3 phone dead 6680 with mt box - GSM-Forum

sobi · 03-21-2007, 19:45

3 phone dead 6680 with mt box please help me
frist software this RM-36_dp_v_8[1].00_MCUSW5.050407_EURO and i
upgrade to this RM-36_dp_v_9.00_MCUSW5.050440_EURO now 3 phone is software is done but
only nokia come in display and restart please hlpe me?

SoftMobile · 03-21-2007, 20:34

Check your cable mate.

Kanwalgee · 03-22-2007, 06:39

Use 5 pin cable for flash with modified resister with 5.1.

irfanamin2 · 03-22-2007, 08:39

Mate! Post your logs.....

eivoig · 03-22-2007, 09:04

it depends upon you use it reflash it again and MCU and pm must have same version use FBUS flashing.....

sobi · 03-22-2007, 17:23

i use 5 pin cable and cable with mtbox i flash 6681 is ok also 6680 flash is done but same problem what i do? mt box log take

Phone is in: RF Innactive mode
Model: RM-36 ( RM-36)
V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki
Production serial number SGE966534
Product code 0521806
Module code
Basic production code 0516030
Flash code
Order number
Long production SN
MCU SW V 04wk47_m_v14.2.1/09-11-06/RM-36/(c) Noki
HW 6005
PCI
RFIC 150a160e
DSP pb04w47v23
Retu 32
Tahvo 41
IMEI: 355661006202865

VPP is DISABLED.
Processing File: RM36_5.050440_B5.C0R
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase RAP3 [00000000 - 00509309]
Erase RAP3 [006A0000 - 006BFFFF]
Erase RAP3 [006DF000 - 006EFFFF]
Erase RAP3 [00700000 - 007EFFFF]
Erase APE [00000000 - 0000FFFF]
Erase APE [00010000 - 0001FFFF]
Erase APE [00020000 - 000203FF]
Erase APE [00050000 - 01F5BFFF]
Erase[37.34 MB]...
Waiting response for 320 Sec...in 3.84s
Flash[20.25 MB]...in 72.20s
* * Processed file in 86.33 seconds
Processing File: RM36_5.050440_v2_B5.v30
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase APE [01060000 - 01F5BFFF]
Erase[14.98 MB]...
Waiting response for 320 Sec...in 1.95s
Flash[4.23 MB]...in 15.88s
* * Processed file in 28.53 seconds
* * * Phone flashing done in 2: 9 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki
IMEI: 355661006202865
Factory Default Settings...OK

bad_signal · 03-22-2007, 17:54

iam confusing
all is ok
all the operation is very clearley and sucessfully
i think it is hardware problem for ur phones
i have try flashing 6680 many many time without any problems
maybe u have to install another system ( Windows System )
and try again

sobi · 03-22-2007, 18:45

yes u are wrong man not hardware problem not windows problem working mobile i was flash with mt box . just for upgrading. mtbox kill the phone. only nokia with light and re start
you try and upgrade with this vr....RM-36_dp_v_9.00_MCUSW5.050440_EURO

sobi · 03-24-2007, 17:14

PLEASE solution
GIVE ME solution PLEASE

03-21-2007, 19:45	#1 (permalink)
sobi Junior Member Join Date: Jun 2005 Age: 46 Posts: 36 Member: 154796 Status: Offline Thanks Meter: 1	3 phone dead 6680 with mt box 3 phone dead 6680 with mt box please help me frist software this RM-36_dp_v_8[1].00_MCUSW5.050407_EURO and i upgrade to this RM-36_dp_v_9.00_MCUSW5.050440_EURO now 3 phone is software is done but only nokia come in display and restart please hlpe me?

