HOW to erase nokia 5800.and sl3 ?on hwk
 

HOW to erase nokia 5800.and sl3 ?

if you do a delete any bb5 imei going to hurt you is corrupt imei 123456789

bro first create backup then select 5800 erase but imei 1234567890.

if you backup all certificates & then restore in the end will the imei still be 1234567.....?

but why you want to erase?
what problem you are facing?
after erasing you will damage its imei

i now after erasing will damage its imei 123?
i have full back up .

just tell me how to erase nokia 5800 ?

i use hwk.

you said (i now after erasing will damage its imei 123) that's mean you have erased !!
so now you must restore backup.......


good luck,

just tell me how to erase nokia 5800 ?
it's possible ?

use 256mb erase file by kashi4gul , try to search in forum u'll able to find d erse file.

place that erase file on ppm & flash ur phone, it will erase d complete flash of d mobile.

post result

HWK can not erase 5800
Some time ago i was try to do it with different ways - but FAILURE!

Hi. i dont have a phone that needs erasing of the flash but i would like to know for future reference if i do get 1 that needs erasing.

IF you erase bb5 flash with hwk can the imei be restored back to original

thanks for your advice

it depends on what phone you have under your hands, firstly you must make backup cert and pm with UFS and another tools to be sure you have the right backup of your IMEI+superdongle and simlock but for the second condition (backup PM) your phone must enter in local mode.

if you erase a died phone with only backup cert without backuping PM (specially field 308 and 120 if exist) you will lost your simlock validity and also your superdongle but dont worry ;);) you can repair superdongle for all phone models (PA_SL1+ PA_SL2 + PA_SL3) for simlock you can repair it only for PA_SL1+ PA_SL2 but with other tools.

if you have an nokia (PA SL1 + PA SL2 ) so you can with any problem erase ........flash, write eno file if exist write backup pm and cert.

if you have an Nokia PA_SL3 i will not advice you to make erase operation even if you have full backup imei and PM.

hope all clear now for you

good luck

but i many time try 1st make full backup rpl and simlock pm then nokia 5130 sl3 after Full erase operation imei 123? just resort all ok but simlock not resort .why

i have full back up hwk in

Rm-495_xxxxxxxxxxx_25201030407_HWCCmt
Rm-495_xxxxxxxxxxxx_25201030407_CCCCmt
Rm-495_xxxxxxxxxxxx_25201030407_RDCmt
Rm-495_xxxxxxxxxxxxx_25201030407_NPCCmt
Rm-495_xxxxxxxxxxxxxx_25201030407.ask
and full pm

after wr cert hi is sitll 123? imei and contact service..

why?

i have seen your post about recalculating NPC data for nokia in programming section can you upload here your your backup cert and PM.

maybe i can help you

but one other question:

what is the state of phone first time you maked your backup? maybe imei was damaged since the beginning.

and one other request:

post also product code for your phone you can see it under battery.

good luck

thank you for taking the time to explain. you have helped me save time instead of much searching

i never erased a nokia with hwk but did with another tool sucessfully(SL2 only)

if needed in future i now know my options;)

1- how about field 120 have you also maked backup for it?

2- what is product code from your phone?

if this phone is yours so is 5000752 is your user code??

yes with SL1 no problem at all, with SL2 few of them (like7210 supernova and others they have non restorable security zone) problem will be fixed but with more work than other phones.
with SL3 :mad::mad::mad: erase opperation will cause simlock who cant be restored even if we have full backup........

so be careful

my problem is now solved with this two step: 1- i flashed my phone with his original firmware and product code. 2- i restore my backup and all is fine

special thanks to adelkaha25

only MT-BOX can calculate ASK-RPL when write good RPL phone shut be working

HWK can not erase 5800
Some time ago i was try to do it with different ways - but FAILURE!