N95 dead after flashing with usb,I have griffin cable... - GSM-Forum

zoki · 06-01-2007, 10:05

I flash my phone with phoenix via usb cable,and is dead only Nokia logo.I have griffin cable but I have this error:

Scanning files, please wait...
Done
Selected Highest installed version: 10.0.018
Using Tx2 Data line.
Processing File: RM-159_10.0.018_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:

What it's wrong?

TopGsm2002 · 06-01-2007, 13:08

hi
modify your FBUS cable & use to flash phone.

smootny · 07-02-2007, 17:37

how modify ? change rj45 on rj 48 and add pins ?
or add some pins ?

sonkar · 07-02-2007, 19:19

This thing for N95 is anoying a lot people,i've 2 cables 1 with tx2 line and without,no one is working for N95,but i connect the cables to twister and the enters in test mode,but mt-box dont do nothing.
Both cables are modified.

911GT · 07-02-2007, 23:35

for flashing n95 you need to have a TX2. find shematic in forum and modify your cable then you have a BOOT OK

sonkar · 07-03-2007, 10:58

I have the schematic and i've checked my cable and everithing looks ok,i dont find any error in connections.

911GT · 07-03-2007, 13:02

then your rj-48 on a box is brocken may be.
click on 6th buton and send the log

HAROON's · 07-03-2007, 13:15

yes log is better ot help you out

best of luck
&
Best Regards

GSMCrazy1

sonkar · 07-03-2007, 13:29

This is what i get:
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Using Tx2 Data line.
Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit
============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
What can the problem be.When i connect cable to twister i've done factory defaults without any problem.I'm only having problem for flasing this phone,all other N series or E series without any problem,of course for other cables i use adaptor,this one i connect directly.

sonkar · 07-03-2007, 13:37

Sorry this is log when i use cable without tx line+adaptor
============= Set Flash mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
Failed to boot send APE 2ND (bad APE)
Phone Type: BB5
------------------- SYSTEM ID Response: 11 blocks -------------
SYSTEM_ASIC_ID( APE ):
24200705
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
A7F04A5753EA280915EA6178D6467F23F94B11A1
ROOT_KEY_HASH( APE ):
BA8710A7E1CD5A2909B9A875DB27AA2400000000
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B21
PUBLIC_ID( RAP ):
0D900001CE4400580F39C32B9A2DC9F3F4C0A8B6
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0035 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

hicvb7 · 07-03-2007, 13:55

i had the same problem but with N93
this is what i did:

1-flash only MCU
2-reconnect box
3-flash only PPM

phone revive again
just try this solution you have no think 2 lose !

stefanusrudy · 07-04-2007, 05:19

Quote:

Originally Posted by sonkar

Sorry this is log when i use cable without tx line+adaptor
============= Set Flash mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
Failed to boot send APE 2ND (bad APE)
Phone Type: BB5
------------------- SYSTEM ID Response: 11 blocks -------------
SYSTEM_ASIC_ID( APE ):
24200705
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
A7F04A5753EA280915EA6178D6467F23F94B11A1
ROOT_KEY_HASH( APE ):
BA8710A7E1CD5A2909B9A875DB27AA2400000000
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B21
PUBLIC_ID( RAP ):
0D900001CE4400580F39C32B9A2DC9F3F4C0A8B6
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0035 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

should be like this:

Quote:

============= Set Flash mode for info =============

Vpp pin has 2.27V, Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
Using Tx2 Data line.
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
teflon_sam_nand_xsr151_m1.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 11 blocks -------------
SYSTEM_ASIC_ID( APE ):
24200705
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
34C1B69C976CD3825560DD60F0A29ECF3E563ED4
ROOT_KEY_HASH( APE ):
BA8710A7E1CD5A2909B9A875DB27AA2400000000
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B21
PUBLIC_ID( RAP ):
1EA00012CB480058094A552DB2E96DFB8B484D49
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0035 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============

Vpp pin has 2.27V, Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RM-159 (N95)
V 06wk41v18.4/13-03-07/RM-159 (c) Nokia
IMEI: 354835011550887

http://forum.gsmhosting.com/vbb/show...3&postcount=12

so, there're 2 options:
- make/modify cable become rj48/10 pins cable.
- modify mt-box 10 to 8 adapter, use 7th pin in rj45 (between vbat & bsi) to make tx2 line, connect to rx2 in phone.

regards

dvdaio · 07-16-2007, 23:17

i want to know hot modfy the cable 10 pin to work with 8 pin please i want more details

911GT · 07-17-2007, 13:49

need to open adapter and solder wire to grey wire.
this cable is TX2 line. on a cable for phone need put one more pin for a tx2 line and solder wire,then connect 2 wires

dvdaio · 07-17-2007, 14:26

can you explain to me with drawing a picture hot to mdify my adapter please

06-01-2007, 10:05	#1 (permalink)
zoki No Life Poster Join Date: Apr 2001 Location: Macedonia Age: 49 Posts: 1,323 Member: 4123 Status: Offline Thanks Meter: 27	N95 dead after flashing with usb,I have griffin cable... I flash my phone with phoenix via usb cable,and is dead only Nokia logo.I have griffin cable but I have this error: Scanning files, please wait... Done Selected Highest installed version: 10.0.018 Using Tx2 Data line. Processing File: RM-159_10.0.018_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING: What it's wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n95 8giga dead after flash with usb	melgsm	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	5	11-15-2009 09:42
N95 dead after flashing with Phoenix	zoki	Nokia Base Band 5 ( BB-5 )	10	05-10-2007 21:09
J300i dead after flashing with usb smart som one can help???	.::Moby World::.	SonyEricsson (USB-Smart)	8	12-20-2005 20:14

06-01-2007, 13:08	#2 (permalink)
TopGsm2002 Insane Poster Join Date: Jul 2002 Location: E.T.F Posts: 95 Member: 13746 Status: Offline Thanks Meter: 2	hi modify your FBUS cable & use to flash phone.

