******* Free For All Solution For Bg3 Phones ******* - Page 2 - GSM-Forum

comunicatel · 04-18-2003, 14:32

To all fo flash backup use wray's free soft U can'see version but u can backup all 4mb space of the flash so to avoid mistekes and killed phones use this

Magic2ik · 04-18-2003, 21:33

is there a way to fixe killed phone ???

mobileland · 04-18-2003, 23:13

Anybody tried this!Thanks for the solution anyway.

comunicatel · 04-19-2003, 08:44

Magic2ik

yes U can fix killed fone first read fullflash with wray's tool
teh zone is at the same place as at bf4 3f8000- save this as teh write fullflash and rewrite teh using HenrichSGU's soft at this addres.
I think that it is also possible to downgrade to bf4 but I am not sure and did not tested this

balivo · 04-19-2003, 13:12

New Partial for Alcatel 526.....

http://balivo.com/files/526_110KN129_260000.zip

Ver. 110KN129

Enjoy!!!

Bogi · 04-19-2003, 15:27

Hi,Balivo.First thanks for your solution.I have here one 525 ver.110-KL184.Can you help me to unlock it?

balivo · 04-19-2003, 22:38

When I have one 526 110-KL184 .... I will help you....

sorry for now... nothing...

Best Regards!!!

Bogi · 04-20-2003, 07:54

Hi,Balivo.Phone is here on my table.I tried to read flash with BG3 flash reader 1.01,but always get many errors.Can you tell me other safe way to read flash from phone?

balivo · 04-20-2003, 10:30

First of all chek your cable....

Try to read/write with Wray Tool or be much better with new BG3 Unlocker from my site....

Some phones have unsupported flash IC.....

Best Regards!!!

Pk2GSM · 04-20-2003, 15:06

Hi all.

First of all I have to say that there´s no bg3 phone that cannot be readed or unlocked with BF tool by Henrich.

Up today, bg3 with new flash ic, is so good readed by henrich as the first pieces, and the partial unlock solution works in all type of bg3 phone and version.

And I want to say a little thing more:

- Henrich soft is the only one that can unlock with partial method new alcatel 526 110-KN129002 (maked and tested by me) in 5 seconds, cause all dongled soft like Wray, Magician, Zulea, Vigys etc... not recognice this kind of flash, and all are programmed to write from 140000 to 150000 zone, new flash goes from 260000 to 27000.

So the only solution up today for unlock this new models is with Henrich, writing the block in 5 seconds, or with expensive soft patching the flash and writing full flash again. ( not recomended ).

This is the true for all people who think that is better a dongle than a free and easy solution like Henrich.

Best Regards!!

Pk2GSM.

balivo · 04-20-2003, 15:56

@Pk2GSM

Yes, Henrich soft is very usefull but NOT support <write> function on the new Micron b2c2 type flash IC (BF4&BG3).... or I´m wrong???

Best regards!!!

P.S.
I has kill one BF4 new Micron.... with Henrich 2.2 -> Read: OK, Erase: OK, Write: NOT WORK.

Bogi · 04-20-2003, 21:45

Hi Balivo.I think that my phone has a new type Thompson flash.No one soft want to read it correct.I use same cable as for BF3/4 phones,only connector changed with for BG3 one.

masterross · 04-20-2003, 21:46

try ******'s soft

cosmo · 04-21-2003, 07:33

@Bogi...check first if u have 3,3..3,6 on interface. New 512 and 525 not work with 5v inside like 311/310 and some 511. Than use my reader cose that read New ST and New Micron.
http://bekosbrothers.com/free/bfx&bg3_cable.zip
@Pk2GSM..I was put another link here ..chech it..it reads 4M.

cosmo · 04-21-2003, 07:38

@Bogi
After u will read flash..send me a mail..i will help u to unlock it!

regardes

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
NEC CRASSY 5 :The definitive and free NEC 3G solution for all	Millo_6	NEC	215	03-22-2016 17:38
Free Flash Philips For all Solutions	aliwali	Philips	15	11-05-2005 12:19
For all who interested BG3 dead after display	stanimir_13	VygisToolbox	0	07-27-2005 13:38
Proffesional Software/Solutions for all kind of Mobile Phones	rrakip	Main Sales Section	0	01-31-2003 11:30

04-18-2003, 14:32	#16 (permalink)
comunicatel Freak Poster Join Date: Mar 2002 Posts: 474 Member: 10201 Status: Offline Thanks Meter: 0	To all fo flash backup use wray's free soft U can'see version but u can backup all 4mb space of the flash so to avoid mistekes and killed phones use this

04-18-2003, 21:33	#17 (permalink)
Magic2ik No Life Poster Join Date: Jul 2000 Location: The Netherlands Age: 43 Posts: 725 Member: 1688 Status: Offline Thanks Meter: 1	is there a way to fixe killed phone ???

04-18-2003, 23:13	#18 (permalink)
mobileland No Life Poster Join Date: Feb 2003 Location: www.X-SIM.me Age: 45 Posts: 2,424 Member: 22955 Status: Offline Sonork: 67574 - Not use it Thanks Meter: 584	Anybody tried this!Thanks for the solution anyway.

