GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Griffin Products > MT-BOX
Reload this Page cant dowgrade 6288 fromm ver. 6.10 to 3.81
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Wholesale Unlock ★ Direct Unlock Source Search Today's Posts Mark Forums Read

Reply
Page 1 of 4 1 234
 
LinkBack Thread Tools Display Modes
Old 09-03-2007, 16:41   #1 (permalink)
No Life Poster
 
F@RUK S's Avatar
 
Join Date: Jan 2004
Location: Madrid, ES.
Age: 41
Posts: 2,266
Member: 51153
Status: Offline
Sonork: 100.113241
Thanks Meter: 3,682
cant dowgrade 6288 fromm ver. 6.10 to 3.81

hone is in: Local mode
Scanning files, please wait...
Done
WARNING:
THE VERSION YOU SELECTED: 03.81
is NOT the highest installed!!!
the highest available is: 06.43
Model: RM-78 (New York/New ****** )
V 06.10/21-12-06/RM-78 (c) Nokia
Production serial number CKK755987
Product code 0541913
Module code
Basic production code 0540642
Flash code
Order number
Long production SN
MCU SW V 06.10/21-12-06/RM-78/(c) Nokia
HW 2009
PCI
RFIC 17211721
DSP pb05w46v46
LCD SHARP
PPM V 06.10/21-12-06/RM-78/(c) Nokia/C
Retu 32
Tahvo 53
Content Pack Content: 3_uk/V 06.10/21-12-06/RM-78/(c) Nokia/
IMEI: 354558015106809
WARNING: VPP pin is not connected, disabling VPP.

BB5 Downgrade - - - - - - - - - - -
VBat is 3.87V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Found record. Clearing and sending to phone..
============== Staring flash procedure =================
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830003.810.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_0.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.69 MB]...
Waiting response for 320 Sec...in 80.91s
Flash[14.71 MB]...in 57.17s
* * Processed file in 148.92 seconds
Processing File: rm7830003.81.image_3_se
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 45.39s
Flash[2.94 MB]...in 10.50s
* * Processed file in 83.25 seconds
No need to extract content.
Processing File: rm783003.81.ppm_a
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 20.67s
Flash[3.82 MB]...in 14.92s
* * Processed file in 43.61 seconds
* * * Phone flashing done in 4:57 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830003.810.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_1.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.69 MB]...
Waiting response for 320 Sec...in 74.91s
Flash[14.71 MB]...in 56.42s
* * Processed file in 142.20 seconds
Processing File: rm7830003.81.image_3_se
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 25.88s
Flash[2.94 MB]...in 10.36s
* * Processed file in 64.08 seconds
Extract content...fail
Processing File: rm783003.81.ppm_a
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 19.69s
Flash[3.82 MB]...in 14.56s
* * Processed file in 42.27 seconds
* * * Phone flashing done in 5:32 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
WARNING:
THE VERSION YOU SELECTED: 03.81
is NOT the highest installed!!!
the highest available is: 06.43
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830003.810.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_2.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.69 MB]...
Waiting response for 320 Sec...in 74.94s
Flash[14.71 MB]...in 56.09s
* * Processed file in 141.91 seconds
Processing File: rm7830003.81.image_o2post_uk
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 25.42s
Flash[2.75 MB]...in 9.72s
* * Processed file in 62.97 seconds
Extract content...fail
Processing File: rm783003.81.ppm_c
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 19.81s
Flash[4.03 MB]...in 15.36s
* * Processed file in 43.23 seconds
* * * Phone flashing done in 5:30 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
Selected Highest installed version: 06.43
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830006.430.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_3.r3c
Erase RAP3 [00000000 - 000202BF]
Erase RAP3 [00020300 - 000252FF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.77 MB]...
Waiting response for 320 Sec...in 75.63s
Flash[15.93 MB]...in 60.84s
* * Processed file in 147.33 seconds
Processing File: rm7830006.43.image_o2post_uk
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830006.430.mcusw
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830006.430.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_4.r3c
Erase RAP3 [00000000 - 000202BF]
Erase RAP3 [00020300 - 000252FF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.77 MB]...
Waiting response for 320 Sec...in 80.59s
Flash[15.93 MB]...in 60.28s
* * Processed file in 151.73 seconds
Processing File: rm7830006.43.image_o2post_uk
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 26.55s
Flash[2.88 MB]...in 10.03s
* * Processed file in 64.00 seconds
Extract content...fail
Processing File: rm783006.43.ppm_c
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 21.05s
Flash[4.00 MB]...in 15.09s
* * Processed file in 44.20 seconds
* * * Phone flashing done in 5:43 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 06.43/30-03-07/RM-78 (c) Nokia
IMEI: 354558015106809
Factory Default Settings...OK
WARNING:
THE VERSION YOU SELECTED: 03.81
is NOT the highest installed!!!
the highest available is: 06.43

