Siemens C62 unlock - FREE download here - Page 7 - GSM-Forum

**Brka** · 12-15-2004, 16:39

simply flashing to v20 CANT work ...
you get dead phone ...

there is downgrading procedure,
and some files are required to do that
(all contained in original siemens flash programmer patcher)

after that ...
downgrade and upgrade easily

b.r.
Alexandar.

_THe_Laser · 12-15-2004, 17:53

Damn, f*ck you "brka gsm expert" - i have dead phone now, and no chance to repair it even with GT logger. Phone cannot goot at all anymore.
Stupid me, other phones easy unlocked with GT server, why the hell i must try idiotic tricks from this board . . .

**Brka** · 12-16-2004, 16:50

listen you little light beam ...

there's another thread in this forum ... about cracked Martech 7.9 and 8.0
you wont believe that it SW works too for x65 series ...
i also saw it with my own eyes.

the same for c62 ... i had exactly 3pcs of c62,
v26, and ALL THREE were succesfully downgraded
with ClearExitCounter.cus and modified flash programmer v2.83
all three pcs i read with logger and after upgrading to v26
entered codes i got from logs and all three
were succesfully unlocked ...

if you dunno what you're doing, dont blame others...

to get back your phone alive, simply reflash it back to v26
and it will be alive again ... so you can unlock it
with hammer if you want... i dont care.

and one more thing ... i dont like your attitude at all
with only 2 posts on the forum you cant phuck whoever you want
got it ?

b.r.
Alexandar.

GORAN_CRO · 12-16-2004, 18:12

Quote:

Originally Posted by Brka

listen you little light beam ...

there's another thread in this forum ... about cracked Martech 7.9 and 8.0
you wont believe that it SW works too for x65 series ...
i also saw it with my own eyes.

the same for c62 ... i had exactly 3pcs of c62,
v26, and ALL THREE were succesfully downgraded
with ClearExitCounter.cus and modified flash programmer v2.83
all three pcs i read with logger and after upgrading to v26
entered codes i got from logs and all three
were succesfully unlocked ...

if you dunno what you're doing, dont blame others...

to get back your phone alive, simply reflash it back to v26
and it will be alive again ... so you can unlock it
with hammer if you want... i dont care.

and one more thing ... i dont like your attitude at all
with only 2 posts on the forum you cant phuck whoever you want
got it ?

b.r.
Alexandar.

"ClearExitCounter.cus" from where i download this file ???
pls anybody send it for me and other people on this forum .... thx

sschn07 · 12-17-2004, 02:22

There are many characters in my "log" file . So I can not unlock my phone !
IMEI: 352464007225867
NCK Unlock: *#0000*7F4AC171#
Lock: *#0000*00000000#
NSCK Unlock: *#0004*00000000#
Lock: *#0004*00000000#
CCK Unlock: *#0002*009E172B#
Lock: *#0002*3E866513#
SPCK Unlock: *#0001*00000000#
Lock: *#0001*00000000#
SIM Unlock: *#0005*86651348#
Lock: *#0005*65134890#
Please close and restart
software for next LOG file!
How can I do now !!!!!!!!!!!!!!! Help !!!!!! Thanks !

**Brka** · 12-17-2004, 16:43

which version is in your phone now ?

if v26 ... you cant unlock ..

downgrade to v20 and read codes, if stilll "^1EF&^#" characters ..
write good gdfs file and read again ... must work

b.r.
Alexandar.

blaiseid · 12-17-2004, 17:21

Quote:

Originally Posted by sschn07

There are many characters in my "log" file . So I can not unlock my phone !
IMEI: 352464007225867
NCK Unlock: *#0000*7F4AC171#
Lock: *#0000*00000000#
NSCK Unlock: *#0004*00000000#
Lock: *#0004*00000000#
CCK Unlock: *#0002*009E172B#
Lock: *#0002*3E866513#
SPCK Unlock: *#0001*00000000#
Lock: *#0001*00000000#
SIM Unlock: *#0005*86651348#
Lock: *#0005*65134890#
Please close and restart
software for next LOG file!
How can I do now !!!!!!!!!!!!!!! Help !!!!!! Thanks !

This comes most of time after using a wrong cable.The Logger didnt finish or didnt create the log correctly.Try to use an original cable or make a good cable .

Good luck.

