.00024478.00024580.00024492.00024493


Step 3 When I tryed Request Log with RJ45 cable:
TUMTSGetSECSResultThread 2.7.5.2072 started at: 2009/04/30 20:31:18
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.05V is in range of: 4.00V ±10.0%
Output power at Line2 4.99V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 920kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
Output power at Line1 4.05V is in range of: 4.00V ±10.0%
Output power at Line2 4.99V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 920kBaud.
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
Leaving test mode...

Please send me the solution asap.

Regards
Rajinder Aggarwal

[MobilesDoctor]

Flash your phone with another firmware. if still same then do unlock again .

[rajinder1978]

Originally Posted by MobileDoctor's

Flash your phone with another firmware. if still same then do unlock again .

Sir How can i Flash this phone because This phone CID49 & not able to Upgrade CID52 or CID53:

TUMTSWriteGDFSFileThread 2.7.5.2072 started at: 2009/05/01 00:17:05
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.05V is in range of: 4.00V ±10.0%
Output power at Line2 4.74V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 920kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
Output power at Line1 4.05V is in range of: 4.00V ±10.0%
Output power at Line2 4.72V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 920kBaud.
OTP IMEI/CID/PAF: 004601-02-******** / 49 / 0
Leaving test mode...

Always stuck on Leaving test mode.
I have to tryed again full unlock but same problam here. If this problam nis not Solve then Please return my 10 Credits.

Regards
Rajinder Aggarwal