post me your problem in motorola and let me give you the rite solution - Page 3 - GSM-Forum

brandon · 10-10-2006, 08:29

hi i also have a v3,no display on both lcds.i full flashed the phone still no display.the customer took the phone somewhere to get it unlocked.i dont know what the guys did.i tried new lcd & flex.thats not the problem.any ideas guys.its quite urgent.

regards b.

muddsar · 10-10-2006, 11:44

i have v3 boat loder 8.26 and it has falt contact provider ,i just unlock it but
same ,again i unlock it but time it remain same ,then i flash it ,it show its disply white ,and now its possition is very bad it is not read or write ,any slution fot it .................................................. ...............
waiting...........

sonumobile_1 · 10-13-2006, 15:11

am unlock by dmtools but errror by c117 any help pls
error:the selected maincode version is older than target,s(code:-371

amitks_in · 10-13-2006, 15:16

what is the boot version ! check #02# if its one of this 2.5.78.N & 2.5.78 boot versions !!

Then U need INFINITY BOX !

ZoHaiB_(FoneGSM) · 10-13-2006, 22:56

Quote:

Originally Posted by amitks_in

what is the boot version ! check #02# if its one of this 2.5.78.N & 2.5.78 boot versions !!

Then U need INFINITY BOX !

http:///vbb/showth...37#post2034137
http:///vbb/showth...47#post2034147

sonumobile_1 · 10-14-2006, 10:49

can some one tell me how to unlock motorola c-117(honda)
error:the selected maincode version is older than target,s(code:-371)

amitks_in · 10-14-2006, 11:33

Quote:

Originally Posted by sonumobile_1

can some one tell me how to unlock motorola c-117(honda)
error:the selected maincode version is older than target,s(code:-371)

I think U shall serach whole Forum now !

C-117 which comes FREEEEEE with HERO HONDA BIKE Or which has BOOT VERSIONS 2.5.78.N & 2.5.78 can not be unlocked FREEE !

ok ?? got it ? ONLY INFINITY BOX CAN UNLOCK IT !

amitks_in · 10-14-2006, 11:37

Quote:

Originally Posted by infozohaib

http:///vbb/showth...37#post2034137
http:///vbb/showth...47#post2034147

Bro. Its strange ! as u have done all the things ! plz check this also which bands are supported ! in band seletion u can check ! 850/ 900/ 1800 / 1900 ! If this is also ok ! then its HARDWARE FAULT ! and possible that before unlocking the phone customer had this fault !

wireless222 · 10-14-2006, 11:56

Hi
Help Me To Unlock My Motorola E1 Roker Plzzzzzzzzzzz

sonumobile_1 · 10-14-2006, 16:31

2.2.58.N FLEX FNN_C115_30_Z52 LANG PACK LPN_C115_LATAM_Z52
error:the selected maincode version is older than target,s(code:-371)
Originally Posted by Mithu
You can unlock it by flash with "Dmtool_V7.3.04.6".
Open Dmtool_V7.3.04.6,click add tab and select "E88N.2.0.13_NONEMEA.m0"
And agin click add tab and select "FFN_C115_09_111.m0" and agin click add tab and select "LPN_C115_ASIA2_111.m0". Thats mens you have to select 3 file.
but not ulock c117 pls help

ZoHaiB_(FoneGSM) · 10-14-2006, 22:57

Quote:

Originally Posted by amitks_in

Bro. Its strange ! as u have done all the things ! plz check this also which bands are supported ! in band seletion u can check ! 850/ 900/ 1800 / 1900 ! If this is also ok ! then its HARDWARE FAULT ! and possible that before unlocking the phone customer had this fault !

thanks for reply bro i can check it but band setting is ok but problem is still same and customer bring new phone i dont thing so it's faulty phone but as i tould u i saw this problem so many time only In L6 phone most of then On Virgin Mobile network.

kendevil · 10-16-2006, 07:56

i use the manual searh the network......but sometime have operation sometime dont have ........look like so weak oh.......can help ma

haveri · 10-16-2006, 09:43

hi

Moto V3 no light on LCD? , can anyone tell me how to solve this problem?

best.r

yestelecom · 10-16-2006, 14:16

hi guys need a v3 circuit diagram realy bad. ppppppppllllllllllzzzzzzzzzzzzzz help.

