k600I dead AFTER FLASHING WITH hwk
 

HI

SOMEONE PLEASE HELP .. I HAVE A K600i THAT WAS BRINGING PROBLEM AND WAS FREEZING SO I DECIDED TO FLASH IT WITH HWK AND NOW PHONE IS DEAD

ODIA AND OTHERS PLEASE HELP

I DOWNLOADED FLASH FILES FROM HWK SITE AND TRIED BASICALLY ALL FILES .. PHONE IS K600i 36 RED IT WAS ORIGINALLY EMEA 6 AND EVERYTIME I TRY TO FLASH IT PHONE DOES NOT COMPLETE GIVING ME ERRORS

HERE IS THE SCREENSHOT PLEASE TELL ME WHERE AM I GOING WRONG ..I ALSO TRIED IT WITH SEMC TOOL BUT SAME PROBLEM

I FLASH THE 2 MCU FILES AND FS FILE AND ALL GOOD BUT REFUSES TO LOAD CS LOADER AND TO CUSTOMISE NOW PHONE IS DEAD

I HAVE THE SECURITY BACKUP TOO OF THE PHONE WHEN IT WAS WORKING AND I ALSO READ THE GDFS

McuId: 71000301FFFFFF, CID: 36, 4 (Red)
Mcert: A1_DB2000_36_RED
Baud Rate: 460800
Trying: CXC1325414_050331_1652_R3U{0101020401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 050207 0939 MATCXC1325414_FLASHLOADER R3U, Ok
IMEI : 356572-00-017551-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 200D, ST M30L0R8000T0
FlashImage: X_K600_CXC1250079_CHINA_R2G001.bin (36_RED)
FlashImage Certificate Accepted
MCU Part_1 Flashing Done, Time: 09:24
FlashImage: X_K600_CXC1250017_APAC1_R2G002.bin (36_RED)
FlashImage Certificate Accepted
MCU Part_2 Flashing Done, Time: 03:07
IMEI : 356572-00-017551-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 200D, ST M30L0R8000T0
OTP_F: 920E372D69225026 - Locked
OTP_U: 1480DC7005F04804 - Locked
FlId1: 200E
OTP_F: 8E122C3669223426 - Locked
OTP_U: 1480DC7005F04804 - Locked
050430 1714 MATCXC1327363_SEMC_CS_LOADER_1_R4B
Customization Info Err_08.5: Bad Resp Hdr 06,
McuId: 71000301FFFFFF, CID: 36, 4 (Red)
Mcert: A1_DB2000_36_RED
Baud Rate: 460800
Trying: CXC1325414_050331_1652_R3U{0101020401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 050207 0939 MATCXC1325414_FLASHLOADER R3U, Ok
IMEI : 356572-00-017551-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 200D, ST M30L0R8000T0
OTP_F: 920E372D69225026 - Locked
OTP_U: 1480DC7005F04804 - Locked
FlId1: 200E
OTP_F: 8E122C3669223426 - Locked
OTP_U: 1480DC7005F04804 - Locked
BLK_0: 0x21F00000
IMEI : 356572-00-017551-0
OTP CID: 36, GDFS CID: 36
ULCK : 0000 - Off
NCK : Open [5-5]
NSCK : Open [5-5]
SPCK : Open [5-5]
CCK : Open [5-5]
PCK : Open [5-5]
ESLK : Open [5-5]
Flags : 01FFFFFFFFFFFFFFFFFF [UMTS]
Security Backup: K600_35657200017551_21082006_74201.sim
Warning: Main Digest Calc Fails
Security Initialization Done, Time: 00:07
All Done, Total Time: 13:18


PLEASE HELP URGENT

THANKS
AK

Try doing a search in the forum for both the above quoted errors, this has already been covered many times.

Odia.

Odia thanks for replying ..believe me i have searched many forums and this one too and some tell me to Put a new GDFS file which i did with SEMC tool but now even worst i guess ,, also phone is dead .. and there is No GDFS file for K600i RED 36 for HWK ...

Can u please help me revive this phone much will be appreciatted man .. thanks anytime u r free let me know // my email address is [email protected] and same goes for MSN

Just need a lil guidance or maybe right files from you ...I hope u will help me just revive this phone so i can give it back to customer ,,

thanks
Mike

Restore main certificate A1_DB2000_36_RED, full flash the phone 2 x MCU and Cust/FS.

Change certificate to brown Init SB and then change back to red.

