Free Alcatel Total Service 5.0 by All-Katel

[bRAd]

i revive it by this way:

run s2gsm cracked, click relock phone and then change imei to same number, then unlock phone.. after this procedure "my" phone is ok..

bRAd

[blaiseid]

Originally Posted by 936mw

BH4 102KM278 Totally blocked

--------------------------------------------------------------------------------

I ´m try unlocking Alcatel 735 v102KM278 with this program, and now
phone is totally blocked to network : Phone blocked - contacting operator.
Version is supported in program help.

Before unlock i make backup eeprom ant teh zone.
After reload backup to phone - still blocked.

Any solution???

Thanks

Dont worry.

Do this:

Write back your 2mb backup. the software will show you writting % and will go beyond 100% dont worry. when fully written back, will say phone unlocked. Your phone is not unlocked.Press disconnect.Press power button, phone is on and locked.Reconnect your phone, entre your serial number and click connect.Press Unlock.you must see progress bar erasing 2% writting1 writting2 wait till the programme finishes the work. If you see Unlocking stays for more than 3 minutes, then your phone is off, you must rewrite it again with you first back up.

Hope this will help you.

Salam

[MayCry]

Thanks work all fine

[selfone69]

Originally Posted by hard

Hi !

You need file TABCTL32.OCX .Copy to same directory ATS50_Crack_Ver.exe
Run program no problem in W98 WMe WXP

Best Regards
hard

Hey!!!! Look at what i got ( see the attached ) when it's on Win Me.
I have download TABCTL32.OCX and manually registed it,


but now this error message again
I even download a new dll file - MSVBVM60.DLL AND instaled visual basic 5
It still says the same Bloody things - I am frustrated...
Has anyone here actually tested on Win Me ? please write your feedback!!!!!!!!!!!!!!!!!!!!!!!!

[selfone69]

Originally Posted by TRABEL

trying to use this software with the cable i builed with the pinout diag on the net.

program keep stay on conecting..... but phone not found.
should phone be on/off with/without battary ?

With battery/ but power off. hope this helps.

[selfone69]

Originally Posted by blaiseid

Dont worry.

Do this:

Write back your 2mb backup. the software will show you writting % and will go beyond 100% dont worry. when fully written back, will say phone unlocked. Your phone is not unlocked.Press disconnect.Press power button, phone is on and locked.Reconnect your phone, entre your serial number and click connect.Press Unlock.you must see progress bar erasing 2% writting1 writting2 wait till the programme finishes the work. If you see Unlocking stays for more than 3 minutes, then your phone is off, you must rewrite it again with you first back up.

Hope this will help you.

Salam

Hey! thanks for being so helpful Salam!!!
I have followed your instruction because I had exactly the same problem with a 102km278. After wrote backup flash files ( 2Mb) and eep ( 384KB ) and TEH ( 8 kb ) my Phone was dead I have tried 7 times. So, that rule out the possibility of human error. The only thing I can think of is that, these three backup files - which I didn't use auto backup ( by tick the box - Save Backup ) How I did is manually - click on read flash ( got the 2Mb flash ) read eeprom ( got the 384KB eep ) read TEH got the 8kb TEH. Is that correct file size / method to backup? and any file I missed out?
Now restore - I just click on write, write and write, everything went seems normal. Oh, only one thing I was not sure is that when I click on write TEH - it prompted says : " select file with IMEI PHONE" as I opened the folder there were about 10 files in there, which one to choose? they all have a similar name ( like 35161900076XXXX__1;15;2_TEH.bck, and 35161900076XXXX__1;22;43_TEH.bck) BUT only one is different ( 102KM278_teh.bck ) which was saved at outside of the folder somehow. I have almost tried them all one by one, see which one will work, but no luck. ( do I have to write them all ? )

This is my first time play around with ATS_v50_Crack, Probably I've missed something. I 'd very much appreciate if you can help

[Bangruppa Swami]

Namste Swamis i need fresh link for it please help us .
Dhanewad

[strangerboy]

ahahahahahahhahhahahahahha yeah kiling clients phones is very nice.... like hammer in your head

[bakry]

the link dont work
bakry...

[OvidelGSM]

the link is broken man!!!

[afser]

any body help me be4 flash file

siga [email protected]

[KUBAT1]

I used this software for BH4 V102 Km183500, but After UNLOCKING the phone started to just blinking and not TURN ON. Bless G O D, I have full backup from henrisu 5.23 and uploaded now still with lock.

Now If this software is not working is there any way to unlock?
Regards..

FOR ALCATELS FIRST EVERYTIME MAKE A FULL BACKUP!!!!

[iancumdn]

give me pls the adress of this software cause non of it's good.