how to know the original ver. of v25 ? - GSM-Forum

makona · 01-01-2001, 05:46

today i got c25 v10 "wrong sw" i tried to use andromeda ver 6.00 " it read phone ok but when pressing repair it says DONE v.fast and PHONE NOT RESPONDING ...
so i tried bartek 1.92 somtimes not connect and somtimes connect ... its ok enter service mode and

))))))))))) too many times then phone worked but with " PHONE CODE " .. i tried via bartek .. can't read phone again ..

tried andromeda ok phone code removed ..
then i got NETOWRK KEY .. !!!!
removed by andromeda ..
phone worked without network ...
i think itsnt ver 10 ??
my q. if i the phone flashed before by total flasher with this ver when it another ver ... andromeda won't tell me the originall version of flash or the flashed ver???
p.s : c25 tool says " not support this version yet " .. when it reads untill 53 ..
so ??
any help ...
thnx

chris_ua · 01-11-2001, 18:37

Hi!

I've had something similar with a phone v46.
Try to get a phone with ver close to your (in my case it was a ver 49), download flash with totalflasher, upload to yours, repair by Bartek 1.92 and all should be OK, except IMEI, but AFAIK you can change it by all25.

ARS · 01-12-2001, 07:27

For Andromeda soft you need special cable, with auto ignition. look at www.andromeda.home.pl
If you use standart cable, phone has no network.

01-01-2001, 05:46	#1 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	how to know the original ver. of v25 ? today i got c25 v10 "wrong sw" i tried to use andromeda ver 6.00 " it read phone ok but when pressing repair it says DONE v.fast and PHONE NOT RESPONDING ... so i tried bartek 1.92 somtimes not connect and somtimes connect ... its ok enter service mode and ))))))))))) too many times then phone worked but with " PHONE CODE " .. i tried via bartek .. can't read phone again .. tried andromeda ok phone code removed .. then i got NETOWRK KEY .. !!!! removed by andromeda .. phone worked without network ... i think itsnt ver 10 ?? my q. if i the phone flashed before by total flasher with this ver when it another ver ... andromeda won't tell me the originall version of flash or the flashed ver??? p.s : c25 tool says " not support this version yet " .. when it reads untill 53 .. so ?? any help ... thnx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
help.. how to know the original china phone firmware	MARK26	Infinity-Box	5	03-20-2010 10:26
how to know the card id of a Cruiser-06 dongle ?	gsmsikar	Cruiser Suite	1	11-12-2008 11:29
How to know the FW version of phone	Warluck02	UST Pro II	1	09-30-2008 08:11
how to know the flash file of china phone?	david_aguirre	Infinity-Box	4	09-18-2008 07:49
how to know the flash files of dead phones	sanjubhai	Chinese Models & Cloned Phones	4	05-08-2008 09:03

01-11-2001, 18:37	#2 (permalink)
chris_ua Freak Poster Join Date: Jan 2001 Location: Uzhgorod, Ukraine Age: 48 Posts: 305 Member: 3023 Status: Offline Thanks Meter: 1	Hi! I've had something similar with a phone v46. Try to get a phone with ver close to your (in my case it was a ver 49), download flash with totalflasher, upload to yours, repair by Bartek 1.92 and all should be OK, except IMEI, but AFAIK you can change it by all25.

01-12-2001, 07:27	#3 (permalink)
ARS No Life Poster Join Date: Dec 2000 Location: Slovakia, Brezno Posts: 980 Member: 2721 Status: Offline Thanks Meter: 23	For Andromeda soft you need special cable, with auto ignition. look at www.andromeda.home.pl If you use standart cable, phone has no network.