8600 gallery problem after fbus flashing - GSM-Forum

roniri · 08-16-2007, 07:04

Hi!
I flash 8600 via fbus, the flashing run good,but gallery will be empty after flash. I try to flash again, and try to flash with another langpack, but same problem.
Model: RM-164 (Monaco )
V 03.52/24-05-07/RM-164 (c) Nokia.
Production serial number MYG578608
Product code 0548211
Module code 0203066
Basic production code 0532835
Flash code
Order number
Long production SN
MCU SW V 03.52/24-05-07/RM-164/(c) Nokia.
HW 4000
PCI
RFIC 17211721
DSP rm164_dsprap_pb05wk46v31_02
PPM V 03.52/24-05-07/RM-164/(c) Nokia. /D
Retu 32
Tahvo 53
IMEI: 356287010xxxxxxxx
Using Tx2 Data line
Processing File: rm164__03.52.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Backup: \GSM_35628701XXXXXXX_3.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 000BFFFF]
Erase RAP3 [000C0000 - 000D7FFF]
Erase RAP3 [000D8000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 002DFFFF]
Erase RAP3 [002E0000 - 00EFFFFF]
Erase RAP3 [01500000 - 0157FFFF]
Erase RAP3 [01580000 - 015FFFFF]
Erase[15.88 MB]...
Waiting response for 320 Sec...in 30.99s
Flash[12.55 MB]...in 46.99s
* * Processed file in 91.75 seconds
Processing File: rm164__03.52.image_d
Low level format...OK
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase[0.00 MB]...
Waiting response for 320 Sec...in 0.20s
Flash[9.08 MB]...in 0.02s
* * Processed file in 17.63 seconds
Extract content...OK
Processing File: rm164__03.52.ppm_d
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase RAP3 [00F00000 - 014FFFFF]
Erase[6.00 MB]...
Waiting response for 320 Sec...in 11.73s
Flash[4.77 MB]...in 18.28s
* * Processed file in 39.83 seconds
* * * Phone flashing done in 2:56 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 03.52/24-05-07/RM-164 (c) Nokia.
IMEI: 356287010XXXXXX
Factory Default Settings...OK
Pooling mode for profile update...
RM-164\RM164_0548211_03.52_005.dcpf\03.52\ProductProf ile_default.xml
Sending Profile to Phone...OK
Updating product code: 0548211
Reset user code...Successfull, code is 12345

It seems all is good. Is there any trick or experience about it?
Im waiting for your help!
Thanks,regards Roniri

Medved · 08-16-2007, 07:15

Flash via Phoenix & All will be OK. Tested 100%.

jodge · 08-16-2007, 07:23

hi
extras
automatic actions after flash
tick "force CP convert to 128k blabla"

enjoy

roniri · 08-16-2007, 08:10

@jodge
I tryd this method too,but flashing always stop!
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 000BFFFF]
Erase RAP3 [000C0000 - 000D7FFF]
Erase RAP3 [000D8000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 002DFFFF]
Erase RAP3 [002E0000 - 00EFFFFF]
Erase RAP3 [01500000 - 0157FFFF]
Erase RAP3 [01580000 - 015FFFFF]
Erase[15.88 MB]...
Waiting response for 320 Sec...in 34.53s
Flash[12.55 MB]...in 46.58s
* * Processed file in 90.83 seconds
Processing File: rm164__03.52.image_d
Force CP Convert to 128K PSize!!!
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase[0.00 MB]...
Waiting response for 320 Sec...in 0.22s
Flash[9.08 MB]...

I try to get usb cabel, maybe this help!

jodge · 08-16-2007, 08:41

hmmmm, is left over then the phoenix solution..

**koksi** · 08-16-2007, 09:09

which cable are you using? 7pin Jaf cable?

911GT · 08-16-2007, 10:35

we work at this problem and he will be solved in a very close future

skydreas · 08-21-2007, 08:10

You can download whole 8600 gallery from internet then upload it to phone

911GT · 08-21-2007, 10:13

we solve this problem. will be availible in next version but if you dont have a time download from here in forum beta 1.35__2.exe and all be ok

artur223 · 01-05-2008, 12:44

Quote:

Originally Posted by 911GT

we solve this problem. will be availible in next version but if you dont have a time download from here in forum beta 1.35__2.exe and all be ok

my gallery still empty, tried usb, tried 10 pin with tx2 line, still empty, any solution for that?