03-22-2007, 17:23	#6 (permalink)
sobi Junior Member Join Date: Jun 2005 Age: 46 Posts: 36 Member: 154796 Status: Offline Thanks Meter: 1	log i use 5 pin cable and cable with mtbox i flash 6681 is ok also 6680 flash is done but same problem what i do? mt box log take Phone is in: RF Innactive mode Model: RM-36 ( RM-36) V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki Production serial number SGE966534 Product code 0521806 Module code Basic production code 0516030 Flash code Order number Long production SN MCU SW V 04wk47_m_v14.2.1/09-11-06/RM-36/(c) Noki HW 6005 PCI RFIC 150a160e DSP pb04w47v23 Retu 32 Tahvo 41 IMEI: 355661006202865 VPP is DISABLED. Processing File: RM36_5.050440_B5.C0R Boot... rap3gv2_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_gbbm.fg Erase RAP3 [00000000 - 00509309] Erase RAP3 [006A0000 - 006BFFFF] Erase RAP3 [006DF000 - 006EFFFF] Erase RAP3 [00700000 - 007EFFFF] Erase APE [00000000 - 0000FFFF] Erase APE [00010000 - 0001FFFF] Erase APE [00020000 - 000203FF] Erase APE [00050000 - 01F5BFFF] Erase[37.34 MB]... Waiting response for 320 Sec...in 3.84s Flash[20.25 MB]...in 72.20s * * Processed file in 86.33 seconds Processing File: RM36_5.050440_v2_B5.v30 Boot... rap3gv2_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_gbbm.fg Erase APE [01060000 - 01F5BFFF] Erase[14.98 MB]... Waiting response for 320 Sec...in 1.95s Flash[4.23 MB]...in 15.88s * * Processed file in 28.53 seconds * * * Phone flashing done in 2: 9 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki IMEI: 355661006202865 Factory Default Settings...OK

03-22-2007, 18:45	#8 (permalink)
sobi Junior Member Join Date: Jun 2005 Age: 46 Posts: 36 Member: 154796 Status: Offline Thanks Meter: 1	bad signal u are wrong yes u are wrong man not hardware problem not windows problem working mobile i was flash with mt box . just for upgrading. mtbox kill the phone. only nokia with light and re start you try and upgrade with this vr....RM-36_dp_v_9.00_MCUSW5.050440_EURO Last edited by sobi; 03-22-2007 at 18:58.

03-24-2007, 17:14	#9 (permalink)
sobi Junior Member Join Date: Jun 2005 Age: 46 Posts: 36 Member: 154796 Status: Offline Thanks Meter: 1	PLEASE solution PLEASE solution GIVE ME solution PLEASE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can flash Dead bb5 with Mt-box?	Wais777	MT-BOX	5	06-06-2008 17:03
how to flash a dead nokia1600 with mt box	Naseerjako	MT-BOX	1	02-08-2008 10:42
Unlock 6680 with mt-box ?	lilly1	MT-BOX	4	07-14-2007 15:37
dead 2310 with mt-box	Hannibal_Lecter	MT-BOX	11	02-23-2007 12:15
flashing nokia 6680 with mt-box	.:ramtelecom:.	MT-BOX	6	02-11-2007 22:38

03-21-2007, 20:34	#2 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	Check your cable mate.

03-22-2007, 06:39	#3 (permalink)
Kanwalgee No Life Poster Join Date: Jun 2004 Location: China Age: 46 Posts: 2,737 Member: 68392 Status: Offline Sonork: 100.100701 Thanks Meter: 658	Use 5 pin cable for flash with modified resister with 5.1.

03-22-2007, 08:39	#4 (permalink)
irfanamin2 No Life Poster Join Date: Sep 2004 Posts: 3,784 Member: 82423 Status: Offline Thanks Meter: 1,203	Mate! Post your logs.....

03-22-2007, 09:04	#5 (permalink)
eivoig No Life Poster Join Date: Jul 2001 Location: Spinning on my OWN Orbit Posts: 968 Member: 5358 Status: Offline Thanks Meter: 211	it depends upon you use it reflash it again and MCU and pm must have same version use FBUS flashing.....

03-22-2007, 17:54	#7 (permalink)
bad_signal Freak Poster Join Date: Jan 2005 Location: With My !!!? Posts: 456 Member: 107069 Status: Offline Thanks Meter: 31	iam confusing all is ok all the operation is very clearley and sucessfully i think it is hardware problem for ur phones i have try flashing 6680 many many time without any problems maybe u have to install another system ( Windows System ) and try again