Firmware for Alcatel1E 4034x-2AMPBGA

[ko-pach]

I flashed this phone with PIXI 4 (4) 4034x firmware. The phone power up (sound heard), but the screen is black. Any suggestions?

[Brka]

It's different hardware (different display), than models which have PID ending with numbers.

All that you need is (beside clear head) here :

https://forum.gsmhosting.com/vbb/f31...needed-2140512

tips:
- to make 4034x-2xxxxxA (LETTER at the end of a pid) phone show picture on screen, just flash lk.bin from compatible rom
or
- flash first 4034D-2xALRUA rom, phone should power on normally
- then just flash system + userdata + logo from any other rom, phone will have different languages

* please read whole thread and download all needed files before proceeding. *

Difference is ONLY in DISPLAY used (and flash memory used), and therefore :
- display driver is in lk.bin file
- flash memory definitions are in preloader*.bin file

and so =
- if phone doesnt power on after 4034D-2xALRUA - it needs different preloader
- if phone power on but no image - it needs different lk.bin

attached: correct preloader + lk for your device.

p.s. Post results

b.r.
Alex