ALCATEL 4030D firmware

[khan_302]

Hello brother we have alcatel one touch 4030d

problam hange on one touch we flash it on normal flash file which is easy avalibal .................but after flash set is dead


we need tested ok flash file or scater file etc..........


Thanks in advance

[Brka]

Originally Posted by khan_302

Hello brother we have alcatel one touch 4030d

problam hange on one touch we flash it on normal flash file which is easy avalibal .................but after flash set is dead


we need tested ok flash file or scater file etc..........


Thanks in advance

Russian de-odexed / bloatware removed stock ROM - download HERE

SPFlashTools - download HERE

unpack rom file into some folder, download attached scatter file,
and put into that folder, start spflashtools, open downloaded scatter file,
select manually not ticked files :
- nvram (nvram.bin)
- custpack (custpack2.img)
- EBR3 (EBR3)

and press download, ignore errors, put battery to phone,
insert usb cable, and wait process to finish.

if all ok with phone hardware, you should have phone that start.


post results, and use thanks button if this helped.

b.r.
Alex

[khan_302]

bro i flash on this version but problam ........................... plzzz help me

[Brka]

Originally Posted by khan_302

bro i flash on this version but problam ........................... plzzz help me

FIRST - did you read what I wrote ? Select all files I wrote in above post.
If still the same ... try on another PC, if same .... then it's 99% hardware problem.

Open phone, check if eMMC flash/ram combo is not glued, and if not - reflow it with hot air + flux.

Check if phone works afterwards. If not - retry flashing operation.

if all the same - eMMC dead, need to be replaced.

b.r.
Alex

[aleshek]

@Brka

Hi, last time you helped very much with another one (ot-7041D-2BALCZ1_original_fw_SUGAR_by_bRkA).

Pls can you help once more with this one OT_4030D? I can't flash it because of S_DA_DRAM_NOT_SUPPORT (3004) error. All steps from your tutorial are fulfil, but get this error on SPT flashtool 3.xx or 5.xx, i tried most of SPT verison with the same error.

Alcatel i got with logo hangup, for the first flashing was succesfull, but can't start at all now (nor to the logo), now can i format only it.

Thank you very much for your help,
BR, ALes

[Brka]

Originally Posted by aleshek

@Brka

Hi, last time you helped very much with another one (ot-7041D-2BALCZ1_original_fw_SUGAR_by_bRkA).

Pls can you help once more with this one OT_4030D? I can't flash it because of S_DA_DRAM_NOT_SUPPORT (3004) error. All steps from your tutorial are fulfil, but get this error on SPT flashtool 3.xx or 5.xx, i tried most of SPT verison with the same error.

Alcatel i got with logo hangup, for the first flashing was succesfull, but can't start at all now (nor to the logo), now can i format only it.

Thank you very much for your help,
BR, ALes

I would recommend you to try with editing pro_info file,
just change PID and write to phone, then use OTU updater.

You have all needed files in THIS package I uploaded,
pro_info, boot images, even cwm and twrp recoveries.

You can also try with THIS spflashtool.

If you still encounter problems, either you have drivers issue,
or windows issue (can happen sometimes),
or ... phone have some hardware problem.

b.r.
Alex

[aleshek]

If i tried oficial Alcatel upgrade tool (for 4030D), it says "You select a wrong model name, try again...". Is it possible change or repair model descriptor?

Thank you very much for help again :-)

Ales

[Brka]

Originally Posted by aleshek

If i tried oficial Alcatel upgrade tool (for 4030D), it says "You select a wrong model name, try again...". Is it possible change or repair model descriptor?

Thank you very much for help again :-)

Ales

Method #1 :

You can flash THIS pro_info, from 4030x,
just change pid to any you like.



METHOD #2

Use attached scatter file, Read NVRAM first with SPFT.
Tab READ MEMORY, start address : 0x1460000 , length : 0x500000,
select file name (nvram.bin), select save location, press read and connect phone.

After, use FULL format from SPFT.

Then - Use testpoint, connect red marked point to ground,
connect phone to usb cable (I think can be flashed without battery),
flash preloader and dsp_bl, after that flash normally, without testpoint.
(TP image attached)


dram errors can come from incompatible preloader.bin and dsp_bl.

pro_info file - you can use some from sticky thread.

try and post results.

b.r.
Alex

[ala-din]

and also i have done

Here








BR,

Aladdin

[jeansosgsm]

Originally Posted by Brka

Method #1 :

You can flash THIS pro_info, from 4030x,
just change pid to any you like.



METHOD #2

Use attached scatter file, Read NVRAM first with SPFT.
Tab READ MEMORY, start address : 0x1460000 , length : 0x500000,
select file name (nvram.bin), select save location, press read and connect phone.

After, use FULL format from SPFT.

Then - Use testpoint, connect red marked point to ground,
connect phone to usb cable (I think can be flashed without battery),
flash preloader and dsp_bl, after that flash normally, without testpoint.
(TP image attached)


dram errors can come from incompatible preloader.bin and dsp_bl.

pro_info file - you can use some from sticky thread.

try and post results.

b.r.
Alex

I read your post for same model 4030D, flash full russian firmware from your link above, phone give error on sp flash tool 3005, DRAM unknown, try method with tespoint,won't flash anything, give me same error 3005.
phone is fully bricked or is a another methot ( i don't have any gsm box ) only spflash tool.
Please help!

[mohammed imran]

plz anybody have alcatel one touch 4030d firmware......plz send...


OT-4030D_Russian_FULL_reupload_by_bRkA i flash this firmware my phone dead...........

[ssdjaggi]

After 1 year i recover my alcatel 4030d with the help of you people. . Now my phone is working better then before more free ram with no lag thanks a lot.

[learnersoul]

Model OT 4030d
Problem Dead By Wrong Flash

Need official or custom rom For Sp Flash Tool.

Thanks

[janalam143]

Originally Posted by ssdjaggi

After 1 year i recover my alcatel 4030d with the help of you people. . Now my phone is working better then before more free ram with no lag thanks a lot.

Where solution file and link how did you done..?

[Brka]

Originally Posted by janalam143

Where solution file and link how did you done..?

Just read thread from beginning.

b.r.
Alex