BB5 Downgrade - - - - - - - - - - -
VBat is 3.86V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Found record. Clearing and sending to phone..
============== Staring flash procedure =================
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830003.810.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35455801510680_5.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.69 MB]...
Waiting response for 320 Sec...in 81.03s
Flash[14.71 MB]...in 55.53s
* * Processed file in 147.41 seconds
Processing File: rm7830003.81.image_o2post_uk
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 28.09s
Flash[2.75 MB]...in 9.59s
* * Processed file in 65.02 seconds
Extract content...fail
Processing File: rm783003.81.ppm_c
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 20.25s
Flash[4.03 MB]...in 15.09s
* * Processed file in 43.34 seconds
* * * Phone flashing done in 5:39 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
  Reply With Quote
Old 09-03-2007, 17:51   #2 (permalink)
No Life Poster
 
RRRRR's Avatar
 
Join Date: Oct 2004
Location: Latvia-Riga
Age: 44
Posts: 989
Member: 88823
Status: Offline
Thanks Meter: 26
Flash To 6.10 Write Pm From 6280 Then To 3.81 And Unlock
  Reply With Quote
Old 09-04-2007, 00:12   #3 (permalink)
No Life Poster
 
I_sumo's Avatar
 
Join Date: Sep 2003
Location: INDIA
Posts: 605
Member: 38103
Status: Offline
Sonork: 100.100782
Thanks Meter: 165
Mostly a cable issue. It must switch over the phone easily between local and flash mode.
  Reply With Quote
Old 09-04-2007, 10:43   #4 (permalink)
No Life Poster
 
911GT's Avatar
 
Join Date: Dec 2006
Posts: 5,760
Member: 409197
Status: Offline
Thanks Meter: 75
see this log!!!! when i can then every who have a MT-BOX and FBUS cable can!!!!!!! if anybody cannot then unlock phone not for free and stop to write some bull6eet


Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 06.43
Model: RM-78 ( 6280/6288)
V 06.43/30-03-07/RM-78 (c) Nokia
Production serial number SDF549326
Product code 0529993
Module code
Basic production code 0520041
Flash code
Order number
Long production SN
MCU SW V 06.43/30-03-07/RM-78/(c) Nokia
HW 1000
PCI
RFIC 17191719
DSP pb05w46v49
LCD SHARP
PPM V 06.43/30-03-07/RM-78/(c) Nokia/E
Retu 32
Tahvo 52
Content Pack Content: e/V 06.43/30-03-07/RM-78/(c) Nokia
IMEI: 357603002214120
WARNING:
THE VERSION YOU SELECTED: 03.81
is NOT the highest installed!!!
the highest available is: 06.43

BB5 Downgrade - - - - - - - - - - -
VBat is 3.96V

Vpp pin has 1.34V, Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Found record. Clearing and sending to phone..
============== Staring flash procedure =================
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm7830003.810.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35760300221412_2.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.69 MB]...
Waiting response for 320 Sec...in 86.72s
Flash[14.71 MB]...in 31.09s
* * Processed file in 129.58 seconds
Processing File: rm7830003.81.image_e
Low level format...fail
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [016E0000 - 01FDFFFF]
Erase[9.00 MB]...
Waiting response for 320 Sec...in 25.13s
Flash[2.63 MB]...in 5.58s
* * Processed file in 91.27 seconds
Extract content...fail
Processing File: rm783003.81.ppm_e
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [011E0000 - 016DFFFF]
Erase[5.00 MB]...
Waiting response for 320 Sec...in 23.80s
Flash[4.46 MB]...in 9.45s
* * Processed file in 42.22 seconds
* * * Phone flashing done in 5:46 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 03.81/09-05-06/RM-78 (c) Nokia
IMEI: 357603002214120
Factory Default Settings...OK
  Reply With Quote
Old 09-08-2007, 10:30   #5 (permalink)
Freak Poster
 
gsmjunction's Avatar
 
Join Date: Jan 2005
Age: 43
Posts: 280
Member: 104847
Status: Offline
Thanks Meter: 5
6288 downgrade to 3.81
this is true with me also
i have downgraded around 10 6280 handsets with mt all successful but today i got 6288 to unlock so i downgraded from 6.81 to 3.81 but phone in blinking so i tried with jaf and it was successfully downgraded
please mt check if any bug in software..........
  Reply With Quote
Old 09-08-2007, 12:00   #6 (permalink)
Freak Poster
 
