SST SERVICE TOOLBOX V 6.74 Now with support of Siemens CF75 - Page 5 - GSM-Forum

magixian · 02-08-2006, 00:36

Quote:

Originally Posted by gsmshahrayar

hi dear...
SST Support Area have all EEprom files..
Thanks bye
From LockUnlock Team

where is it please! give me a link

djpaul · 05-31-2006, 16:05

I test this testpoin an works 100% .

1. Do not use RED line.
2. Do NOT use DIODE.
3. Folow BLUE LINE for TEST POINT.

BR

mosharrof007 · 06-04-2006, 11:20

Hi
sst-gsm do you know what is the problem

Flash Chip: 0089880D (Intel)
Bootcore IMEI: 353669003112781
Please connect the needle to Test-point
Starting Unlock Procedure ...
then
reading data
and phone not ok ,the phone is m65.
do you know something ?

Vansy · 08-20-2006, 11:27

CF75, after unlcked, cannot power on only bib sound, I ready tried to flash full flash and repair but the same only can appear test mode. original v10, Can someone help me ?

lehus123 · 09-19-2006, 07:24

Quote:

Originally Posted by Jankovic

Hello

Yes phone have Testpoint open it and look board then all will be clear if still dont know contact me priovate i will help you .....

Mario

siemens cx65 on orange
imei: 353541002177208
unlocking code pls.

lehus123 · 09-19-2006, 07:26

siemens cx65 on orange
imei: 353541002177208

unlocking code pls.

hallo · 09-19-2006, 12:48

Quote:

Originally Posted by lehus123

siemens cx65 on orange
imei: 353541002177208

unlocking code pls.

..You must write a biger fonts and numbers if You wont that code....

qualite4 · 09-25-2006, 17:59

thank you brother for this work

M tel · 07-26-2007, 11:26

a 70 siemens mobile set no power on .i flash fully flash flash is ok .but phone is no open.sent a solution

07-26-2007, 11:26	#69 (permalink)
M tel Crazy Poster Join Date: Apr 2007 Posts: 51 Member: 493979 Status: Offline Thanks Meter: 3	a 70 dead no power on a 70 siemens mobile set no power on .i flash fully flash flash is ok .but phone is no open.sent a solution

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
SST SERVICE TOOLBOX V 6.50 Now with support of Siemens A70	SST-GSM	SST-Dongle	51	11-07-2005 14:43
SST SERVICE TOOLBOX V 6.74 Now with support of CF75	SST-GSM	Main Sales Section	0	10-13-2005 09:49
SST SERVICE TOOLBOX V 6.50 Now with support of Siemens A70	SST-GSM	Main Sales Section	0	08-06-2005 13:41
SST SERVICE TOOLBOX V 6.30 Now with support of Siemens C62 v25- v28 and CFX65	SST-GSM	Main Sales Section	0	07-13-2005 06:32
SST SERVICE TOOLBOX V 6.30 Now with support of Siemens C62 v25- v28	SST-GSM	Main Sales Section	0	06-14-2005 23:42

06-04-2006, 11:20	#63 (permalink)
mosharrof007 Freak Poster Join Date: Oct 2003 Location: Bangladesh Age: 54 Posts: 150 Member: 41289 Status: Offline Sonork: 100.1577959 Thanks Meter: 4	Hi sst-gsm do you know what is the problem Flash Chip: 0089880D (Intel) Bootcore IMEI: 353669003112781 Please connect the needle to Test-point Starting Unlock Procedure ... then reading data and phone not ok ,the phone is m65. do you know something ?

08-20-2006, 11:27	#64 (permalink)
Vansy Banned Join Date: Sep 2003 Location: Cambodia Posts: 1,522 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190	CF75, after unlcked, cannot power on only bib sound, I ready tried to flash full flash and repair but the same only can appear test mode. original v10, Can someone help me ?

09-19-2006, 07:26	#66 (permalink)
lehus123 Junior Member Join Date: Aug 2006 Posts: 22 Member: 337434 Status: Offline Thanks Meter: 0	siemens cx65 on orange imei: 353541002177208 unlocking code pls.

09-25-2006, 17:59	#68 (permalink)
qualite4 Junior Member Join Date: Sep 2006 Posts: 2 Member: 346131 Status: Offline Thanks Meter: 0	thank you brother for this work