error flash nam-2 2100 with mtb-nk 1.29.5
 

this bug or not i allways error flash DCT-3 with my box

Processing File: nam205.110
Boot...
I28f160.tia
Erase[2.05 MB]...
erasing region [00200000 to 003FBFFF]
erasing region [003F0000 to 003FFFFF]
in 31.59s
Flash[1.38 MB]...in 18.67s
* * Processed file in 55.41 seconds
Processing File: nam205.11f
Boot...
Erase[0.00 MB]...
in 0.02s
Flash[0.56 MB]...in 7.80s
* * Processed file in 9.84 seconds
Processing File: 2100_eeprom.fls
Boot...
Erase[0.00 MB]...
in 0.00s
Flash[0.06 MB]...in 0.72s
* * Processed file in 2.75 seconds
* * * Phone flashing done in 1:10 minutes

Post Flash serial tunning of phone....
DCT3 Phone, Update FAID...
IMEI Repair: 35147830731296
DCT3 FactorySet Command Fail

where is problem?
may ne in cable and phone after flash don go in local mode for serial comnad for full factory settings.
remove and put cable again and try only full factory settings i am think all be ok.

hmm...same for me with 2310...after pm flash end always show me error...flashes for 2310 are corrupted /after install install process stop without info...now after flash version 5.10 can not alive phone...very strange...flash was very exellent before...never have problems...

try to reinstall packed with flashes again