Battery problem!! - GSM-Forum

pedjulino · 09-19-2002, 01:06

Dear friends i need blk file for sensor tool version software v2501 please help me for this file
and send me on mail [email protected]
I now can't calibration my battery!

thanx for all help

regards

Pauk · 09-19-2002, 06:47

Hi - you should try this .blk file: c35_v18_3,75V.blk

I have C35 fw24 with 800mAh LiOn and it works quite good (not perfect)

snk · 09-19-2002, 10:21

Hi !
best to use file c35_v18_3,95V.blk or c35_v18_3,92V.blk.
My S35 (with original Li-Ion battery 600mAh) work 4-5 days.

ken · 09-19-2002, 11:16

For Li-ion, the value is difference from Ni-mh. SpgY03V is higher than Ni-mh.
My favourite value for C35 Li-ion is
SpgY03V = 7450
SpgX0 = 4225
SpgY04V = 2668
For Ni-mh batt you can use .blk file in prog, test and choose the best one.
Don't ask me how to calculate this value, because I did it by trial and error way.
At last : Sw version is no matter with this value.(in my experience)

prp · 09-20-2002, 18:07

Why don't you use initmap.It will write you the correct settings?

pedjulino · 09-20-2002, 20:17

Dear my friend can U send me initmap please?
mail [email protected]

regards

Marko. · 09-20-2002, 23:09

Hm, upload InitMap somewhere...

prp · 09-21-2002, 20:17

Look at old topics in software section.If you use initmap you have first to downgrade to fw05. Good luck

Marko. · 09-23-2002, 04:07

Btw. i can't find any valid link for download Initmap 1.29. I don't need 1.30 because i haven't hardlock.

Please...upload it somewhere ...

09-19-2002, 01:06	#1 (permalink)
pedjulino Freak Poster Join Date: May 2002 Location: - Age: 45 Posts: 417 Member: 11468 Status: Offline Thanks Meter: 4	Battery problem!! Dear friends i need blk file for sensor tool version software v2501 please help me for this file and send me on mail [email protected] I now can't calibration my battery! thanx for all help regards

09-19-2002, 11:16	#4 (permalink)
ken Freak Poster Join Date: Jul 2001 Location: Thailand Posts: 188 Member: 5472 Status: Offline Thanks Meter: 0	For Li-ion, the value is difference from Ni-mh. SpgY03V is higher than Ni-mh. My favourite value for C35 Li-ion is SpgY03V = 7450 SpgX0 = 4225 SpgY04V = 2668 For Ni-mh batt you can use .blk file in prog, test and choose the best one. Don't ask me how to calculate this value, because I did it by trial and error way. At last : Sw version is no matter with this value.(in my experience) Last edited by ken; 09-19-2002 at 11:19.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T28 with new battery problem	hroch	Old Ericsson Phones & Sony Phones	0	02-26-2002 10:32
T28 battery problems	Tigerente	Old Ericsson Phones & Sony Phones	0	02-04-2002 18:14
Battery Problem	Moc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-28-2001 11:18
T28s battery problem	paulino	Old Ericsson Phones & Sony Phones	0	09-21-2001 11:40
GD52 After unblocking battery problem	Piva	Panasonic	1	07-07-2001 16:03

09-19-2002, 06:47	#2 (permalink)
Pauk Junior Member Join Date: Sep 2002 Location: Brno - Czech Age: 47 Posts: 4 Member: 15583 Status: Offline Thanks Meter: 0	Hi - you should try this .blk file: c35_v18_3,75V.blk I have C35 fw24 with 800mAh LiOn and it works quite good (not perfect)

09-19-2002, 10:21	#3 (permalink)
snk Freak Poster Join Date: Jul 2001 Location: Ukraine Posts: 178 Member: 5150 Status: Offline Thanks Meter: 1	Hi ! best to use file c35_v18_3,95V.blk or c35_v18_3,92V.blk. My S35 (with original Li-Ion battery 600mAh) work 4-5 days.

09-20-2002, 18:07	#5 (permalink)
prp Freak Poster Join Date: Jan 2002 Location: Bulgaria Age: 44 Posts: 161 Member: 8627 Status: Offline Thanks Meter: 4	Why don't you use initmap.It will write you the correct settings?

09-20-2002, 20:17	#6 (permalink)
pedjulino Freak Poster Join Date: May 2002 Location: - Age: 45 Posts: 417 Member: 11468 Status: Offline Thanks Meter: 4	Dear my friend can U send me initmap please? mail [email protected] regards

09-20-2002, 23:09	#7 (permalink)
Marko. Junior Member Join Date: Sep 2002 Location: Croatia Posts: 31 Member: 15636 Status: Offline Thanks Meter: 0	Hm, upload InitMap somewhere...

09-21-2002, 20:17	#8 (permalink)
prp Freak Poster Join Date: Jan 2002 Location: Bulgaria Age: 44 Posts: 161 Member: 8627 Status: Offline Thanks Meter: 4	Look at old topics in software section.If you use initmap you have first to downgrade to fw05. Good luck

09-23-2002, 04:07	#9 (permalink)
Marko. Junior Member Join Date: Sep 2002 Location: Croatia Posts: 31 Member: 15636 Status: Offline Thanks Meter: 0	Btw. i can't find any valid link for download Initmap 1.29. I don't need 1.30 because i haven't hardlock. Please...upload it somewhere ...