To Solder or not to solder - GSM-Forum

Realistic · 08-07-2005, 19:07

Hey guys, just tried setting up my HWK in my UFS-3 box as in the picture featured in the installation line, however the software did not connect it. I only place it loose on the pins, is it required to solder the pins or could i have a faulty hwk?

Any suggestions or advice would be greatly appreciated.

Regards,

Billy.

daiphil · 08-07-2005, 19:12

Well I just connected mine onto the pins, and it shows up in the software no prob. some say it needs to be soldered and some say no.

UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: *****
HID: 98******002700**
HWK: A1.02-TEST
Licence: True

eblaster101 · 08-07-2005, 20:05

try slightly bending the pins so it creates a tight fit

ManWolf · 08-08-2005, 06:02

Quote:

Originally Posted by Realistic

Hey guys, just tried setting up my HWK in my UFS-3 box as in the picture featured in the installation line, however the software did not connect it. I only place it loose on the pins, is it required to solder the pins or could i have a faulty hwk?

Any suggestions or advice would be greatly appreciated.

Regards,

Billy.

But have you installed UFS suite? The older software won't see the HWK, you need to run the KFZ or SAMs 1.4s version as they reset the HWK and the signon banner appears.

Also, you say loosely placed, you need to push the connector right down on the 16 pin header to ensure contact is made, and to ensure it doesn't short out on the box of the UFS3.

--

WolfMan

Dave.W · 08-30-2005, 14:31

if you are scared to solder a few *very large* pins, i think you are in the wrong line of business mate...

maybe try flower aranging. very safe and NO SOLDERING REQUIRED...

Farzina Manji · 12-08-2005, 13:07

Hi,

I need help my HWK says:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 19039
HWK: Self Destructed
Licence: True
Selected Device, not Compatible with Software

andre128 · 12-09-2005, 09:52

replace with your reseller

djouaka · 05-20-2006, 23:34

Quote:

Originally Posted by Farzina Manji

Hi,

I need help my HWK says:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 19039
HWK: Self Destructed
Licence: True
Selected Device, not Compatible with Software

Good day
Have u repair your HWK
I have the sem pb any help for my
Djouaka
Waiting

GreenCheese · 05-20-2006, 23:42

you should NOT have to solder. That is rediculous. Have reseller replace it.

djouaka · 05-21-2006, 22:29

Quote:

Originally Posted by GreenCheese

you should NOT have to solder. That is rediculous. Have reseller replace it.

Good day Sir

I did not solder it
Now when conet it ask of activetion string,when put i put the activetion
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 0
UFS_USB V2.6 (c) SarasSoft 2005.S/n: 40149
Licence: False
Licence Update Failed
Any help
Waiting
Djouaka

08-07-2005, 19:07	#1 (permalink)
Realistic Freak Poster Join Date: Dec 2004 Age: 40 Posts: 112 Member: 99524 Status: Offline Thanks Meter: 0	To Solder or not to solder Hey guys, just tried setting up my HWK in my UFS-3 box as in the picture featured in the installation line, however the software did not connect it. I only place it loose on the pins, is it required to solder the pins or could i have a faulty hwk? Any suggestions or advice would be greatly appreciated. Regards, Billy.

08-07-2005, 19:12	#2 (permalink)
daiphil Freak Poster Join Date: Mar 2004 Location: Green,Green grass of home. Posts: 384 Member: 56899 Status: Offline Thanks Meter: 3	solder. Well I just connected mine onto the pins, and it shows up in the software no prob. some say it needs to be soldered and some say no. UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 UFS_USB V2.6 (c) SarasSoft 2005. S/n: *** HID: 98**002700 HWK: A1.02-TEST Licence: True

12-08-2005, 13:07	#6 (permalink)
Farzina Manji Insane Poster Join Date: Oct 2003 Location: East Africa,Tanzania,Mwanza Age: 55 Posts: 63 Member: 40578 Status: Offline Thanks Meter: 0	Hwk Hi, I need help my HWK says: UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 UFS_USB V2.6 (c) SarasSoft 2005. S/n: 19039 HWK: Self Destructed Licence: True Selected Device, not Compatible with Software

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
do you want to pay or not to use next update!!!!!! plz vote	amralkareem	Infinity-Box	107	10-08-2008 17:36
To Flash or not to flash ?? My GX10i	Cools	Sharp	0	03-26-2005 17:35
to buy or not to buy ...	distefano	VygisToolbox	10	03-16-2005 08:32
To ME45i or not to?	SuperDAF	x1x to x45/x50	1	04-07-2004 17:43

08-07-2005, 20:05	#3 (permalink)
eblaster101 Freak Poster Join Date: Apr 2005 Age: 42 Posts: 312 Member: 136598 Status: Offline Thanks Meter: 3	try slightly bending the pins so it creates a tight fit

08-30-2005, 14:31	#5 (permalink)
Dave.W No Life Poster Join Date: Nov 2001 Location: England Age: 41 Posts: 2,821 Member: 7653 Status: Offline Thanks Meter: 823	if you are scared to solder a few very large pins, i think you are in the wrong line of business mate... maybe try flower aranging. very safe and NO SOLDERING REQUIRED...

12-09-2005, 09:52	#7 (permalink)
andre128 No Life Poster Join Date: Aug 2005 Location: MY Posts: 2,369 Member: 172261 Status: Offline Thanks Meter: 364	replace with your reseller

05-20-2006, 23:42	#9 (permalink)
GreenCheese No Life Poster Join Date: Jan 2006 Location: Rock'n in the Free-World Age: 53 Posts: 686 Member: 226496 Status: Offline Thanks Meter: 11	you should NOT have to solder. That is rediculous. Have reseller replace it.