1600 contact service problem - GSM-Forum

denard · 04-15-2007, 13:25

i always flash this phone 1600 without succeed. flashing proceedure is ok until the end but phone still "contact service". even if i change version of flash. when phone still connect to box, if i initialise normal mode, i have inser sim card but when disconnect from box, "contact service". what solution for that?

bilousoft · 04-15-2007, 13:35

i have same problm bro i flash it with all version avaible phone ok but wen i put sim,(invalid sim card) and contact service.any solution with ufs ??

hicvb7 · 04-15-2007, 14:15

this solution works 100/100 with me
ecrase flash
flash phone with version 3.42
UI setting
phone work 100/100
post resolt plz
hichem

Arox · 04-15-2007, 15:00

nop. used higher version! and all OK

hicvb7 · 04-15-2007, 15:04

higher version..still the same problem
u must flash it with 3.42

bilousoft · 04-15-2007, 15:15

Quote:

Originally Posted by hicvb7

this solution works 100/100 with me
ecrase flash
flash phone with version 3.42
UI setting
phone work 100/100
post resolt plz
hichem

not work

Quote:

Originally Posted by Arox

nop. used higher version! and all OK

i flash phone with the last version and still contact service there are not solution with ufs

.::AD Com::. · 04-15-2007, 15:20

Erase Full flash
phone Full flash with latest version 6.00.
Mcu + ppm + cnt After flash complete write corect pm file
init simlock + UI setting
Note: ufs will not init simlock latest version 6.00 So use jaf
if it is not avialable flash phone with version 3.42
if the phone still in same condition then
See the Charging conecter in & out side if water damge then clean that

Allunlockingsource · 04-27-2007, 18:22

u flash with mobile 3.42 verion your problem solve 100%

talhaawan · 04-28-2007, 12:16

ecrase flash
flash phone with version 3.42
UI setting
phone work fine

rehman9 · 04-30-2007, 15:19

unlock with jaf all ok

mail0 · 04-30-2007, 15:51

Flash back software version, who was before flashing. 100% working

04-15-2007, 13:25	#1 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	1600 contact service problem i always flash this phone 1600 without succeed. flashing proceedure is ok until the end but phone still "contact service". even if i change version of flash. when phone still connect to box, if i initialise normal mode, i have inser sim card but when disconnect from box, "contact service". what solution for that?

04-15-2007, 15:20	#7 (permalink)
.::AD Com::. Freak Poster Join Date: Apr 2007 Location: P A K I S T A N Posts: 152 Member: 486626 Status: Offline Thanks Meter: 89	Erase Full flash phone Full flash with latest version 6.00. Mcu + ppm + cnt After flash complete write corect pm file init simlock + UI setting Note: ufs will not init simlock latest version 6.00 So use jaf if it is not avialable flash phone with version 3.42 if the phone still in same condition then See the Charging conecter in & out side if water damge then clean that Last edited by .::AD Com::.; 04-15-2007 at 16:05.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 1600,1110i contact service problem	gsm_cdma_ufs	Nokia Hardware & Hardware Repair	18	10-13-2010 16:23
1600 Contact Service Problem	ziasim	Nokia Digital Core Technology 4 ( DCT-4 )	15	11-06-2009 10:30
1600 hardware contact service problem	rajdodani	Nokia Hardware & Hardware Repair	5	01-22-2009 10:04
1600 Contact Service Problem	ameho0102	Nokia Hardware & Hardware Repair	1	06-11-2008 15:25

04-15-2007, 13:35	#2 (permalink)
bilousoft No Life Poster Join Date: Dec 2005 Location: in my mind Age: 43 Posts: 824 Member: 204662 Status: Offline Thanks Meter: 91	i have same problm bro i flash it with all version avaible phone ok but wen i put sim,(invalid sim card) and contact service.any solution with ufs ??

04-15-2007, 14:15	#3 (permalink)
hicvb7 No Life Poster Join Date: Apr 2007 Location: Algeria Posts: 965 Member: 483440 Status: Offline Thanks Meter: 191	this solution works 100/100 with me ecrase flash flash phone with version 3.42 UI setting phone work 100/100 post resolt plz hichem

04-15-2007, 15:00	#4 (permalink)
Arox Junior Member Join Date: Aug 2006 Posts: 15 Member: 329164 Status: Offline Thanks Meter: 2	nop. used higher version! and all OK

04-15-2007, 15:04	#5 (permalink)
hicvb7 No Life Poster Join Date: Apr 2007 Location: Algeria Posts: 965 Member: 483440 Status: Offline Thanks Meter: 191	higher version..still the same problem u must flash it with 3.42

04-27-2007, 18:22	#8 (permalink)
Allunlockingsource No Life Poster Join Date: Aug 2006 Location: SPAIN-----UK Posts: 2,037 Member: 333439 Status: Offline Sonork: 100.1589101 Thanks Meter: 623	u flash with mobile 3.42 verion your problem solve 100%

04-28-2007, 12:16	#9 (permalink)
talhaawan Freak Poster Join Date: Feb 2005 Age: 41 Posts: 291 Member: 121100 Status: Offline Thanks Meter: 5	ecrase flash flash phone with version 3.42 UI setting phone work fine

04-30-2007, 15:19	#10 (permalink)
rehman9 No Life Poster Join Date: Dec 2004 Posts: 529 Member: 99407 Status: Offline Thanks Meter: 53	unlock with jaf all ok

04-30-2007, 15:51	#11 (permalink)
mail0 No Life Poster Join Date: Feb 2006 Location: URL - UnlockRepairLandia Age: 41 Posts: 866 Member: 236218 Status: Offline Thanks Meter: 35	Flash back software version, who was before flashing. 100% working