Siemens C62 unlock - FREE download here

[TELE-MEDIA]

Originally Posted by i_seeque

dear all,
I confirm : Logger n Decrypter works perfect.
Schematic is also partially perfect. Let me describe the way i unlocked.

Use a std. c55 data cable.
Short pin 3 & 5 AND 4 & 7 (as per schematic in zip file).
Now to apply external supply a minor difference from shematic.
Use a 10K resistor, connect it to pin9.
Connect 12v positive to this resistor.
Connect 12v Negative to GND pin of cable. ( a black wire normally connected already to it - pin2)

Start logger. Here comes the trick. Try the way, we do in sam flashing.
Little gamble here also. Phone may turn ON - try to off it. Try again. Dont loose your nerves. You gonna have success soon.

After all these decrypt the log. Enter the desired code. Check it with *#0606#.

Try n post your results and your IDEAS.
regards

Tell me please how can I run Log Decrypter on win 98se? Do I need any special dll or ocx files?
BR
ZG

[digitalmk]

I have 2 comp. 1 use winme 2 use win xp ,
work very fine in both comp, I dont instal dll or ocx files
my sugestion for unlock and programing use Winme final edition,, for me is the best

[TELE-MEDIA]

Thanks for your reply. I want to add that I could run this prog before on win98, but I had to format my hdd. Now it is impossible to run log decrypter. I think it's a problem of dll or ocx files missing. I can't install any other windows system than win98. Maybe someone else knows somthing more.
BR
ZG

[gazsy]

Power ON...
Phone..Ok
Boot...
Ok.
Sending loader
Ok.
Sending loader
Error: W:52 R:0
Ok.
Error: W:8 R:0
Error: W:1 R:0
Saving: .log
Done.
Failed!


PLS HELP

[dorinheimbach]

Hi freinds!
can anyone give me the language package file for flash progrom c62?
thanks a lot!
[email protected]

[Brka]

here at me ..

i used my old max232 interface ..
connected all pins like on included picture
not 4+7 and other bulls_hit ...
and i also connected voltage
but any from 5 to 12 V works

it reads log and at the end says failed
but log decrypter decrypt codes ok
and all worked ... for now.

b.r.
Alexandar.

[vule]

China cable x55 with 3-5 and 4-7 shorted pins and external power supply does not work for me... Old max 232 works perfect on 98SE, ME and XP

BR

Vule

[digitalmk]

china cable work 1%, I using only conector from china cable and max232 interface from me

[SJS]

But can you whrite wich cable is the best for making c62 cable! I know, many cables are china made! i try tomorrow with nokia cable!

[Ejaf]

Originally Posted by SJS

But can you whrite wich cable is the best for making c62 cable! I know, many cables are china made! i try tomorrow with nokia cable!

hI, ANYBODY hAVE UNLOCK SOLUTION, FREE, FOR C62 V.11, AND A60 V.10. because with zulea solution c62 doesn't make the log file, because when it's ask to turn on the phone, the phone makes really on, and tha soft doesn't start. To A60 with freia 9 tha boot file says bootfile not acepted. THanks

[Brka]

for all current versions of c62
log reading and code decrypting SW works 100%
check attached picture with c62 sw ...
take one charger for c55
and re-make it to c62 cable ...
use +5 to +12 volts at described pin
start logger and press power on
it must work
it worked for me at first try...

for a60 all versions ...
find freia9 and testpoint cutting pictures
open phone, cut the track
and unlock easily with freia9

b.r.
Alexandar.

[Stoyan]

that is right, and correct until now, may be next version will be more protected by Siemens and Ericsson
BR

[infogsm]

logger i sworking perfect but i can't start log decrypter ??
is it os compatibility problem ot what?
this is my log attached!

[infogsm]

sorry the log decrypter is working under win XP and my c62 is unlocked now!!
thanks to zulea!!

[TELE-MEDIA]

Originally Posted by infogsm

sorry the log decrypter is working under win XP and my c62 is unlocked now!!
thanks to zulea!!

I had a proble to run log decrypter under win98 but it was problem of NAV. When I uninstalled NAV everything is ok.
BR
ZG