GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Motorola Hardware Repair (https://forum.gsmhosting.com/vbb/f323/)
-   -   post me your problem in motorola and let me give you the rite solution (https://forum.gsmhosting.com/vbb/f323/post-me-your-problem-motorola-let-me-give-you-rite-solution-331333/)

lascar30 12-19-2006 16:45

dead v3i non-itunes
 
Hi,I got a dead v3i non-itunes. I tried to unlock it with gotmoto v0028 but it gives me an error at the end of all the process and the phone is now dead. No program detects it. Any solutions?:confused:

sajib_ngage 12-20-2006 12:37

V3x only keyped light after unlock with smart-moto 1.23..............................please help.............................

yobb 12-20-2006 13:25

hi guys i got a problem with my motorola e365, history was water damage i clean the keypad board but two pads not working, the right and left menu, can you give me some diagram for this? many thanks...

kyeechin 12-20-2006 14:02

i have E398 show battery invalid (water demage) any master can help to solve this problem thank very much ...........

pinni 12-20-2006 17:42

need flash file for mototola A-1200.....for spiness langvag....if aney one help me
thx .....
br .pinni

gsmsikar 12-20-2006 18:56

how to reset the lifetime of motorola c168 ?
by hand ?

IANIRCELL 12-23-2006 08:32

u6 invalid batery after unlock
 
hello: my englis is not good .
bueno les cuento mi problema por favor si alguien puede haga la traduccion.
tengo 2 motorola u6 que me quedaron en bateria invalida y no se como solucionarlo. los desbloquie utilizando el ciclone 3.9 con t.p y con un cargador en el conector de la bateria por favor si alguien tiene la solucion por favor escribame estare agradecido les dejo el msn [email protected]

TRABEL 12-23-2006 09:28

i have 3 pc's of E1 , all of them keypad not working , only power is working.
1 of the 3 also have "insert sim"
i have reflaw all area of keypad conections and components , also replaced keypad and resoldered conections.
still keys are freezez , only POWER is working.
anyone got a solution for this sh.ity phone ? :)

sajib_ngage 12-23-2006 13:34

I have one V3x.it is only keyped light after unlock.plz tell me what can be done?????

smartfone 12-23-2006 14:19

Not much solutions are given for this site.........

raparose 12-25-2006 09:38

Hi I need Help for MOTO V400 !
 
Cn u help me to how flash my motorola v400 ? or can u give me the flash file for this mobile ! acctualy i cant use GPRS properly on V400 so i need to repair my mobile java system. or u have any file or help me how to jave system update for my MOTO v400 ? pls if possible help me asap ! this is very helpfull for me !

raparose 12-25-2006 10:33

I need help for MY MOTO V400
 
Hi Dear ! i need flash file to flash my Motorola V400 ! IF U HAVE ANY SUGGESION ABT java sYSTEM UPDATE FIR v400 PLS LET ME ASAP ! I WILL WAITING FOR UR GREAT RESPONSE ! THNKS WITH REGARDS
RAJU

sarojrkl 12-25-2006 13:37

C350 Speker Problem
 
In c350 speaker works some times and it does not work somtimes I changed speaker same problem. Solution Plz. Thanks

Ramzan 12-25-2006 20:41

Hi Friends
I am fasing a problum with Motorola E 398.
when I press Power on battan Phone ***** (Boot Loder Virson and usb Transfar moad).
Give me a slution Please Herry

moda 12-26-2006 09:56

Hello,

Having problem with an L7 No keypad Backlight please help

B.R

Moda

syl phone 12-26-2006 11:46

v3x user lock
 
can any one tel me how can i remove user password of motorola v3x without flash?

mellieme 12-26-2006 19:36

v3 razr repair
 
need help with V3 razr, phone works great, BUT when making a call the person that I am calling cannot hear me, started when tried to change cover... please help!!! I miss my razr:( :confused: :eek:

mike-mty 12-27-2006 10:15

hi man, i need help with a motorola e365 dead phone,
i try testing voltage in the charger and is ok, also another batery, fuses...
anyway, some ideas? thanks in advance...

unterulmen 12-29-2006 22:18

I have unlocked a v3r with the old smart clip version (without Skey).
Yesterday I received the Skey and updated my Smart clip.

Now i can pds repair, but afterwards it is impossible to flash the phone.
I always get errors in block 0x10C00000 with smart clip, 0xE0731008 with rds lite or "Flashing codegroup 'cg1.smg' to 10092000
ERROR: FLASHCMD write error" with the P2k_easy_tool.

So, is it possible to repair the phone or is the flash chip damagaged?

I´ve read that with ultima box these damaged phones can be repaired, has anyone experience?

patches 01-04-2007 19:52

V60
 
I can't hear the other person talking to me? Sometimes it's good,but most of the time it's not.

cpredescu 01-05-2007 01:25

Editing seems for Motorola L6
 
After editing seems 0025_0001 and 0032_0001 the 'Smart Button' does not work anymore.
Please advise.
Thank you.

raparose 01-06-2007 08:11

Hi Dear can u help me how to download Got Moto online Software & i need the flash file for my V400 Motorola Phone. Pls help me asap !http://forum.gsmhosting.com/ubb/confused.gif

NareshGeorge 01-06-2007 08:59

Quote:

Originally Posted by greeni222000 (Post 1976213)
dear mates postme your problem in motorola handset then let me give you the true solution
:)

Hi this is NARESH GEORGE , HOW I WILL UNLOCK MOT.C-140 AND C-117, WHEN I AM PUTING SIM CARD IT SHOWS PHONE IS LOCK

EwoKiE 01-06-2007 12:23

Hi tried the testpoint even took it to different places with smartclip and still no joy ... flashed it with no probs (had to change the battery as mine was dead)..and still the same thing..
?????????
Now its on the way to motorola themselves to see what happens..got a normal V3 here for standbye (not the same tho)...
Let you guys know...

