1280 dead during flash - GSM-Forum

IvailoShopov · 02-24-2012, 12:44

Hi, I tried to flash this phone, but software "hanged" during flash procedure. Now the phone is dead. When try to flash it again I receive the following log:

Code:

WARNING:
	THE VERSION YOU SELECTED: 06.20
	is NOT the highest installed!!!
	the highest available is: 22.2.110
Content	rm6470_nai06.20eo
Ppm	rm647_006.20eo
Mcu	rm647_006.200
Processing File:  rm647_006.200
Boot...
Erase[0.00 MB]...
in 0.00s
Flash[0.00 MB]...no response fromphone

%%%%%%%% ERROR SENDING FLASH: 
Failed at address 00000000

Thanks !

komtel_f-mobile · 02-24-2012, 13:01

How do You doing? Try again via USB or 10pin's cable.

IvailoShopov · 02-24-2012, 13:28

Via FBUS 8pin and adapter to MT-Box. This scheme is working for me for long time and I have flashet a lot of 1280.

This phone doesn't have USB.

komtel_f-mobile · 02-24-2012, 14:25

I'm sorry, I'm mistake model.

Sucre79 · 02-24-2012, 21:27

try use lower version of mtb_nk (2.33- it have different loaders)

cristi_slob · 02-24-2012, 21:43

use anything else...box has bad connection with phone

try full erase,flash,flash pm, unlock,factory

IvailoShopov · 02-25-2012, 11:35

Quote:

Originally Posted by cristi_slob

use anything else...box has bad connection with phone

try full erase,flash,flash pm, unlock,factory

But the MT didn't made PM backup ?! I can't find it in directory. Do I need to pay for rpl service ?

02-24-2012, 12:44	#1 (permalink)
IvailoShopov Freak Poster Join Date: Aug 2003 Location: Bulgaria Age: 36 Posts: 254 Member: 37668 Status: Offline Thanks Meter: 15	1280 dead during flash Hi, I tried to flash this phone, but software "hanged" during flash procedure. Now the phone is dead. When try to flash it again I receive the following log: Code: WARNING: THE VERSION YOU SELECTED: 06.20 is NOT the highest installed!!! the highest available is: 22.2.110 Content rm6470_nai06.20eo Ppm rm647_006.20eo Mcu rm647_006.200 Processing File: rm647_006.200 Boot... Erase[0.00 MB]... in 0.00s Flash[0.00 MB]...no response fromphone %%%%%%%% ERROR SENDING FLASH: Failed at address 00000000 Thanks !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-01-2000 23:28

02-24-2012, 13:01	#2 (permalink)
komtel_f-mobile Insane Poster Join Date: Feb 2009 Location: 2156'E, 5138'N POLAND Age: 37 Posts: 60 Member: 968515 Status: Offline Thanks Meter: 10	How do You doing? Try again via USB or 10pin's cable.

02-24-2012, 13:28	#3 (permalink)
IvailoShopov Freak Poster Join Date: Aug 2003 Location: Bulgaria Age: 36 Posts: 254 Member: 37668 Status: Offline Thanks Meter: 15	Via FBUS 8pin and adapter to MT-Box. This scheme is working for me for long time and I have flashet a lot of 1280. This phone doesn't have USB.

02-24-2012, 14:25	#4 (permalink)
komtel_f-mobile Insane Poster Join Date: Feb 2009 Location: 2156'E, 5138'N POLAND Age: 37 Posts: 60 Member: 968515 Status: Offline Thanks Meter: 10	I'm sorry, I'm mistake model.

02-24-2012, 21:27	#5 (permalink)
Sucre79 No Life Poster Join Date: Oct 2010 Location: Poland (3 City) Posts: 656 Member: 1413902 Status: Offline Sonork: 100.1611698 Thanks Meter: 143	try use lower version of mtb_nk (2.33- it have different loaders)

02-24-2012, 21:43	#6 (permalink)
cristi_slob No Life Poster Join Date: Nov 2007 Location: romania Age: 40 Posts: 693 Member: 631660 Status: Offline Thanks Meter: 139	use anything else...box has bad connection with phone try full erase,flash,flash pm, unlock,factory