e1410 imei 000000000
 

i cant write imei, plz help me, i have hwk box, its very urzent

thanks in advance

just rebuilt imei,,,cant success???then try other cable,,make connector fresh with pcb cleaner first...:)

Try to write E2P from support area. If not done, then fullflash from another board

i write e2p, repair msl then presh rebuid imei but not done, log post under



Phone Must be with Battery and Powered On !
MSL : Active
To Make MSL Bypass in USB Mode, Use [Read Codes] at first !
IMEI: Error
IMEI Write Error

tell me what i do? its very urzent

thanks in advane

try to erase first then full flash the set with good e2p file , then rebuild imei . u can download e2p from hwk support server.

or here I upload the good e2p of e1410

Use rj45 cable,it is very easy to handle your job.
First flash the phone then write imei.

Br.
Vijendra Saini.

i use e210 cable, this is wrong?

as you see messages as "imei error", bla bla
cable is ok.
your problem is:
as e2p is changed must repair MSL at first,
only after can write imei

when i pres repair msl then i can see the log

Using MSL S/N: RW8S747457R
1st Boot Ok, McuId: 00030021, Rom: 00030021, 13-1.2 (Vision X122A)
2nd Boot Ok, McuId: 00030021, Rom: 00030021, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00890000_89010000 - Intel SIBLEY 256
Baud Rate Set: 460800 bps
Read Done, St: 0x21FE0000, 131072 byte(s), Time: 00:04, 0
Flashing NOR part...
Write Done, 131088 byte(s), Time: 00:05
MSL Repair Failed: MSL S/N Mismatch

tell me what i do

just tell me 1 think when i go to rite repair msl then hwk ask which i want to write e2p,bin etc before repair msl, then what i presh yes or no?

just tell me what i press yes or no?

write eepro modifity of support


example

e1410_xxxxxxxxx_xxxxxxxx_1

Just contact me in private.