_THe_Laser · 12-17-2004, 23:28

Listen you dumb a.ss, i talk here about V28, not about my post counter.
You mislead people here, and talk bullshi.ts only.

Moron !

Quote:

Originally Posted by Brka

listen you little light beam ...

there's another thread in this forum ... about cracked Martech 7.9 and 8.0
you wont believe that it SW works too for x65 series ...
i also saw it with my own eyes.

the same for c62 ... i had exactly 3pcs of c62,
v26, and ALL THREE were succesfully downgraded
with ClearExitCounter.cus and modified flash programmer v2.83
all three pcs i read with logger and after upgrading to v26
entered codes i got from logs and all three
were succesfully unlocked ...

if you dunno what you're doing, dont blame others...

to get back your phone alive, simply reflash it back to v26
and it will be alive again ... so you can unlock it
with hammer if you want... i dont care.

and one more thing ... i dont like your attitude at all
with only 2 posts on the forum you cant phuck whoever you want
got it ?

b.r.
Alexandar.

*A*S*H* · 12-18-2004, 05:21

can someone put a new link to the c62 unlocker. (other link is dead) many thanks.

Macko GSM · 12-18-2004, 06:43

He he, I took that file from our friend(u know wh,Vl...) and succesfully unlocked 2 pcs of c62 v28,Big thanks for info...
Btw, come over and visit us in Belgrade
Regards Macko

Macko GSM · 12-18-2004, 06:52

@ALL
if you read log from c62 version over v20 u will get letters instead of of numbers.
Brka's method works fine.
Bigg thnks to Aleksandar
Macko

*A*S*H* · 12-20-2004, 20:16

someone please email me the software! [email protected]

MANY THANKS.

Keni · 12-23-2004, 00:45

Quote:

Originally Posted by Brka

which version is in your phone now ?

if v26 ... you cant unlock ..

downgrade to v20 and read codes, if stilll "^1EF&^#" characters ..
write good gdfs file and read again ... must work

b.r.
Alexandar.

Hi Alexandar!

This solution doesn't work , but I dont know why.
Which type of gdfs is good?
I tryed v20 and 2 var. custum gdfs, and the log file was same.
Thanks in advance

BR Keni

**Brka** · 12-23-2004, 15:37

@Macko ....
Of course it works, just need to use your head, not like the
people in this thread, and newbie __the_laser with 3 posts ... and
telling that it dont work

@All the rest (specially to "the_little_laser")
Solution WORKS .... all you need to do is a little experminting
and you will find out that it WORKS ...
reported and tested since now by a lot of CLEVER people

all i wrote here, i also told them, gave the files
and they succeeded unlocking v26 and v28

what do you want more ?
to write you exact procedure, and step by step ?
well ... maybe for next christmas ...
if you are so dumb, PAY for griffin c62 logs
and no need to use your brain ...

all of this is reported to work by many people, and really works 100%

I WILL NOT post files here, if you need help, PM me,
and you will get what u need.
and STOP posting that it DONT work ... coz it work

b.r.
ALexandar.

chafeh Richarch · 12-24-2004, 14:13

Hi bro I'm badly in need of this solution mine is v25.

Thx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
FREE software for ALL Siemens WITHOUT Test Point - Download Here!!!	mobilephonesgro	Siemens-Benq RingTones and WallPapers	328	03-30-2006 21:38
ksie21 supported x55 and other siemens free download here.pls test this	rw21914	E-Gold Based Phones	2	06-06-2003 07:10

12-15-2004, 16:39	#91 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,275 Member: 163 Status: Offline Thanks Meter: 7,869	simply flashing to v20 CANT work ... you get dead phone ... there is downgrading procedure, and some files are required to do that (all contained in original siemens flash programmer patcher) after that ... downgrade and upgrade easily b.r. Alexandar.

12-15-2004, 17:53	#92 (permalink)
_THe_Laser Junior Member Join Date: Dec 2004 Posts: 29 Member: 97633 Status: Offline Thanks Meter: 0	Damn, f*ck you "brka gsm expert" - i have dead phone now, and no chance to repair it even with GT logger. Phone cannot goot at all anymore. Stupid me, other phones easy unlocked with GT server, why the hell i must try idiotic tricks from this board . . .