Join Date: Jan 2006
Posts: 112
Member: 225100
Status: Offline
Thanks Meter: 12
please post pm from 6280
  Reply With Quote
Old 09-08-2007, 12:10   #7 (permalink)
No Life Poster
 
SoftMobile's Avatar
 
Join Date: Feb 2002
Location: Hong Kong
Posts: 4,330
Member: 9290
Status: Offline
Sonork: 100.57287
Thanks Meter: 35
@Smart-bos

There is a many pm file, just go to C:\Program Files\GriffinTeam\MT-Box\pm_files\
  Reply With Quote
Old 09-08-2007, 12:44   #8 (permalink)
Freak Poster
 
Join Date: Jan 2006
Posts: 112
Member: 225100
Status: Offline
Thanks Meter: 12
shoud I write

6280_rm-78_mt.pm OR
6280_rm-78_mt-full.pm
  Reply With Quote
Old 09-08-2007, 12:54   #9 (permalink)
No Life Poster
 
SoftMobile's Avatar
 
Join Date: Feb 2002
Location: Hong Kong
Posts: 4,330
Member: 9290
Status: Offline
Sonork: 100.57287
Thanks Meter: 35
Same files as you use for flash
  Reply With Quote
Old 09-08-2007, 13:35   #10 (permalink)
No Life Poster
 
ARBI's Avatar
 
Join Date: Dec 2003
Location: Canary Islands, Spain.
Age: 39
Posts: 539
Member: 45456
Status: Offline
Thanks Meter: 6
u must to write a good Pm of one 6280 v3.81
tested

regards
  Reply With Quote
Old 09-08-2007, 13:38   #11 (permalink)
Junior Member
 
Join Date: Apr 2006
Location: Perth, Australia
Age: 42
Posts: 27
Member: 262363
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by gsmjunction View Post
this is true with me also
i have downgraded around 10 6280 handsets with mt all successful but today i got 6288 to unlock so i downgraded from 6.81 to 3.81 but phone in blinking so i tried with jaf and it was successfully downgraded
please mt check if any bug in software..........
use jaf to downgrade. i tried several times downgrading 6.43 to 3.81 with the same problem. jaf worked first time then mt-pro to unlock
  Reply With Quote
Old 09-08-2007, 18:02   #12 (permalink)
No Life Poster
 
911GT's Avatar
 
Join Date: Dec 2006
Posts: 5,760
Member: 409197
Status: Offline
Thanks Meter: 75
in new version who will out in a few days this problem is fixed problem with downgrade 6280 and 6288
  Reply With Quote
Old 09-13-2007, 09:46   #13 (permalink)
No Life Poster
 
vandal's Avatar
 
Join Date: Dec 2003
Location: UNSHAKEABLE LIFE
Posts: 754
Member: 45656
Status: Offline
Thanks Meter: 31
am flashing with usb please why do i get this erro when i try to downgrade 6280
Using Tx2 Data line.
BB5 PM back Phone is in: Normal mode
IMEI: 357603000973826
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-78_357603000973826.pm
Processing File: rm7830003.810.mcusw
Boot...
\\?\nmwcd#vid_0421&pid_045a&if_oth#7&7c66466&0&05# {4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ADL code

%%%%%%%% ERROR BOOTING:
  Reply With Quote
Old 09-13-2007, 09:58   #14 (permalink)
No Life Poster
 
damabib's Avatar
 
Join Date: Jan 2005
Location: EVERYWHERE U GO
Age: 46
Posts: 4,800
Member: 106026
Status: Offline
Sonork: 100.77890
Thanks Meter: 127
Quote:
Originally Posted by 911GT View Post
in new version who will out in a few days this problem is fixed problem with downgrade 6280 and 6288
@VANDAL STICKS WITH DIS...USE JAF WITH DIS FONE...
  Reply With Quote
Old 09-13-2007, 10:28   #15 (permalink)
No Life Poster
 
911GT's Avatar
 
Join Date: Dec 2006
Posts: 5,760
Member: 409197
Status: Offline
Thanks Meter: 75
1st - use 1.37
2nd uncheck usetx2line with usb cable
3th check DsableVPP with usb cable and all be ok
  Reply With Quote
Reply
Page 1 of 4 1 234

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
6288 ver 6.10 is not supported by bb5king please update omer100 BB5KING 0 11-26-2008 17:47
hello i got this message if i try to dowgrade 6131 ver 6.10 to 5.50 mbourtelephone MT-BOX 5 06-13-2007 20:49

 



All times are GMT +1. The time now is 17:33.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2023 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.23542 seconds with 9 queries

SEO by vBSEO