SST v 7.53 - New "Direct Boot " mode enable connection without test-point.
 

SST v 7.53 is already available for download.
New "Direct Boot " mode enable connection without test-point for X65/X75 SGOLD models.
Please remember to select "Direct Boot " after model and speed selection.

PS. Maximum Connection speed with this boot method should not exceed 460k!

Another time saving feature of SST. Luckily have one for test....thanks sst team!!!

maybe someday there will be no more tp.............

Lucky my old dongle is working. After upgrade antirivus I cannot run sst program , always say cannot find " kernel32.dll". I Thing dongle spoiled after reinstall driver many times still not work. Now I know it detect by antivirus program. after deactive program run normal. Thank you for new update.

what antivirus do you use? for me i use nod32 and it works fine. no problem whatsoever.

s75 and s68 dont work

Yes some of the new models may not support this method.

Good Update
Gread Work Thanks SST Team

SL75 (with software faliure) not working !!! maybe direct boot working with good phone ?

COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!
COPYCAT!!!

stolen solution from Griffin Team!

regards: Profiler

COPY CAT ****
You talk like Zuleah man :)

Models S75, SL75 S68 and EL71 do not support direct boot method as this boot authority bypassing backdoor is too old and already cleared by Benq-Siemens ! Use java midlet("Boot Password" method) for SL75 and test point method for S68 and EL71 instead of it.
The following models are supported by direct boot method:

• C65,C6v and etc.
• CX65,CX70,CXI70
• M65
• S65
• SL65
• SK65
• C72
• C75
• CX75
• M75

The adviced maximum connection speed using this method is 460800.
After first connection the phone may be connected using "patched boot" method

i need sst new verion

http://www.sst-gsm.com/scard/SST7_Setup.exe

not working on c72... it gives service mode error.

sorry. it worked after second try... great work.

Hi!
Please, cable schematic for A31 or similar phone.
Many thanks!

Here are the pinouts for A31 working
Keypad up 1-2-3-4-5-6-7-8-9-10-11-12

3 = Tx
4 = Rx
5 = GND

Hi
Please need help to unlock Siemens C75 Bootcore imei problem this is log:
Phone model changed to: C75
Phone IMEI : 356272001xxxxxx
Boot Authority Bypassing Started! Please Wait!
Flash Chip : 0089880D (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: C75
FIRMWARE VERSION: 11
LANGUAGE GROUP: lg1
Thanks

just click unlock button (its only fake Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)

Thanks niketlen for u help

can you pls give me boxone box driver........


i cant see it in support..............

driver is here
http://www.sst-gsm.com/scard/SST_BoxeOne_Setup.exe
br
nike

now sst doesnt detect my dongle after setup...



pls advise how to remove all drivers in my pc......


i need to remove all backup drivers of rockey5 from my pc.. but i dont w/c file to delete.

New SST v7.55 is alrerady available for download!
 

1. rockey5 drivers are here
C:\Program Files\Software Installation Information\Rockey5
2. to remove or repair rockey5 drivers use this
http://www.sst-gsm.com/scard/Drv_setup.exe
3. what kind dongle You have ?
this old rockey5 dongle or this BoxOne dongle 4. if You have rockey5 dongle use ONLY this SST
http://www.sst-gsm.com/scard/SST7_Setup.exe
with this drivers http://www.sst-gsm.com/scard/Drv_setup.exe
5. if You have BoxOne dongle use ONLY this STT
http://www.sst-gsm.com/scard/SST_BoxeOne_Setup.exe
drivers are included

br
nike

HELLO EVERY BODY I NEEDSST V.7.53 PLZ GIVE ME A USER NAME AUR PASSWORD http://www.sst-gsm.com/scard/SST7_Setup.exe

for user and password go here [email protected] :)
br
nike

my system is ****d up with the drivers, i hav rockey5 dongle i bought only the box and i need drivers.... now my dongle is detected by xp but sst exe dont recognize it...

is there anyone kind a help me with this.......

1.copy ser2pl.sys and SER9PL.sys C:\WINDOWS\system32\drivers
2.delete unkown or bad device from device manager
3.install again form this drivers SST Cable drivers.zip (from attach files)
4.post result
br
nike

sst gsm
i try to connect c6v direct boot for unlock , phone is dead how to solve please verry urgent

If there is an error during "Direct Boot" due to a too high speed for example
(We recomend maximum connection speed 460800 b/s), then try to connect the phone in "patched boot " mode select "boot recovery" and press repair.
Also make sure you select the right phone type.

Hy Niketlen how i can realise sst pass@nickname?

so they had done a very good job but after long time, pls do something for every models with out test point, i thing that would be the ever best job in the world.

many many thanks for that.

Ghost_gsm.

so nice update, many many thx

Thanks "Direct Boot"

Direct boot is kiled CX75 in readed flesh, and repair flesh is not repaire phone:mad:
phone is repeire Martech box:mad:

help! Management
 

Management it is not very good that you like my English, and please ask here can announce does ask for helping of Chinese stick? thank!

emege saygı duymak lazım

@SST Team
 

It will be great, If I can access support area through an aplication windows with my SST dongle inserted. like vygis or jaf or NS.

hello every one i need SST V.7.53 plz give me path

i need user name and pass for SST v7.53 plz help me

pls change your avarter, i am not enjoying looking at it!

what is problem ??????????????????????????

C65,C6v and etc TEST WORK THANK TEAM

very good effort my dear , try to be more accurate next update

herşey için teşekürler

i need smart card dongle driver for SST BoxOne plz upload here.

thanx


BR

http://www.sst-gsm.com/scard/SST7_Setup.exe

I Need SST USER NAME OR Password

thanks sst team for nice update