phylon 01-06-2007 22:50

C205 invalid charger problem solution needed. If this problem because of charger or what? And also if you have charging way schematics. Thanks!

patches 01-07-2007 05:47

V60
 
My V60 is sitting in a drawer. Ican't hear anyone and if that gets resolved I need it to be unlocked?

rain_89 01-09-2007 09:54

good day to every one.....
i have here c651..i need for a help on how to unluck thiss...
this is the EMEI.355881002918740
thanksssss.......

charles henrich 01-09-2007 22:11

Moto A1000
 
Quote:

Originally Posted by greeni222000 (Post 1976213)
dear mates postme your problem in motorola handset then let me give you the true solution
:)

DEAR MATE, I PURCHASED A A1000 A YEAR AGO, IT WAS WORKING GREAT!! STILL DOES BUT THE INTERNAL ANTENA IS NOT RECEIVING ANY LONGER, THAT IS I CANNOT RECEIVE SIGNAL ANYMORE, AT THE SAME PLACES WHERE I HAD A GREAT SIGNAL. ANYWAY, I TRY TO SEND IT BACK TO MOTO USA, BUT THEY DO NOT WANT TO REPAIR, SAYING THAT THIS PHONE IS NOT APROVED IN USA(FUNNY HUH?) WHERE CAN I SEND THE PHONE TO GET ITS ANTENA REPLACED, OT WHERE CAN I PURCHASE AN ANTENA, I DO IT MY SE3LF
THANKS

kyeechin 01-10-2007 10:08

E398 NOT CHARGING
ihave change connector & battery & chager but stillno effect????????
any master can help solve this problem!!!

muhammad irshad 01-10-2007 17:47

please tell me what is the way for unlock motorola m702ig.

techno_gate 01-12-2007 12:35

i have v3x moto when go to phone book ((please wait))
any body can help me
please

vsavalia 01-12-2007 20:11

My e398 dead. Please help me
 
I was flashing my motorola e-398. While the process was going on, somehow, cable get loose and disconnected. So it was intrupted at 45%. And now phone is not starting or not even flashing. So please show me the way to get my phone on. Its my mistake but now I want to restart the phone. PLease help me.

Netwolf0 01-12-2007 20:43

Hi (excuse me for my bad english, I'm Italian),


I read "Call failed" into my v3 black when i try to call. It doesn't work correctly but anytimes it works correctly.


Can my-self repair it?(i'm not expert)

What is the problem due?


thanks in advance

aikonmani 01-12-2007 22:47

c201 is restarting and also keypad is not working after fallen.
H/W or S/W?

aikonmani 01-12-2007 22:55

c117 unlocking
 
Quote:

Originally Posted by NareshGeorge (Post 2184433)
Hi this is NARESH GEORGE , HOW I WILL UNLOCK MOT.C-140 AND C-117, WHEN I AM PUTING SIM CARD IT SHOWS PHONE IS LOCK



c117 can be easily unlocked by infinity box only.

sajib_ngage 01-16-2007 07:30

Quote:

Originally Posted by techno_gate (Post 2196586)
i have v3x moto when go to phone book ((please wait))
any body can help me
please

just do master reset and post resulte.........................................:c onfused:

ethiomobile 01-16-2007 11:51

Hi Boss
I Need

To Solve My V3 Charging Problem Plz Help Me

ethiomobile 01-16-2007 11:51

Hi Boss
I Need

To Solve My V3 Charging Problem Plz Help Me

servis.t 01-16-2007 13:03

need charging sollution for v535. the battery metter disappears after i plug in the charger.

Windbreaker 01-17-2007 07:32

e1 rockr no keypad/display after unlocking..pls. help......thanks in advance...

deecee 01-17-2007 08:46

i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for this firmware version

deecee 01-17-2007 08:58

i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for supported version

deecee 01-17-2007 09:03

i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for...

deecee 01-17-2007 09:38

i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for this firmware version

any one plz help me.............

deecee 01-17-2007 09:39

i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. i hv not s,card .the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for this firmware version

any one plz help me.............

Anees-ur-rehman 01-17-2007 10:53

i have L7 after prepare phone in boot mode (this is my falt) phone is going an error Critical error" please tell me [email protected]

bibi019 01-17-2007 11:47

hello i want to know witch phone for this firmeware R4515_G_08_BD_2AR_2 i want to flash

bibi019 01-17-2007 11:49

hello i want to know witch phone for this firmeware R4515_G_08_BD_2AR_2 i want to flash this phone i dont know if it v3 or v3i or v3r or any v?? because in tha label its writen v3 but the tesp point is for v3 so some one can help it emergency know phone is dead
yhanks in advance
[email protected]

sajib_ngage 01-18-2007 10:21

Quote:

Originally Posted by deecee (Post 2206077)
i have mot v3(version A.52) want to unlock . i tried with smart moto using v3 testpoint. i hv not s,card .the msg show after reading imei no is............
unlocking phone......... unloccking is not supported for this firmware version

any one plz help me.............

man look this is v3r oky???????????????????????

and need S card for unlock this .............................:eek:

sajib_ngage 01-18-2007 10:25

Quote:

Originally Posted by anees_4ua (Post 2206241)
i have L7 after prepare phone in boot mode (this is my falt) phone is going an error Critical error" please tell me [email protected]

Repier pds then full flash with smart-moto..................:p


All times are GMT +1. The time now is 17:47.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.32249 seconds with 6 queries

SEO by vBSEO