@SHA / HWK Team please check here often , because this is a Software Bug List - GSM-Forum

MisterX GSMFREE · 11-15-2005, 20:35

@SHA / HWK Team , please check all Bug which are posted here to improve the UFS + HWK Software .

@All *******rs , please post here the Software Bugs you have found .

Nokia DCTxBB5 V1.4_b:

Problem:
Nokia 3120 the Software couldn't boot the phone , i must boot it manual with pressing Powerbutton . I've tested it with 2 different cables , same problem on both , so I think its a Software Bug

Samsung 1.4_u Beta:

Problems:
Samsung E330 , on many E330 the UFS Software couldn't read Mobile Info , if i've press these button , it shows only an error.
Samsung E330 couldn't unlocked direct , on NSDongle it's no problem to unlock these phone direct.

SonyEricsson KZF 1.8_d:

Problem:
The flash counter didn't work on these Software , it shows me allways zero but i've flashed many new SE phones with the Software.

LG 1.0_a Beta:

Problem:
LG 2050 the Software couldn't unlock these phones , it shows that the phone is unlocked , but the phone isn't unlocked . With Vygis the Unlock works well.

PLEASE CHECK THESE BUGS AND PROBLEMS . SO WE ALL COULD HELP TO IMPROVE THESE VERY GOOD BOX.

MisterX GSMFREE · 11-16-2005, 09:52

Nokia DCTxBB5 1.4_b:

Problem:
Flashing Nokia 6600 didn't work , the flashprocess stoped by erasing from 4th Area of MCU with Error: Erasing Error: 10, at 0x04000000-0x04FFFFFF, 940207, Process Failed.
With older DCTx 1.3k Software worked flashing well and without problems.

NeTRaW · 11-17-2005, 02:14

Old UFS3 isn't 100% compatible with KZF Software!! I hope that Saras will solve this problem asap. We have tested this with a new UFS3 and an old one, both running KZF Software, using HWK of course. There isn't any problem with flashing, but the old one can't unlock the phones (there is an error). Look at the following lines:

McuId: 80000301FFFFFF, CID: 36, 4 (Red)
Baud Rate: 921600
Trying: CXC1326739_R2L{0101030401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L, Ok
IMEI : 356194-00-644301-0, CID: 36, CDT: 1 0 1 (Red)
Fl_Id: 890D, Intel RD38F4050L0YT
OTP_F: 03059601DD42951F - Locked
OTP_U: 1480626F05D04C9D - Locked
BLK_0: 0x44F00000
PRd_Error: 0x44F00000, 584
PRd_Error: 0x44F00000, 559
PRd_Error: 0x44F00000, 615
Security Initialization Failed, Time: 0:14

This is the result with the old one (always the same result). The same phone, with the same cable and hwk module, is working 100%.

@Saras or Odia

If you need some info about that, please mail me at [email protected]

Best Regards,

11-15-2005, 20:35	#1 (permalink)
MisterX GSMFREE No Life Poster Join Date: Aug 2003 Location: Germany , Bavaria Age: 44 Posts: 613 Member: 37125 Status: Offline Thanks Meter: 19	@SHA / HWK Team please check here often , because this is a Software Bug List @SHA / HWK Team , please check all Bug which are posted here to improve the UFS + HWK Software . @All *****rs , please post here the Software Bugs you have found . Nokia DCTxBB5 V1.4_b: Problem: Nokia 3120 the Software couldn't boot the phone , i must boot it manual with pressing Powerbutton . I've tested it with 2 different cables , same problem on both , so I think its a Software Bug Samsung 1.4_u Beta: Problems: Samsung E330 , on many E330 the UFS Software couldn't read Mobile Info , if i've press these button , it shows only an error. Samsung E330 couldn't unlocked direct , on NSDongle it's no problem to unlock these phone direct. SonyEricsson KZF 1.8_d: Problem: The flash counter didn't work on these Software , it shows me allways zero but i've flashed many new SE phones with the Software. LG 1.0_a Beta: Problem: LG 2050 the Software couldn't unlock these phones , it shows that the phone is unlocked , but the phone isn't unlocked . With Vygis the Unlock works well. PLEASE CHECK THESE BUGS AND PROBLEMS . SO WE ALL COULD HELP TO IMPROVE THESE VERY GOOD BOX.** Last edited by MisterX GSMFREE; 11-16-2005 at 10:07.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-16-2005, 09:52	#2 (permalink)
MisterX GSMFREE No Life Poster Join Date: Aug 2003 Location: Germany , Bavaria Age: 44 Posts: 613 Member: 37125 Status: Offline Thanks Meter: 19	Nokia DCTxBB5 1.4_b: Problem: Flashing Nokia 6600 didn't work , the flashprocess stoped by erasing from 4th Area of MCU with Error: Erasing Error: 10, at 0x04000000-0x04FFFFFF, 940207, Process Failed. With older DCTx 1.3k Software worked flashing well and without problems.

11-17-2005, 02:14	#3 (permalink)
NeTRaW No Life Poster Join Date: Oct 2003 Location: South Spain Posts: 521 Member: 42553 Status: Offline Thanks Meter: 23	Old UFS3 isn't 100% compatible with KZF Software!! I hope that Saras will solve this problem asap. We have tested this with a new UFS3 and an old one, both running KZF Software, using HWK of course. There isn't any problem with flashing, but the old one can't unlock the phones (there is an error). Look at the following lines: McuId: 80000301FFFFFF, CID: 36, 4 (Red) Baud Rate: 921600 Trying: CXC1326739_R2L{0101030401}.bin PayLoader Certificate Accepted Prolgue Ok PayLoader: 041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L, Ok IMEI : 356194-00-644301-0, CID: 36, CDT: 1 0 1 (Red) Fl_Id: 890D, Intel RD38F4050L0YT OTP_F: 03059601DD42951F - Locked OTP_U: 1480626F05D04C9D - Locked BLK_0: 0x44F00000 PRd_Error: 0x44F00000, 584 PRd_Error: 0x44F00000, 559 PRd_Error: 0x44F00000, 615 Security Initialization Failed, Time: 0:14 This is the result with the old one (always the same result). The same phone, with the same cable and hwk module, is working 100%. @Saras or Odia If you need some info about that, please mail me at [email protected] Best Regards,