03.06.06 - SagemDD V4.1 & V4.2 was released - GSM-Forum

Oxo_Boxo · 06-03-2006, 12:25

About SagemDD V4.1 features:

Version 4.1 of SagemDD was developed for discovering "Bootloader failed" error causative by "too long TP wires".
When you use V4.1 and get "PROBLEM:Bad log! Is your box cable shortened?" message from server,
this indicates that total cables lengths are too long and must be shortened.
If phone (Hash Table) are supported stand alone, same error message - "PROBLEM:Bad log! Is your box cable shortened?"
will appear directly from SagemDD software!

Simple solution is:

Total length of the cable between RJ45 (box) and RJ45 (TP adapter) must be less than 30cm.
We recommend you cable shortening to the limit on box side.

What to do:

Open connection-block and write down position and color of each wire coming from box and joined to connection-PCB.
Now cut the cable to total length no more then 10cm. and solder back wires to connection-PCB using position and color from notes.

We will report cables manufactures to do this changes in production stage yet!

SagemJtagUnlocker Team

5.06.06

SagemDD_V4.2 released.
Fixed bug about cable diagnostic for some M62+ phones!

sam unlocker · 06-03-2006, 12:36

thanks for this informarion and new update to

Amir-SkillZ · 06-03-2006, 12:49

SO for those Who were using Direct cables on TP location mUst have the Cable only 30cm or 10cm..from JIG to TP location

NadeemShahzad · 06-03-2006, 13:06

Thanks SagemJtagUnlocker Team For This Update.

dynamic-gsm · 06-03-2006, 13:26

Important information..we need it !

Good work and update too , thx SagemJiatgUnlocker Team

br dynamic .

Stryker · 06-03-2006, 14:32

Good info, thanks for update!

rajabrotherscom · 06-03-2006, 14:56

a.o.a and hi to all

nice update and thanx for info about some problem.

br raja

snipergsm · 06-03-2006, 14:58

thanks for new update

SagemJtagUnlocker Team

**.::Gsmdenis::.** · 06-03-2006, 14:59

hmm, let's test the new ver 4.1 , hope working fine !

BR.,

Denis

hafiz · 06-03-2006, 15:07

hi
thanks for new update
with helpfull guideline
br
hafiz

Afzaal · 06-03-2006, 15:24

Quote:

Originally Posted by Oxo_Boxo

About SagemDD V4.1 features:

Version 4.1 of SagemDD was developed for discovering "Bootloader failed" error causative by "too long TP wires".
When you use V4.1 and get "PROBLEM:Bad log! Is your box cable shortened?" message from server,
this indicates that total cables lengths are too long and must be shortened.
If phone (Hash Table) are supported stand alone, same error message - "PROBLEM:Bad log! Is your box cable shortened?"
will appear directly from SagemDD software!

Simple solution is:

Total length of the cable between RJ45 (box) and RJ45 (TP adapter) must be less than 30cm.
We recommend you cable shortening to the limit on box side.

What to do:

Open connection-block and write down position and color of each wire coming from box and joined to connection-PCB.
Now cut the cable to total length no more then 10cm. and solder back wires to connection-PCB using position and color from notes.

We will report cables manufactures to do this changes in production stage yet!

SagemJtagUnlocker Team

thanks nice Move.
But dear We Get Standard cables with Box when we Purchase SagDD.
So why it Show Such error.
or u r talkin about repaired Cable ?
BR.

Afzaal · 06-03-2006, 15:31

Quote:

Originally Posted by Amir-SkillZ

SO for those Who were using Direct cables on TP location mUst have the Cable only 30cm or 10cm..from JIG to TP location

No man
From Box Female RJ45 to Jig or TP Adopter Female RJ45 Cable Must be 10 cm to less then 30Cm not more then that.
BR.

latigido · 06-03-2006, 16:02

Quote:

Originally posted by Afzaal
thanks nice Move.
But dear We Get Standard cables with Box when we Purchase SagDD.
So why it Show Such error.
or u r talkin about repaired Cable ?

Less than 5% of customers get this error/message with some Sagem phones.
See our old recommendations about cables (www.sagdd.net) and compare with your so called "standard" cable.

*phone-company* · 06-03-2006, 17:41

never had any problem with that....i use original cable.........