08-16-2007, 07:04	#1 (permalink)
roniri No Life Poster Join Date: Sep 2001 Location: Hungary, Pécs Age: 48 Posts: 1,240 Member: 6142 Status: Offline Sonork: i dont use it Thanks Meter: 47	8600 gallery problem after fbus flashing Hi! I flash 8600 via fbus, the flashing run good,but gallery will be empty after flash. I try to flash again, and try to flash with another langpack, but same problem. Model: RM-164 (Monaco ) V 03.52/24-05-07/RM-164 (c) Nokia. Production serial number MYG578608 Product code 0548211 Module code 0203066 Basic production code 0532835 Flash code Order number Long production SN MCU SW V 03.52/24-05-07/RM-164/(c) Nokia. HW 4000 PCI RFIC 17211721 DSP rm164_dsprap_pb05wk46v31_02 PPM V 03.52/24-05-07/RM-164/(c) Nokia. /D Retu 32 Tahvo 53 IMEI: 356287010xxxxxxxx Using Tx2 Data line Processing File: rm164__03.52.mcusw Boot... rap3gv3_2nd.fg RAP3Gv3_algo_xsr15.fg Backup: \GSM_35628701XXXXXXX_3.r3c Erase RAP3 [00000000 - 000006BF] Erase RAP3 [000006C0 - 000BFFFF] Erase RAP3 [000C0000 - 000D7FFF] Erase RAP3 [000D8000 - 000DFFFF] Erase RAP3 [00100000 - 001FFFFF] Erase RAP3 [00200000 - 002DFFFF] Erase RAP3 [002E0000 - 00EFFFFF] Erase RAP3 [01500000 - 0157FFFF] Erase RAP3 [01580000 - 015FFFFF] Erase[15.88 MB]... Waiting response for 320 Sec...in 30.99s Flash[12.55 MB]...in 46.99s * * Processed file in 91.75 seconds Processing File: rm164__03.52.image_d Low level format...OK Boot... rap3gv3_2nd.fg RAP3Gv3_algo_xsr15.fg Erase[0.00 MB]... Waiting response for 320 Sec...in 0.20s Flash[9.08 MB]...in 0.02s * * Processed file in 17.63 seconds Extract content...OK Processing File: rm164__03.52.ppm_d Boot... rap3gv3_2nd.fg RAP3Gv3_algo_xsr15.fg Erase RAP3 [00F00000 - 014FFFFF] Erase[6.00 MB]... Waiting response for 320 Sec...in 11.73s Flash[4.77 MB]...in 18.28s * * Processed file in 39.83 seconds * * * Phone flashing done in 2:56 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... V 03.52/24-05-07/RM-164 (c) Nokia. IMEI: 356287010XXXXXX Factory Default Settings...OK Pooling mode for profile update... RM-164\RM164_0548211_03.52_005.dcpf\03.52\ProductProf ile_default.xml Sending Profile to Phone...OK Updating product code: 0548211 Reset user code...Successfull, code is 12345 It seems all is good. Is there any trick or experience about it? Im waiting for your help! Thanks,regards Roniri

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8600 keypad problems after unlock	azo1yvo1	Nokia Hardware & Hardware Repair	1	09-30-2008 17:40
8600 keypad problems after unlock	Colin	Nokia Hardware & Hardware Repair	0	01-24-2008 13:09
8600 keypad problems after unlock	Colin	MT-BOX	1	01-24-2008 12:59

08-16-2007, 07:15	#2 (permalink)
Medved Freak Poster Join Date: Feb 2005 Location: Ukraine Age: 43 Posts: 285 Member: 117914 Status: Offline Thanks Meter: 96	Flash via Phoenix & All will be OK. Tested 100%.

08-16-2007, 07:23	#3 (permalink)
jodge No Life Poster Join Date: Apr 2004 Posts: 753 Member: 61389 Status: Offline Thanks Meter: 193	hi extras automatic actions after flash tick "force CP convert to 128k blabla" enjoy

08-16-2007, 08:10	#4 (permalink)
roniri No Life Poster Join Date: Sep 2001 Location: Hungary, Pécs Age: 48 Posts: 1,240 Member: 6142 Status: Offline Sonork: i dont use it Thanks Meter: 47	@jodge I tryd this method too,but flashing always stop! Boot... rap3gv3_2nd.fg RAP3Gv3_algo_xsr15.fg Erase RAP3 [00000000 - 000006BF] Erase RAP3 [000006C0 - 000BFFFF] Erase RAP3 [000C0000 - 000D7FFF] Erase RAP3 [000D8000 - 000DFFFF] Erase RAP3 [00100000 - 001FFFFF] Erase RAP3 [00200000 - 002DFFFF] Erase RAP3 [002E0000 - 00EFFFFF] Erase RAP3 [01500000 - 0157FFFF] Erase RAP3 [01580000 - 015FFFFF] Erase[15.88 MB]... Waiting response for 320 Sec...in 34.53s Flash[12.55 MB]...in 46.58s * * Processed file in 90.83 seconds Processing File: rm164__03.52.image_d Force CP Convert to 128K PSize!!! Boot... rap3gv3_2nd.fg RAP3Gv3_algo_xsr15.fg Erase[0.00 MB]... Waiting response for 320 Sec...in 0.22s Flash[9.08 MB]... I try to get usb cabel, maybe this help!

08-16-2007, 08:41	#5 (permalink)
jodge No Life Poster Join Date: Apr 2004 Posts: 753 Member: 61389 Status: Offline Thanks Meter: 193	hmmmm, is left over then the phoenix solution..

08-16-2007, 09:09	#6 (permalink)
koksi Product Manager Join Date: Jan 2003 Posts: 411 Member: 19575 Status: Offline Thanks Meter: 134	which cable are you using? 7pin Jaf cable?

08-16-2007, 10:35	#7 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	we work at this problem and he will be solved in a very close future

08-21-2007, 08:10	#8 (permalink)
skydreas Freak Poster Join Date: Feb 2006 Posts: 110 Member: 237816 Status: Offline Thanks Meter: 4	You can download whole 8600 gallery from internet then upload it to phone

08-21-2007, 10:13	#9 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	we solve this problem. will be availible in next version but if you dont have a time download from here in forum beta 1.35__2.exe and all be ok