lg w3000 Bad Product Settings when select w3000 Bad Product Settings :confused: :confused: CAN ANY ONE TELL MY WHAT IS message Bad Product Settings I HAVE HWK AND MAKE cable LG 18 PIN cable CHARGE MOBILE cable OK OR NOT but GAVE MY message ( Bad Product Settings) |
Bad Product settings means this model not support by HWK yet! ;) Regards |
support !!!!! you must edit LG_GSM_En.ini and copy this info [W3000] BL0= LG_AD0_BOOT_1.bin MD= 0 CDS= 01000000 CSI= 00800000 ADS= 18000000 ASI= 00800000 PAT= 01002000 IMS= 328 ULS= 338 MBR= 3 |
and c2100 [C2100] BL0= LG_AD2_BOOT_1.bin MD= 1 CDS= 01000000 CSI= 00800000 ADS= 01800000 ASI= 00800000 PAT= 01002000 IMS= 328 ULS= 338 MBR= 3 |
and c1400 [C1400] BL0= LG_AD0_BOOT_1.bin MD= 0 CDS= 01000000 CSI= 00800000 ADS= 18000000 ASI= 00800000 PAT= 01002000 IMS= 328 ULS= 338 MBR= 2 |
and c3100 [C3100] BL0= LG_AD0_BOOT_1.bin MD= 0 CDS= 01000000 CSI= 00800000 ADS= 18000000 ASI= 00800000 PAT= 01002000 IMS= 328 ULS= 338 MBR= 2 |
good man tested ok 100% |
How. How to do that please guy's, new to this. :confused: :confused: |
There we are then BUMP. no replies to my Q. guy's. Ok no prob. |
Quote:
Open it with notepad and paste in the section beginning with [model name] for each of the models as posted in this thread. These new entries go into the section that contains the ADI-based models, this comes before the TI-based models. Is that clear enough? -- WolfMan |
Quote:
Thanks again. |
Quote:
BL0= Calypso_cmd.bin BL1= Calypso_amd.bin MD= 40 CDS= 00000000 CSI= 00800000 ADS= 01000000 ASI= 00800000 PAT= 00010000 IMS= 800A ULS= 0 ??? Regards |
yes but series TI only read flash |
Hi, How can I edit LG_GSM_En.ini for F2400 ? |
All is Ok, problem solved :) |
All times are GMT +1. The time now is 22:10. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -