Eeprom uploader for Siemens S35
 

Hi!
Does anyone have some eeprom uploader for Siemens S35 and eeprom for this in a file? I have Ziemens workshop 1.22 but it don't works with my phone :( I heard that the eeprom uploader for dos is somewhere in the net for free but i don't know where i can i find it :( Can You help me please?

Best regards.

Ziemens Workshop is 101% working !
I have repaired a lot of S35 with it

You only need S35 repair flash in *.bin format

I've already tried to repair it with Ziemens workshop, i've repaired couple of phones with it, but not this time :( I have repair bin for S35, but it's useless until Ziemens workshop didn't see the phone! Any ideas?

Best regards.

You must choose "S35" and "1.09EG" than it must work. Have you done it ?

Yes, i choose it, i know how to play with workshop, it doesn't see the phone!!! Swup programs doesn't see the phone too.

Do you have good charged batery? If your phone doesn`t response, so you must have empty batery !
Or try to restart your PC or try another cable or another PC

I've tried everything, 3 different cables, 3 different PCs, baterry is full, trying removing battery etc. This phone is behaving very strange, when i press power on button to give a sign to program that phone is connected and ready phone lights up for 1 second and turns off. It should lights up not till then after pressing and hold power on button for 1 second, and when i press it for short time nothing should happen but it lights up!!!
I don't have a clue why!

Sorry for my English :)

Best regards.

Try to only CLICK on "power ON" button. DO NOT PUSH THE BUTTON FOR LONG TIME !!! You must only click ! It should be 1ms NOT 1s !!! Only TOUCH the button ;) ;) ;) :D :D

!!!! YOU MUST BE QUICK !!!!

I know that i must click on it!!! I wrote about it. When i click on the power button phone lights up for 1 second and nothing happens.

Best regards.

Yes, you must click on power button, but not for LONG time !!! You must click very SHORT !

If you click on the button for LONG time, you will try to POWER the phone and that can`t help you. You must give only signal to the software ...

ONLY CLICK, do not PUSH IT FOR LONG TIME !

Also try comunication with another sw (Martech, SWUP etc.)

I know i must click for short time not hold it, just click :mad: :mad: :mad:

I already tried communicate phone with all softs (Martech, Swup, Workshop etc.)

Din, what type of cable do you have? Did you build it or buy one from those mass produced? Did it have auto ignition?

Best regards.

I haven`t cable with autoignition. I have universal cable build on my own.

How the phone works with Martech and another sw ?

HI!
Martech and other soft i have doesn't see the phone too :(

Regards

Where i can download Siemens S35 repair bin ?
Thanks.

hii..

i have same problem a long time ago with my s35...(program no response when we "clik" key "ON")

try with swup (under dos) OR if doesn't response too

u may need second way

with martech flash phone with reapairs35.bin WITHOUT BATTERY when martech say "POWER ON", PLUGIN YOUR BATTERY
with this way, martech will response without "power on"


sory bad engglish,

csm35 tools
 

to chawek:

already sent to your e-mail,you can download and upload cms35
eeprom and flashing.

I can ,100%work
 

I can doit with Ziemens x3x workshop 1.22, 100%work

If not succesfully You can do it, with Winsup32wi and *xbi\*.bin flies, Iam sure you will be successsssssssssssss
(you want my Good Methode (step by step) ),

if you interest, mail me...........
sorry for english