realmadrid · 10-16-2006, 17:54

my l 6 do invalid battrie any one have solution for this problem

10-16-2006, 14:16	#44 (permalink)
yestelecom Junior Member Join Date: Aug 2006 Posts: 15 Member: 332903 Status: Offline Thanks Meter: 0	hi guys need a v3 circuit diagram realy bad. ppppppppllllllllllzzzzzzzzzzzzzz help. Last edited by ..::Nokian Care®::..; 09-23-2013 at 04:47. Reason: Email removed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Post here any problem about Nokia keypad - key, and let me give you the solution	stefani	Nokia Repair Guide and FAQ	850	08-22-2013 12:05
Post me a problem in NOKIA and get it solved.	Shmona	Nokia Hardware & Hardware Repair	6	12-31-2007 09:17
Like allways, NsPro give you THE BEST, FASTEST and of chourse.. the REAL!!! solutions	Elco	NSPRO	73	04-25-2007 16:18

10-10-2006, 08:29	#31 (permalink)
brandon Freak Poster Join Date: Dec 2003 Age: 45 Posts: 400 Member: 45716 Status: Offline Thanks Meter: 38	hi i also have a v3,no display on both lcds.i full flashed the phone still no display.the customer took the phone somewhere to get it unlocked.i dont know what the guys did.i tried new lcd & flex.thats not the problem.any ideas guys.its quite urgent. regards b.

10-10-2006, 11:44	#32 (permalink)
muddsar Freak Poster Join Date: Jan 2006 Posts: 158 Member: 227361 Status: Offline Thanks Meter: 28	i have v3 boat loder 8.26 and it has falt contact provider ,i just unlock it but same ,again i unlock it but time it remain same ,then i flash it ,it show its disply white ,and now its possition is very bad it is not read or write ,any slution fot it .................................................. ............... waiting...........

10-13-2006, 15:11	#33 (permalink)
sonumobile_1 Freak Poster Join Date: Oct 2006 Location: chhattisgarh (raipur) Age: 44 Posts: 295 Member: 363250 Status: Offline Thanks Meter: 47	am unlock by dmtools but errror by c117 any help pls error:the selected maincode version is older than target,s(code:-371

10-13-2006, 15:16	#34 (permalink)
amitks_in No Life Poster Join Date: Jan 2005 Location: NEW DELHI, INDIA Age: 50 Posts: 1,688 Member: 111665 Status: Offline Sonork: 104250 Thanks Meter: 180	what is the boot version ! check #02# if its one of this 2.5.78.N & 2.5.78 boot versions !! Then U need INFINITY BOX !

10-14-2006, 10:49	#36 (permalink)
sonumobile_1 Freak Poster Join Date: Oct 2006 Location: chhattisgarh (raipur) Age: 44 Posts: 295 Member: 363250 Status: Offline Thanks Meter: 47	can some one tell me how to unlock motorola c-117(honda) error:the selected maincode version is older than target,s(code:-371)

10-14-2006, 11:56	#39 (permalink)
wireless222 Junior Member Join Date: Oct 2006 Posts: 16 Member: 364722 Status: Offline Thanks Meter: 6	Hi Help Me To Unlock My Motorola E1 Roker Plzzzzzzzzzzz

10-14-2006, 16:31	#40 (permalink)
sonumobile_1 Freak Poster Join Date: Oct 2006 Location: chhattisgarh (raipur) Age: 44 Posts: 295 Member: 363250 Status: Offline Thanks Meter: 47	2.2.58.N FLEX FNN_C115_30_Z52 LANG PACK LPN_C115_LATAM_Z52 error:the selected maincode version is older than target,s(code:-371) Originally Posted by Mithu You can unlock it by flash with "Dmtool_V7.3.04.6". Open Dmtool_V7.3.04.6,click add tab and select "E88N.2.0.13_NONEMEA.m0" And agin click add tab and select "FFN_C115_09_111.m0" and agin click add tab and select "LPN_C115_ASIA2_111.m0". Thats mens you have to select 3 file. but not ulock c117 pls help

10-16-2006, 07:56	#42 (permalink)
kendevil Crazy Poster Join Date: May 2006 Posts: 59 Member: 276692 Status: Offline Thanks Meter: 15	i use the manual searh the network......but sometime have operation sometime dont have ........look like so weak oh.......can help ma

10-16-2006, 09:43	#43 (permalink)
haveri No Life Poster Join Date: Jul 2005 Location: Republic of Kosova Age: 48 Posts: 521 Member: 158663 Status: Offline Thanks Meter: 27	hi Moto V3 no light on LCD? , can anyone tell me how to solve this problem? best.r

10-16-2006, 17:54	#45 (permalink)
realmadrid Freak Poster Join Date: Nov 2005 Location: in the heaven Posts: 484 Member: 201648 Status: Offline Thanks Meter: 19	my l 6 do invalid battrie any one have solution for this problem