how to flash 3110c with MT BOX

[Misbahullah]

i don't know why it gets jam while flashing any bb5 model when i flash dct4 it is ok but when i want to flash any bb5 it gets jam at the erase 320.....

[xerraco]

Please Use USB cable Mate.

[Misbahullah]

how to flash it with fbus cable any idea please

[Riteshgpt60]

Use 10 pin cable for bb5 fones else tick tick vpp

Originally Posted by Misbahullah

how to flash it with fbus cable any idea please

[madaaly]

Phone is in: Local mode
Model: RM-237 ( 3110c)
V 06.60/21-05-08/RM-237 (c) Nokia.
Production serial number 7G1655990
Product code 0554206
Module code 0203291
Basic production code 0542523
Flash code
Order number
Long production SN
MCU SW V 06.60/21-05-08/RM-237/(c) Nokia.
HW 2005
PCI
RFIC 17211721
DSP ICPR61_08w10
PPM V 06.60/21-05-08/RM-237/(c) Nokia. /I
Retu 32
Tahvo 53
Content Pack Content: i_blue/V 06.60/21-05-08/RM-237/(c) Nokia. /
IMEI: 358672017850052
WARNING: VPP pin is not connected, disabling VPP.
============= Set Flash mode for info =============
VBat is 3.93V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006010C192101001101
EM_ASIC_ID( RAP ):
00000232
EM_ASIC_ID( RAP ):
00000353
PUBLIC_ID( RAP ):
08C00113F4186E562FD178BB6DA1134F82C4FC0D
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
BAF3A9C3DBFA8454937DB77F2B8852B1
ROM_ID( RAP ):
191EC665DFAAF68F
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: SGS, 0020 881C 0000 6A21
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
VBat is 3.96V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RM-237 ( 3110c)
V 06.60/21-05-08/RM-237 (c) Nokia.
IMEI: 358672017850052
VPP is DISABLED.
Using Tx2 Data line.
Processing File: rm237__07.01.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 0031FFFF]
Erase RAP3 [00320000 - 0105FFFF]
Erase RAP3 [01060000 - 01067FFF]
Erase RAP3 [01068000 - 0107FFFF]
Erase[16.38 MB]...
Waiting response for 320 Sec...in 54.99s
Flash[14.45 MB]...
Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000
VPP is DISABLED.
Processing File: rm237__07.01.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 0031FFFF]
Erase RAP3 [00320000 - 0105FFFF]
Erase RAP3 [01060000 - 01067FFF]
Erase RAP3 [01068000 - 0107FFFF]
Erase[16.38 MB]...
Waiting response for 320 Sec...in 71.83s
Flash[14.45 MB]...in 41.98s
* * Processed file in 121.86 seconds
Processing File: rm237__07.01.image_mea1
Low level format...OK
Content area page size is 128K.
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01520000 - 01FDFFFF]
Erase[10.75 MB]...
Waiting response for 320 Sec...in 44.61s
Flash[3.25 MB]...in 12.09s
* * Processed file in 73.63 seconds
Extract content...OK
Processing File: rm237__07.01.ppm_mea1
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01080000 - 0151FFFF]
Erase[4.63 MB]...
Waiting response for 320 Sec...in 19.11s
Flash[2.79 MB]...in 8.20s
* * Processed file in 35.31 seconds
* * * Phone flashing done in 4:19 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 07.01/21-08-08/RM-237 (c) Nokia.
IMEI: 358672017850052
Factory Default Settings...OK

[imran78669]

But i have 0 point cable use but same eeror waaaaaaaaaaait 320 secand then got eeror.its always in bb5 mobile .dct4 is ok