Sagem Myx1-2 trio after unlock no incomig and outgoing calls. - GSM-Forum

rajumobile · 04-02-2006, 14:31

Sagem Myx1-2 trio after unlock with sagem dd original, no incomig and outgoing calls.
When phone switch off and on again at that time only once incoming call
receives without ringing only for few seconds and then stops incoming and outgoing calls.
What is solution ?
Please help.
regards.

Oxo_Boxo · 04-02-2006, 15:41

Check/change battery!

rajumobile · 04-02-2006, 17:58

Phone doesnt switch off at its own, as incoming call receives, on display "incoming call" shows for @ 5 seconds and then shows 1 missed call. Phone stays ON and then somebody try to call he receives "not reachable" message eventhough phone is ON and full tower strength and battery fully charged. Its brand new phone. And tried to call it beeps twice but couldnt connect and back to main display.
thanks.

sallupat · 04-04-2006, 16:06

plz read the flash of that phone & send it to [email protected] urgently. i had also suffered with the same problem

mobilextreme · 04-04-2006, 17:19

LOL... if its a brand new phone, why not just return it to shop and get another and try again.

br,
Danny.

sallupat · 04-05-2006, 03:05

Quote:

Originally Posted by mobilextreme

LOL... if its a brand new phone, why not just return it to shop and get another and try again.

br,
Danny.

sagdd is used to unlock. the sim card given with handset works fine but after unlocking there is no outgoingcalls & after unlocking the warrenty expires so we had to find the solution

rajumobile · 04-06-2006, 05:15

Problem solved by playing with Display setting-annomys.
Thanks for help
@sallupat thanks.

Oxo_Boxo · 04-06-2006, 08:49

@rajumobile

This situation is discussed too many time here.....
BE sure: unlocking via SagDD is 100% safetly!

BR

vrepair · 04-30-2006, 17:42

i had around 100 pcs of sagem myx1-2 twin ..unlocked successfully but all phones have no network..the imei starts with010585006796492...i think they are 850mhz phones...how can i convert to make it work on gsm band. that is 900mhz ..

plz reply a soon as possb

04-02-2006, 14:31	#1 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 53 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	Sagem Myx1-2 trio after unlock no incomig and outgoing calls. Sagem Myx1-2 trio after unlock with sagem dd original, no incomig and outgoing calls. When phone switch off and on again at that time only once incoming call receives without ringing only for few seconds and then stops incoming and outgoing calls. What is solution ? Please help. regards.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
want sagem myx1-2 trio phone code..	keerthisreenu	Sagem Hardware Repair Area	0	02-09-2008 13:04
Sagem Myx1-2 trio after unlock no incomig and outgoing calls.	rajumobile	ARM9 BASED M62 / M62+	1	04-03-2006 07:05
Unlock code Sagem MyX1-2 TRIO	joemedi	SagMaster Team OLD Products	0	12-15-2005 14:15

04-02-2006, 15:41	#2 (permalink)
Oxo_Boxo No Life Poster Join Date: Jun 2002 Location: East Europe Age: 51 Posts: 3,950 Member: 12837 Status: Offline Thanks Meter: 2,740	Check/change battery!

04-02-2006, 17:58	#3 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 53 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	Phone doesnt switch off at its own, as incoming call receives, on display "incoming call" shows for @ 5 seconds and then shows 1 missed call. Phone stays ON and then somebody try to call he receives "not reachable" message eventhough phone is ON and full tower strength and battery fully charged. Its brand new phone. And tried to call it beeps twice but couldnt connect and back to main display. thanks.

04-04-2006, 16:06	#4 (permalink)
sallupat No Life Poster Join Date: Apr 2005 Age: 46 Posts: 911 Member: 138982 Status: Offline Thanks Meter: 138	plz read the flash of that phone & send it to [email protected] urgently. i had also suffered with the same problem

04-04-2006, 17:19	#5 (permalink)
mobilextreme No Life Poster Join Date: Nov 2004 Location: In a Ganja plant! Age: 38 Posts: 1,050 Member: 91298 Status: Offline Thanks Meter: 6	LOL... if its a brand new phone, why not just return it to shop and get another and try again. br, Danny.

04-06-2006, 05:15	#7 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 53 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	Problem solved by playing with Display setting-annomys. Thanks for help @sallupat thanks.

04-06-2006, 08:49	#8 (permalink)
Oxo_Boxo No Life Poster Join Date: Jun 2002 Location: East Europe Age: 51 Posts: 3,950 Member: 12837 Status: Offline Thanks Meter: 2,740	@rajumobile This situation is discussed too many time here..... BE sure: unlocking via SagDD is 100% safetly! BR

04-30-2006, 17:42	#9 (permalink)
vrepair No Life Poster Join Date: Dec 2003 Location: in the center of the heart Posts: 963 Member: 46125 Status: Offline Thanks Meter: 59	i had around 100 pcs of sagem myx1-2 twin ..unlocked successfully but all phones have no network..the imei starts with010585006796492...i think they are 850mhz phones...how can i convert to make it work on gsm band. that is 900mhz .. plz reply a soon as possb