04-19-2003, 08:44	#19 (permalink)
comunicatel Freak Poster Join Date: Mar 2002 Posts: 474 Member: 10201 Status: Offline Thanks Meter: 0	Magic2ik yes U can fix killed fone first read fullflash with wray's tool teh zone is at the same place as at bf4 3f8000- save this as teh write fullflash and rewrite teh using HenrichSGU's soft at this addres. I think that it is also possible to downgrade to bf4 but I am not sure and did not tested this

04-19-2003, 13:12	#20 (permalink)
balivo No Life Poster Join Date: Mar 2001 Location: USA Age: 55 Posts: 504 Member: 3788 Status: Offline Thanks Meter: 4	New Partial for Alcatel 526..... http://balivo.com/files/526_110KN129_260000.zip Ver. 110KN129 Enjoy!!!

04-19-2003, 15:27	#21 (permalink)
Bogi No Life Poster Join Date: Jul 2001 Location: Bulgaria Age: 53 Posts: 957 Member: 5579 Status: Offline Thanks Meter: 5	Hi,Balivo.First thanks for your solution.I have here one 525 ver.110-KL184.Can you help me to unlock it?

04-19-2003, 22:38	#22 (permalink)
balivo No Life Poster Join Date: Mar 2001 Location: USA Age: 55 Posts: 504 Member: 3788 Status: Offline Thanks Meter: 4	When I have one 526 110-KL184 .... I will help you.... sorry for now... nothing... Best Regards!!!

04-20-2003, 07:54	#23 (permalink)
Bogi No Life Poster Join Date: Jul 2001 Location: Bulgaria Age: 53 Posts: 957 Member: 5579 Status: Offline Thanks Meter: 5	Hi,Balivo.Phone is here on my table.I tried to read flash with BG3 flash reader 1.01,but always get many errors.Can you tell me other safe way to read flash from phone?

04-20-2003, 10:30	#24 (permalink)
balivo No Life Poster Join Date: Mar 2001 Location: USA Age: 55 Posts: 504 Member: 3788 Status: Offline Thanks Meter: 4	First of all chek your cable.... Try to read/write with Wray Tool or be much better with new BG3 Unlocker from my site.... Some phones have unsupported flash IC..... Best Regards!!!

04-20-2003, 15:06	#25 (permalink)
Pk2GSM Crazy Poster Join Date: May 2002 Location: Spain Posts: 50 Member: 11983 Status: Offline Thanks Meter: 0	Hi all. First of all I have to say that there´s no bg3 phone that cannot be readed or unlocked with BF tool by Henrich. Up today, bg3 with new flash ic, is so good readed by henrich as the first pieces, and the partial unlock solution works in all type of bg3 phone and version. And I want to say a little thing more: - Henrich soft is the only one that can unlock with partial method new alcatel 526 110-KN129002 (maked and tested by me) in 5 seconds, cause all dongled soft like Wray, Magician, Zulea, Vigys etc... not recognice this kind of flash, and all are programmed to write from 140000 to 150000 zone, new flash goes from 260000 to 27000. So the only solution up today for unlock this new models is with Henrich, writing the block in 5 seconds, or with expensive soft patching the flash and writing full flash again. ( not recomended ). This is the true for all people who think that is better a dongle than a free and easy solution like Henrich. Best Regards!! Pk2GSM.

04-20-2003, 15:56	#26 (permalink)
balivo No Life Poster Join Date: Mar 2001 Location: USA Age: 55 Posts: 504 Member: 3788 Status: Offline Thanks Meter: 4	@Pk2GSM Yes, Henrich soft is very usefull but NOT support <write> function on the new Micron b2c2 type flash IC (BF4&BG3).... or I´m wrong??? Best regards!!! P.S. I has kill one BF4 new Micron.... with Henrich 2.2 -> Read: OK, Erase: OK, Write: NOT WORK.

04-20-2003, 21:45	#27 (permalink)
Bogi No Life Poster Join Date: Jul 2001 Location: Bulgaria Age: 53 Posts: 957 Member: 5579 Status: Offline Thanks Meter: 5	Hi Balivo.I think that my phone has a new type Thompson flash.No one soft want to read it correct.I use same cable as for BF3/4 phones,only connector changed with for BG3 one.

04-20-2003, 21:46	#28 (permalink)
masterross No Life Poster Join Date: Mar 2001 Location: Earth Posts: 919 Member: 3506 Status: Offline Thanks Meter: 6	try ******'s soft

04-21-2003, 07:33	#29 (permalink)
cosmo Freak Poster Join Date: Feb 2001 Location: Cj,Ro,Eu Posts: 445 Member: 3262 Status: Offline Thanks Meter: 1	@Bogi...check first if u have 3,3..3,6 on interface. New 512 and 525 not work with 5v inside like 311/310 and some 511. Than use my reader cose that read New ST and New Micron. http://bekosbrothers.com/free/bfx&bg3_cable.zip @Pk2GSM..I was put another link here ..chech it..it reads 4M.

04-21-2003, 07:38	#30 (permalink)
cosmo Freak Poster Join Date: Feb 2001 Location: Cj,Ro,Eu Posts: 445 Member: 3262 Status: Offline Thanks Meter: 1	@Bogi After u will read flash..send me a mail..i will help u to unlock it! regardes