But once again....very good support

best regards

Kashif Khan · 06-03-2006, 18:00

Thanx for your nice update.
BR
Kashif Khan

06-03-2006, 12:25	#1 (permalink)
Oxo_Boxo No Life Poster Join Date: Jun 2002 Location: East Europe Age: 51 Posts: 3,950 Member: 12837 Status: Offline Thanks Meter: 2,740	03.06.06 - SagemDD V4.1 & V4.2 was released About SagemDD V4.1 features: Version 4.1 of SagemDD was developed for discovering "Bootloader failed" error causative by "*too long TP wires". When you use V4.1 and get "PROBLEM:Bad log! Is your box cable shortened?"* message from server, this indicates that total cables lengths are too long and must be shortened. If phone (Hash Table) are supported stand alone, same error message - "PROBLEM:Bad log! Is your box cable shortened?" will appear directly from SagemDD software! Simple solution is: Total length of the cable between RJ45 (box) and RJ45 (TP adapter) must be less than 30cm. We recommend you cable shortening to the limit on box side. What to do: Open connection-block and write down position and color of each wire coming from box and joined to connection-PCB. Now cut the cable to total length no more then 10cm. and solder back wires to connection-PCB using position and color from notes. We will report cables manufactures to do this changes in production stage yet! SagemJtagUnlocker Team 5.06.06 SagemDD_V4.2 released. Fixed bug about cable diagnostic for some M62+ phones! Last edited by latigido; 06-06-2006 at 07:28.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sagemdd v4.2 was released	sabeurtoufik	SAGEM JTAG UNLOCKER	0	06-10-2006 11:51
SagemDD V4.2 was released	NadeemShahzad	SAGEM JTAG UNLOCKER	3	06-07-2006 02:58
UN LOCK NOKIA 3330 v4.30 & v4.50 without downgrading "2"	majid	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	12-18-2001 22:26
UN LOCK NOKIA 3330 v4.30 & v4.50 without downgrading	Mehvishal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	12-16-2001 23:23
Looking for unlocking flash for 3330 v4.30 & v4.18	enric666	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	09-01-2001 03:34

06-03-2006, 12:36	#2 (permalink)
sam unlocker No Life Poster Join Date: Aug 2002 Location: N400 Age: 54 Posts: 549 Member: 14632 Status: Offline Thanks Meter: 32	thanks for this informarion and new update to

06-03-2006, 12:49	#3 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	SO for those Who were using Direct cables on TP location mUst have the Cable only 30cm or 10cm..from JIG to TP location

06-03-2006, 13:06	#4 (permalink)
NadeemShahzad Cheater -Don't Deal with him- Join Date: Mar 2005 Age: 39 Posts: 4,223 Member: 132334 Status: Offline Sonork: 100.87489 Thanks Meter: 1,193	Thanks SagemJtagUnlocker Team For This Update.

06-03-2006, 13:26	#5 (permalink)
dynamic-gsm No Life Poster Join Date: Jul 2005 Location: In Original_Space Age: 42 Posts: 561 Member: 166385 Status: Offline Thanks Meter: 282	Important information..we need it ! Good work and update too , thx SagemJiatgUnlocker Team br dynamic .

06-03-2006, 14:32	#6 (permalink)
Stryker Freak Poster Join Date: Jun 2000 Location: In front of pc Posts: 308 Member: 1585 Status: Offline Thanks Meter: 15	Good info, thanks for update!

06-03-2006, 14:56	#7 (permalink)
rajabrotherscom No Life Poster Join Date: Jun 2005 Location: rajabrothers communications Age: 43 Posts: 1,711 Member: 155773 Status: Offline Sonork: 1606514 Thanks Meter: 87	a.o.a and hi to all nice update and thanx for info about some problem. br raja

06-03-2006, 14:58	#8 (permalink)
snipergsm Registered User Join Date: Jun 2004 Age: 46 Posts: 715 Member: 68983 Status: Offline Thanks Meter: 55	thanks for new update SagemJtagUnlocker Team

06-03-2006, 14:59	#9 (permalink)
.::Gsmdenis::. Product Manager Join Date: Aug 2002 Location: MFC Posts: 8,297 Member: 79315 Status: Offline Thanks Meter: 6,024	hmm, let's test the new ver 4.1 , hope working fine ! BR., Denis

06-03-2006, 15:07	#10 (permalink)
hafiz No Life Poster Join Date: Aug 2004 Location: Voda & 3 UK DIRECT Source Posts: 656 Member: 78936 Status: Offline Sonork: 100.1575790 Thanks Meter: 426	hi thanks for new update with helpfull guideline br hafiz

06-03-2006, 17:41	#14 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	never had any problem with that....i use original cable......... But once again....very good support best regards

06-03-2006, 18:00	#15 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Holland China Brazil Age: 43 Posts: 3,815 Member: 88016 Status: Offline Thanks Meter: 320	Thanx for your nice update. BR Kashif Khan