S35 v21 - Invalid SIM! NETWORK-LOCK - GSM-Forum

dimka · 03-04-2002, 00:48

I didn't see any prog, that can sp-unlock this version

Tried to unlock by code - *#0000*<my_code_8_digits># - phone says "Network Lock deleted" and after this it turns off...
Then, it turns on only after CEE_Repair

Tried to downgrade soft - phone didn't turn on at all!

Is there any solution for v21?

djdunlock · 03-04-2002, 13:13

Its easy, just use c,s,m35 MAP and you'll get all 5 codes for unlock your phone.
Soft is here , i mean, and password is www.chavalgsm.com, when you've got codes, just use suitable for network (i mean that's *#0000*xxxxxxxx# and phone is unlocked, x... is your obtained code).
In case that link doesn't work, try this web.

BTW, it doesn't matter which fw. you have in phone.

dimka · 03-04-2002, 23:04

I'm already tried to do this, but after I enter *#0000*xxxxxxxx# phone says - Network Lock deleted succesfully! and after that it shuts down... forever

Until I press CEE_Repair in Ziemens Workshop

mujie · 03-05-2002, 20:54

ZEE SIEMENS G3 IS YOUR ANSWER, IT WORKS 100% ON MY S35 V21, ALREADY DID 5.

HFP · 03-06-2002, 03:29

Yes..this one problem of downgraded siemens...U need flash phone and make CEE_repair...after that write 2 phone map FILE...
WBR.
Peter

dimka · 03-06-2002, 23:28

Pnone is working, thanx to all!
But...
I can't write map file

When I try to write it - phone starts flashing and "writing imei" loops forever

I wait 2 minutes!!! and then deattached battery. IMEI is still 099999-00-123456-1 (after CEE Repair).

TriMesh · 03-07-2002, 00:24

As you have noticed, you can't unlock a phone that's been fixed with Ziemens CEE_Repair using the keypad. This is due to the fact that one of the blocks that it writes isn't calculated correctly, and gets corrupted when the phone tries to recalculate it after accepting the keyboard unlock code.

The problem with the logger not working is related to either your cable, or your serial port - some setups just don't seem to like Maxim's logger, and refuse to work. On my laptop, the older version of the program works fine, but 3.0 doesn't

I would recommend using the version of ZeeSiemensG3 modifed by Lead, that allows you to specify the IMEI to write to the phone. This will correct your IMEI, unlock the phone, and write a correct map, all in one. It will also, in my experience, work fine with just about every cable/serial port combination in existence.

Regards,

Pete

03-04-2002, 00:48	#1 (permalink)
dimka Freak Poster Join Date: Nov 2001 Location: Omsk, Russia Age: 41 Posts: 121 Member: 7337 Status: Offline Thanks Meter: 0	S35 v21 - Invalid SIM! NETWORK-LOCK I didn't see any prog, that can sp-unlock this version Tried to unlock by code - #0000<my_code_8_digits># - phone says "Network Lock deleted" and after this it turns off... Then, it turns on only after CEE_Repair Tried to downgrade soft - phone didn't turn on at all! Is there any solution for v21?

03-04-2002, 13:13	#2 (permalink)
djdunlock No Life Poster Join Date: Jul 2001 Location: East Europe Age: 54 Posts: 918 Member: 5452 Status: Offline Thanks Meter: 1	Its easy, just use c,s,m35 MAP and you'll get all 5 codes for unlock your phone. Soft is here , i mean, and password is www.chavalgsm.com, when you've got codes, just use suitable for network (i mean that's #0000xxxxxxxx# and phone is unlocked, x... is your obtained code). In case that link doesn't work, try this web. BTW, it doesn't matter which fw. you have in phone. Last edited by djdunlock; 03-04-2002 at 13:24.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nec n410i Invalid simlock, network lock!!!!!	kaino147	Redbox	1	09-11-2007 17:51
CF62T SIM Network lock?	CosmoK	S-Gold Based Phones	1	12-22-2004 22:31
S35 V21	Neo's	x1x to x45/x50	0	12-03-2001 17:21
S35 v21 LP4???	gsmonline	x1x to x45/x50	1	11-08-2001 14:27
S35 v21 and LI-IO bat ?	masterross	x1x to x45/x50	5	10-21-2001 21:45

03-04-2002, 23:04	#3 (permalink)
dimka Freak Poster Join Date: Nov 2001 Location: Omsk, Russia Age: 41 Posts: 121 Member: 7337 Status: Offline Thanks Meter: 0	I'm already tried to do this, but after I enter #0000xxxxxxxx# phone says - Network Lock deleted succesfully! and after that it shuts down... forever Until I press CEE_Repair in Ziemens Workshop

03-05-2002, 20:54	#4 (permalink)
mujie No Life Poster Join Date: Jan 2002 Location: MARS Posts: 1,661 Member: 8304 Status: Offline Thanks Meter: 362	ZEE SIEMENS G3 IS YOUR ANSWER, IT WORKS 100% ON MY S35 V21, ALREADY DID 5.

03-06-2002, 03:29	#5 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 48 Posts: 1,605 Member: 3529 Status: Offline Thanks Meter: 1	Yes..this one problem of downgraded siemens...U need flash phone and make CEE_repair...after that write 2 phone map FILE... WBR. Peter

03-06-2002, 23:28	#6 (permalink)
dimka Freak Poster Join Date: Nov 2001 Location: Omsk, Russia Age: 41 Posts: 121 Member: 7337 Status: Offline Thanks Meter: 0	Pnone is working, thanx to all! But... I can't write map file When I try to write it - phone starts flashing and "writing imei" loops forever I wait 2 minutes!!! and then deattached battery. IMEI is still 099999-00-123456-1 (after CEE Repair).

03-07-2002, 00:24	#7 (permalink)
TriMesh Freak Poster Join Date: Dec 2001 Location: Shenzhen, China Posts: 327 Member: 7911 Status: Offline Thanks Meter: 7	As you have noticed, you can't unlock a phone that's been fixed with Ziemens CEE_Repair using the keypad. This is due to the fact that one of the blocks that it writes isn't calculated correctly, and gets corrupted when the phone tries to recalculate it after accepting the keyboard unlock code. The problem with the logger not working is related to either your cable, or your serial port - some setups just don't seem to like Maxim's logger, and refuse to work. On my laptop, the older version of the program works fine, but 3.0 doesn't I would recommend using the version of ZeeSiemensG3 modifed by Lead, that allows you to specify the IMEI to write to the phone. This will correct your IMEI, unlock the phone, and write a correct map, all in one. It will also, in my experience, work fine with just about every cable/serial port combination in existence. Regards, Pete