07-02-2007, 17:37	#3 (permalink)
smootny Freak Poster Join Date: Aug 2004 Location: Livingston Age: 44 Posts: 315 Member: 77136 Status: Offline Thanks Meter: 12	how modify ? change rj45 on rj 48 and add pins ? or add some pins ?

07-02-2007, 19:19	#4 (permalink)
sonkar No Life Poster Join Date: Dec 2000 Location: las palmas ,spain Posts: 2,012 Member: 2800 Status: Offline Thanks Meter: 47	This thing for N95 is anoying a lot people,i've 2 cables 1 with tx2 line and without,no one is working for N95,but i connect the cables to twister and the enters in test mode,but mt-box dont do nothing. Both cables are modified.

07-02-2007, 23:35	#5 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	for flashing n95 you need to have a TX2. find shematic in forum and modify your cable then you have a BOOT OK

07-03-2007, 10:58	#6 (permalink)
sonkar No Life Poster Join Date: Dec 2000 Location: las palmas ,spain Posts: 2,012 Member: 2800 Status: Offline Thanks Meter: 47	I have the schematic and i've checked my cable and everithing looks ok,i dont find any error in connections.

07-03-2007, 13:02	#7 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	then your rj-48 on a box is brocken may be. click on 6th buton and send the log

07-03-2007, 13:15	#8 (permalink)
HAROON's No Life Poster Join Date: Dec 2004 Location: Manama / BAHRAIN Posts: 1,665 Member: 100592 Status: Offline Sonork: 1578498 Thanks Meter: 245	yes log is better ot help you out best of luck & *Best Regards* GSMCrazy1

07-03-2007, 13:29	#9 (permalink)
sonkar No Life Poster Join Date: Dec 2000 Location: las palmas ,spain Posts: 2,012 Member: 2800 Status: Offline Thanks Meter: 47	This is what i get: Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Boot... Using Tx2 Data line. Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit ============= Set FBus mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 What can the problem be.When i connect cable to twister i've done factory defaults without any problem.I'm only having problem for flasing this phone,all other N series or E series without any problem,of course for other cables i use adaptor,this one i connect directly.

07-03-2007, 13:37	#10 (permalink)
sonkar No Life Poster Join Date: Dec 2000 Location: las palmas ,spain Posts: 2,012 Member: 2800 Status: Offline Thanks Meter: 47	Sorry this is log when i use cable without tx line+adaptor ============= Set Flash mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg Failed to boot send APE 2ND (bad APE) Phone Type: BB5 ------------------- SYSTEM ID Response: 11 blocks ------------- SYSTEM_ASIC_ID( APE ): 24200705 ASIC_MODE_ID( APE ): 00 PUBLIC_ID( APE ): A7F04A5753EA280915EA6178D6467F23F94B11A1 ROOT_KEY_HASH( APE ): BA8710A7E1CD5A2909B9A875DB27AA2400000000 SYSTEM_ASIC_ID( RAP ): 000000010000022600010006400C192101011103 EM_ASIC_ID( RAP ): 00000295 EM_ASIC_ID( RAP ): 00000B21 PUBLIC_ID( RAP ): 0D900001CE4400580F39C32B9A2DC9F3F4C0A8B6 ASIC_MODE_ID( RAP ): 00 ROOT_KEY_HASH( RAP ): CAEEBB65D3C48E6DC73B49DC5063A2EE ROM_ID( RAP ): F2C6EBADC86E6189 --------------- Device ID Response: 3 blocks ------------- Storage Device: Owner Asic: RAP Type: NOR Flash Index: 0 Flash: Amd, 0001 0035 0000 6921 Storage Device Contents: Owner Asic: RAP 000000000000000000000000000000000000 ============= Set FBus mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

07-03-2007, 13:55	#11 (permalink)
hicvb7 No Life Poster Join Date: Apr 2007 Location: Algeria Posts: 965 Member: 483440 Status: Offline Thanks Meter: 191	i had the same problem but with N93 this is what i did: 1-flash only MCU 2-reconnect box 3-flash only PPM phone revive again just try this solution you have no think 2 lose !

07-16-2007, 23:17	#13 (permalink)
dvdaio No Life Poster Join Date: May 2006 Posts: 629 Member: 276432 Status: Offline Thanks Meter: 65	i want to know hot modfy the cable 10 pin to work with 8 pin please i want more details

07-17-2007, 13:49	#14 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	need to open adapter and solder wire to grey wire. this cable is TX2 line. on a cable for phone need put one more pin for a tx2 line and solder wire,then connect 2 wires

07-17-2007, 14:26	#15 (permalink)
dvdaio No Life Poster Join Date: May 2006 Posts: 629 Member: 276432 Status: Offline Thanks Meter: 65	can you explain to me with drawing a picture hot to mdify my adapter please