03.06.06 - SagemDD V4.1 & V4.2 was released

[Oxo_Boxo]

About SagemDD V4.1 features:

Version 4.1 of SagemDD was developed for discovering "Bootloader failed" error causative by "too long TP wires".
When you use V4.1 and get "PROBLEM:Bad log! Is your box cable shortened?" message from server,
this indicates that total cables lengths are too long and must be shortened.
If phone (Hash Table) are supported stand alone, same error message - "PROBLEM:Bad log! Is your box cable shortened?"
will appear directly from SagemDD software!

Simple solution is:

Total length of the cable between RJ45 (box) and RJ45 (TP adapter) must be less than 30cm.
We recommend you cable shortening to the limit on box side.

What to do:

Open connection-block and write down position and color of each wire coming from box and joined to connection-PCB.
Now cut the cable to total length no more then 10cm. and solder back wires to connection-PCB using position and color from notes.


We will report cables manufactures to do this changes in production stage yet!





SagemJtagUnlocker Team

5.06.06

SagemDD_V4.2 released.
Fixed bug about cable diagnostic for some M62+ phones!