12-16-2004, 16:50	#93 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,275 Member: 163 Status: Offline Thanks Meter: 7,869	listen you little light beam ... there's another thread in this forum ... about cracked Martech 7.9 and 8.0 you wont believe that it SW works too for x65 series ... i also saw it with my own eyes. the same for c62 ... i had exactly 3pcs of c62, v26, and ALL THREE were succesfully downgraded with ClearExitCounter.cus and modified flash programmer v2.83 all three pcs i read with logger and after upgrading to v26 entered codes i got from logs and all three were succesfully unlocked ... if you dunno what you're doing, dont blame others... to get back your phone alive, simply reflash it back to v26 and it will be alive again ... so you can unlock it with hammer if you want... i dont care. and one more thing ... i dont like your attitude at all with only 2 posts on the forum you cant phuck whoever you want got it ? b.r. Alexandar.

12-17-2004, 02:22	#95 (permalink)
sschn07 Insane Poster Join Date: Jul 2004 Age: 46 Posts: 64 Member: 72161 Status: Offline Thanks Meter: 2	There are many characters in my "log" file . So I can not unlock my phone ! IMEI: 352464007225867 NCK Unlock: #00007F4AC171# Lock: #000000000000# NSCK Unlock: #000400000000# Lock: #000400000000# CCK Unlock: #0002009E172B# Lock: #00023E866513# SPCK Unlock: #000100000000# Lock: #000100000000# SIM Unlock: #000586651348# Lock: #000565134890# Please close and restart software for next LOG file! How can I do now !!!!!!!!!!!!!!! Help !!!!!! Thanks !

12-17-2004, 16:43	#96 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,275 Member: 163 Status: Offline Thanks Meter: 7,869	which version is in your phone now ? if v26 ... you cant unlock .. downgrade to v20 and read codes, if stilll "^1EF&^#" characters .. write good gdfs file and read again ... must work b.r. Alexandar.

12-18-2004, 05:21	#99 (permalink)
ASH Freak Poster Join Date: Mar 2004 Age: 45 Posts: 126 Member: 60098 Status: Offline Thanks Meter: 0	can someone put a new link to the c62 unlocker. (other link is dead) many thanks.

12-18-2004, 06:43	#100 (permalink)
Macko GSM Insane Poster Join Date: Mar 2004 Location: Zemun,Serbia Age: 43 Posts: 95 Member: 59969 Status: Offline Thanks Meter: 13	He he, I took that file from our friend(u know wh,Vl...) and succesfully unlocked 2 pcs of c62 v28,Big thanks for info... Btw, come over and visit us in Belgrade Regards Macko

12-18-2004, 06:52	#101 (permalink)
Macko GSM Insane Poster Join Date: Mar 2004 Location: Zemun,Serbia Age: 43 Posts: 95 Member: 59969 Status: Offline Thanks Meter: 13	@ALL if you read log from c62 version over v20 u will get letters instead of of numbers. Brka's method works fine. Bigg thnks to Aleksandar Macko

12-20-2004, 20:16	#102 (permalink)
ASH Freak Poster Join Date: Mar 2004 Age: 45 Posts: 126 Member: 60098 Status: Offline Thanks Meter: 0	someone please email me the software! [email protected] MANY THANKS.

12-23-2004, 15:37	#104 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,275 Member: 163 Status: Offline Thanks Meter: 7,869	@Macko .... Of course it works, just need to use your head, not like the people in this thread, and newbie __the_laser with 3 posts ... and telling that it dont work @All the rest (specially to "the_little_laser") Solution WORKS .... all you need to do is a little experminting and you will find out that it WORKS ... reported and tested since now by a lot of CLEVER people all i wrote here, i also told them, gave the files and they succeeded unlocking v26 and v28 what do you want more ? to write you exact procedure, and step by step ? well ... maybe for next christmas ... if you are so dumb, PAY for griffin c62 logs and no need to use your brain ... all of this is reported to work by many people, and really works 100% I WILL NOT post files here, if you need help, PM me, and you will get what u need. and STOP posting that it DONT work ... coz it work b.r. ALexandar.

12-24-2004, 14:13	#105 (permalink)
chafeh Richarch Freak Poster Join Date: Jul 2003 Posts: 131 Member: 33488 Status: Offline Thanks Meter: 10	Hi bro I'm badly in need of this solution mine is v25. Thx