Fujitsu Siemens T830 unlock ? - GSM-Forum

Patrick · 05-01-2007, 20:50

Sorry if wrong Siemens section

Any solution to unlock this phone?

BR's

Patrick

http://www.expansys.com/p.aspx?i=130765

dagos · 05-02-2007, 04:58

Quote:

Originally Posted by phonexpo

Sorry if wrong Siemens section

Any solution to unlock this phone?

BR's

Patrick

http://www.expansys.com/p.aspx?i=130765

Hi,
-Try to press the enter button (the lowest right button) for a longer time, this should unlock your device.
-Do you have FSC Keylock enabled? (Start / Settings / System / Buttons / FSC Keylock (tab). If so, disable this help.
-Do you enable PIN code in your sim card?
If yes, maybe you could disable PIN code in other phone and put it back to try.
-T830 is for GSM(2G)/UMTS(3G) service. What is type of your SIM?
-Turn out the phone has a geographical lock, presumably only functions with UK Sim cards

Br,
dagos

Patrick · 05-02-2007, 09:46

Just bought the FS T830 from ebay and when inserting SIM [vodafone] it gives message "Warning. New SIM detected. please input phone code or change SIM card". The code needs to be between 4-8 numbers [ie no letters or symbols].

I have tried it with vodafone, t-mobile and o2 sims and get same message each time.

I do not know if this code is a network unlocking code or a 'user pin' from the previous owner [awaiting response from him] but would really appreciate your help.

dagos · 05-02-2007, 20:20

Quote:

Originally Posted by phonexpo

Just bought the FS T830 from ebay and when inserting SIM [vodafone] it gives message "Warning. New SIM detected. please input phone code or change SIM card". The code needs to be between 4-8 numbers [ie no letters or symbols].

I have tried it with vodafone, t-mobile and o2 sims and get same message each time.

I do not know if this code is a network unlocking code or a 'user pin' from the previous owner [awaiting response from him] but would really appreciate your help.

..tomorow I will try to contact "somme persons" regarding your problem and if I have the solution(s), you receive it... via PM.
Br,
dagos

Patrick · 05-02-2007, 22:59

Thank you very much dagos

BR's

Patrick

josp · 08-06-2007, 21:19

Hello!

Sorry to bother you, but I found your problem her. I have a Fujitsu Siemens Pocket Loox T830 and have got a new SIM card. I have changed it before but then it was ok. Now it demands a "Phone code". I have searched the internet and found you, trying to solve the problem. Can You give me a hint so I can be "back in business”?

Thank you so much!

Johnny Spernes
Norway
E-mail: [email protected]

vericol · 10-27-2007, 12:48

Hi,
I too have a problem with the phone code of T830. The guy who sold me the device doesn't remember the code, the Siemens Help Center gave me the original Code, but with no result because it was changed and the previous owner doesn' remember it! I hace seen that some of you had the same problem in the past, how did you find a solution?
Thank You.
vericol from Florence/Italy

Minnoat · 12-02-2007, 19:01

hi, there is the same problem with my T830, please if you can, help me
[email protected]

mirciu · 12-23-2007, 02:49

Did anybody tried a "factory reset"?
Turn off the phone, remove the back cover and next to the red battery holder there is a white reset button. Press that while the phone is being turned on until you see a menu >> select "Factory reset" - let the phone re-boot and check if that solved your problem.
Good luck!

lincolnlinks · 05-23-2008, 11:23

please i want to change my T830 language to english.

lincolnlinks · 05-23-2008, 15:26

I have a Fujitsu Siemens Pocket Loox T830 in a french language, can anybody tell me how to change it to english

Nestor7 · 05-26-2008, 22:48

any solutions for this device? I try to unlock, but not sucess

EVRENTY · 01-08-2009, 18:19

Quote:

Originally Posted by lincolnlinks

please i want to change my T830 language to english.

Visit http:\\support.fujitsu-siemens. there ar a lot of images of flash, so just choose english..

EVRENTY · 01-08-2009, 18:22

long story.. so the phone code have to be unlocked, but how to do it, pls help..

EVRENTY · 01-11-2009, 20:37

Quote:

Originally Posted by phonexpo

Just bought the FS T830 from ebay and when inserting SIM [vodafone] it gives message "Warning. New SIM detected. please input phone code or change SIM card". The code needs to be between 4-8 numbers [ie no letters or symbols].

I have tried it with vodafone, t-mobile and o2 sims and get same message each time.

I do not know if this code is a network unlocking code or a 'user pin' from the previous owner [awaiting response from him] but would really appreciate your help.

