Unable to flash Nokia N70-1 Rm-84

[vikram007]

hi i have 2 Nokia N70-1 RM-84 phones with white display. iam unable to flash and i get the following error................


MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: RM84_50638301.C0 30 107 kB
Speed: [650k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200]
Supported APE Hardwares: [17100701, 17100702]
Input power: 4.64V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv2_2nd_fps8.fg 15 kB
Version: 1.12.5
Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200]
Max Flash Devices: 1
Flash ID 1: 00EC2250 - 0000 Rev: 0121 Manufacturer: Samsung MSB: 00 SectorSize: 0x020000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
Version: 1.12.5
Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
APE Asic ID: 17100701
APE Asic Mode ID: 00
APE Public ID: FF01BC40B6138DB99560F10BD153E6FA6CFF4241
APE Hash: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE ROM ID: AB5E4ADB27A06946
Asic ID: 000000010000022600010006000C192101002200
EM Asic ID: 00000232
EM Asic ID: 00000352
Public ID: 02400115549E49515579D15571DBD83D13184ED8
Asic Mode ID: 00
Hash: E9EFF4BFAA5393217CA6B17755FC3E14
ROM ID: F28A211FCEA7B19D
--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008/07/30 20:19:03
Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBPN1G31]

[Ja\/\/aD]

please check you cable, it is communication error

[gsm_era]

chk cable schematics used by universal box , now new cables specially comin for particular box

[dil_PAKISTANI]

If FBUS is not available try on DCKU2 cable,Its 99% cable problem.Try & post result.







Regards
Shoaib Electronics

[gsm_era]

Originally Posted by dil_PAKISTANI

If FBUS is not available try on DCKU2 cable,Its 99% cable problem.Try & post result.







Regards
Shoaib Electronics

bro he cant use dku -2 coz his set is on white light, for flashing with dku-2 it need drivers so in white light mode no driver can be installed , he must go for dead usb if this model supports it , as per my knowledge n-70 do not support dead usb flashing