GSM-Forum - 1600 Erasing Error

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- HWK (https://forum.gsmhosting.com/vbb/f311/)

- - 1600 Erasing Error (https://forum.gsmhosting.com/vbb/f311/1600-erasing-error-1089197/)

1600 Erasing Error

1st Boot: Ok, DCT4, UPP: 2201 [Rh-64] [2.1.0.1]
2nd Boot: u_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.79.0
Algorithm Ok, MSID: 845BDC145CFC225EAE369532A7
Decoded MSID: 3E4EBAE9-009232F3-A9000000
Encoded FAID: 2034B2D6-C84EF73E-E4D0C211
IMAGE: rh64_07.020
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:32
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:11
IMAGE: rh640_nai7.02mg
Erasing: 0x01380000-0x013BFFFF ...
Erasing Error: 10, at: 0x01380000-0x0139FFFF, 940102, Time: 00:01
Process Failed, Repowering Mobile

Simply clean the board then rehot the pcb then flash the phone.

Br.
Vijendra Saini.

Quote:

Originally Posted by AniAxn (Post 6299127)

Erase Flash
Full Flash Again
Write good PM

if same Check cable or use Speed= normal or slow

Note:- Many times its Flash IC Problem...!

Munna.

Quote:

Originally Posted by GsmMunna (Post 6305087)

Erase Flash
Full Flash Again
Write good PM

if same Check cable or use Speed= normal or slow

Note:- Many times its Flash IC Problem...!

Munna.

yes i agree with you.

[email protected]