Sirs, I have the same problem as U had before. How did you solve it? Please advise..
New SIM Detected Please Input Phone Code or Change SIM Card

05-01-2007, 20:50	#1 (permalink)
Patrick No Life Poster Join Date: Dec 2004 Location: Dublin Age: 44 Posts: 1,512 Member: 100436 Status: Offline Thanks Meter: 57	Fujitsu Siemens T830 unlock ? Sorry if wrong Siemens section Any solution to unlock this phone? BR's Patrick http://www.expansys.com/p.aspx?i=130765

01-08-2009, 18:22	#14 (permalink)
EVRENTY Junior Member Join Date: Jan 2009 Posts: 3 Member: 942462 Status: Offline Sonork: BKR Thanks Meter: 0	same issue long story.. so the phone code have to be unlocked, but how to do it, pls help..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to Fujitsu Siemens T830 unlock	turkcellgsm	HTC & Smartphones ( WM Without Touch)	2	01-22-2010 20:02
Fujitsu Siemens Pocket LOOX T830 Unlock code need	DemnZ	Phone Unlocking Codes & Maps	0	09-08-2009 16:59
Fujitsu Siemens pocket loox T830	moji_baba	Siemens Hardware Repair Area	3	06-24-2008 09:07
Fujitsu Siemens T830 unlock ?	Patrick	JAFWM	0	05-02-2007 00:15
fujitsu siemens boot passwd ?	MaTeOoSh	Off Topic Zone	3	01-13-2004 08:45

05-02-2007, 09:46	#3 (permalink)
Patrick No Life Poster Join Date: Dec 2004 Location: Dublin Age: 44 Posts: 1,512 Member: 100436 Status: Offline Thanks Meter: 57	Just bought the FS T830 from ebay and when inserting SIM [vodafone] it gives message "Warning. New SIM detected. please input phone code or change SIM card". The code needs to be between 4-8 numbers [ie no letters or symbols]. I have tried it with vodafone, t-mobile and o2 sims and get same message each time. I do not know if this code is a network unlocking code or a 'user pin' from the previous owner [awaiting response from him] but would really appreciate your help.

05-02-2007, 22:59	#5 (permalink)
Patrick No Life Poster Join Date: Dec 2004 Location: Dublin Age: 44 Posts: 1,512 Member: 100436 Status: Offline Thanks Meter: 57	Thank you very much dagos BR's Patrick

08-06-2007, 21:19	#6 (permalink)
josp Junior Member Join Date: Aug 2007 Location: Norway Posts: 1 Member: 559566 Status: Offline Thanks Meter: 0	Hello! Sorry to bother you, but I found your problem her. I have a Fujitsu Siemens Pocket Loox T830 and have got a new SIM card. I have changed it before but then it was ok. Now it demands a "Phone code". I have searched the internet and found you, trying to solve the problem. Can You give me a hint so I can be "back in business”? Thank you so much! Johnny Spernes Norway E-mail: [email protected]

10-27-2007, 12:48	#7 (permalink)
vericol Junior Member Join Date: Oct 2007 Posts: 1 Member: 617758 Status: Offline Thanks Meter: 0	Hi, I too have a problem with the phone code of T830. The guy who sold me the device doesn't remember the code, the Siemens Help Center gave me the original Code, but with no result because it was changed and the previous owner doesn' remember it! I hace seen that some of you had the same problem in the past, how did you find a solution? Thank You. vericol from Florence/Italy

12-02-2007, 19:01	#8 (permalink)
Minnoat Junior Member Join Date: Dec 2007 Posts: 1 Member: 642881 Status: Offline Thanks Meter: 0	hi, there is the same problem with my T830, please if you can, help me [email protected]

12-23-2007, 02:49	#9 (permalink)
mirciu Junior Member Join Date: Dec 2007 Posts: 3 Member: 654861 Status: Offline Thanks Meter: 0	Did anybody tried a "factory reset"? Turn off the phone, remove the back cover and next to the red battery holder there is a white reset button. Press that while the phone is being turned on until you see a menu >> select "Factory reset" - let the phone re-boot and check if that solved your problem. Good luck!

05-23-2008, 11:23	#10 (permalink)
lincolnlinks Freak Poster Join Date: Apr 2007 Location: nigeria Posts: 240 Member: 487753 Status: Offline Thanks Meter: 4	please i want to change my T830 language to english.

05-23-2008, 15:26	#11 (permalink)
lincolnlinks Freak Poster Join Date: Apr 2007 Location: nigeria Posts: 240 Member: 487753 Status: Offline Thanks Meter: 4	I have a Fujitsu Siemens Pocket Loox T830 in a french language, can anybody tell me how to change it to english

05-26-2008, 22:48	#12 (permalink)
Nestor7 Freak Poster Join Date: Oct 2003 Location: noahabahama Age: 44 Posts: 218 Member: 41229 Status: Offline Thanks Meter: 24	any solutions for this device? I try to unlock, but not sucess