Why you are worried about the GDFS, you said you made a backup, also you have the important GDFS values in the security backup.

Odia.

Thanks Odia ... I have restored the DB2000 RED 36.BIP although there were 2 1 was DB2000 RED 36 EROM.bip and the other was the above file ..so i restored the non erom file and now its flashing 2 MCU and FS lets see what happens ..will give u feedback

thanks again for your prompt reply highly appreciatted
Mike

Hi Odia ,,

Still same problem ... FS getting customisation error .. i did as u told me // Maybe i am not doing something right so please help me boss

thanks
<ike

Try to flash 2 x MCU and then STOP, disconnect the phone from the cable, remove battery and then connect phone to cable and software then try to the the Cust/FS on its own.

If that does not work please write here the version of the flash files your using or the file names.

Odia.

Odia Thanks a lot for your help .. Actually i was restoring the D2000 RED 36.bip file but than i restored the d2000 red 36 Erom.bip and flashed the files and all was ok .. 100% good and working .,, Once again thanks a lot buddy and thanks for the support

Also i have a Z1010 that is flashing and customising ok ..but No network after unlocking and the unlock was done by someone else so i do not have any backup of this phone ,, when u insert the sim card phone freezes on searching and no keys work ,, but its not hardware for sure ,,, if i remove sim card all keys work good ,,, so definitely wrong unlocking ,,, Can u help me on this phone bro ...

Thanks a lot again for the K600i ..definitely learnt a lot today and also your post with GCT helped me revive my W550i as well ,,, so i hope u can help me with this Z1010 cuz i saw someone else in the forum after searching with the same problem but No solution found ...

Z1010 RED 16

Thanks
Mike

Hallo,

i'm looking for gfds for mine k600i. i use hwk. can someone plz upload here that file.

Thank you,

here is K600i GDFS read by me

Mate, about the "main digest calc fails" error! I get that error with EVERY unlock i do, its always the last thing to be displayed after unlocking!

You will get this message (note I said message, its a warning only not an error) with EVERY unlock of >=36 RED, it not possible to calculate the main digest with a RED certificate, you need to paint to brown first, I have told you this before on sonork.

Odia.

Sorry man, ive slept since then, but do remember you saying it now!

Will you be on sonork later tonight? Havent seen you online for a while!

Whene i try to flash the cu/fs i get this error messege:

McuId: 71000301FFFFFF, CID: 36, 4 (Red)
Mcert: A1_DB2000_36_RED
Baud Rate: 460800
Trying: CXC1325414_050331_1652_R3U{0101020401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 050207 0939 MATCXC1325414_FLASHLOADER R3U, Ok
IMEI : 356572-00-141981-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 890D, Intel RD38F4050L0YT
OTP_F: 070133306642289A - Locked
OTP_U: 1480DC7005D0A922 - Locked
FlId1: 8910
OTP_F: 070133306642C0BE - Locked
OTP_U: 1480DC7005D0A922 - Locked
050430 1714 MATCXC1327363_SEMC_CS_LOADER_1_R4B
Customization Info Err_08.5: Bad Resp Hdr 06,


And whene i try to flash the gdfs i get this error messege

McuId: 71000301FFFFFF, CID: 36, 4 (Red)
Mcert: A1_DB2000_36_RED
Baud Rate: 460800
Trying: CXC1325414_050331_1652_R3U{0101020401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 050207 0939 MATCXC1325414_FLASHLOADER R3U, Ok
IMEI : 356572-00-141981-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 890D, Intel RD38F4050L0YT
OTP_F: 070133306642289A - Locked
OTP_U: 1480DC7005D0A922 - Locked
FlId1: 8910
OTP_F: 070133306642C0BE - Locked
OTP_U: 1480DC7005D0A922 - Locked
050430 1714 MATCXC1327363_SEMC_CS_LOADER_1_R4B
Customization Info Err_08.5: Bad Resp Hdr 06,
GDFS Write Failed, Time: 0:30


Whe i flash only the mcu it give succesfull messege

Can someone tell me what ik have to do

thanks

Man read this thread from the begining and u will find the solution ,, dont be lazy bro ... read the whole thread and u will know ..ODIA has given perfect solution and tutorial in here ,,,

first use the restore button than go to KZF folder and special folder and restore D2000 RED 36 EROM.bip than flash both files everything will be ok ..dont forget to init SB

Are u sure this phone is CID 36 RED ? be sure before u do this

Mike