A70 and A57 dead after cut test point - GSM-Forum

baleso · 02-19-2006, 20:45

Pleaaaase help me

my A70 dead after i cut the TP. The dead phone can communicate with Jocker and i can calculate Skey but can´t send Skey. When i push "Send Skey" Jocker ver 0.3.4.3 say:

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: D500 08 0000

pleas how can i repair my phone? please help, it seem to be a Hardware problem because after cut TP, phone doesn´t power on anymore.

Same thing wiht A57

Thanks for your help

BB-gsm · 02-20-2006, 16:42

Did u use hammer to cut the wires ?

Use search button !

foony · 03-01-2006, 15:11

Quote:

Originally Posted by BB-gsm

Did u use hammer to cut the wires ?

Use search button !

I have here phone with the same sympthone but all 3 repaire tracks

http://forum.gsmhosting.com/vbb/atta...2&d=1138624052

are OK, no damaged. But phone not pw on, can boot, but can not send Skey.

radez · 03-18-2007, 04:32

I have same problem but pls dont blame me for removing the shield with soldering station

so I think problem is close to it

I ve found out that error caused by processor or quartz damage but I rehotted both changed quartz and still no result dialog changed and still same 0,3a when pressing on button and coming down to 0 .Who knows what the problem is I think processor problem but......
Best regards

bond95 · 03-18-2007, 04:44

Bad cut testpoint repair ...

MATRIX.REAL · 03-18-2007, 10:49

Quote:

Originally Posted by bond95

Bad cut testpoint repair ...

VERY GOOD JOB man .... JAMES BOND ...

02-19-2006, 20:45	#1 (permalink)
baleso Junior Member Join Date: Nov 2004 Age: 53 Posts: 9 Member: 92883 Status: Offline Thanks Meter: 0	A70 and A57 dead after cut test point Pleaaaase help me my A70 dead after i cut the TP. The dead phone can communicate with Jocker and i can calculate Skey but can´t send Skey. When i push "Send Skey" Jocker ver 0.3.4.3 say: Start... Loading ServiceBoot... Sending ServiceBoot Ok. The phone was switched off on an error: EXIT: D500 08 0000 pleas how can i repair my phone? please help, it seem to be a Hardware problem because after cut TP, phone doesn´t power on anymore. Same thing wiht A57 Thanks for your help

03-18-2007, 04:32	#4 (permalink)
radez No Life Poster Join Date: Nov 2005 Location: UNLOCKING IN GENERAL:) Age: 51 Posts: 822 Member: 196126 Status: Offline Thanks Meter: 80	A70 I have same problem but pls dont blame me for removing the shield with soldering stationso I think problem is close to itI ve found out that error caused by processor or quartz damage but I rehotted both changed quartz and still no result dialog changed and still same 0,3a when pressing on button and coming down to 0 .Who knows what the problem is I think processor problem but...... Best regards

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
m65 dead after bad test point cut	Mr@mr	S-Gold Based Phones	11	06-04-2005 21:43
cx62 vibra and INSERT SIM problem after cut test point?	Ami	S-Gold Based Phones	4	05-19-2005 15:09
A65 dead after bad test point cut!!!	eddierasta	E-Gold Based Phones	8	05-17-2005 18:03
Please Help Me I Have CF62 Always Say Card Error After Cut Test Point	Mony.Never.Die	S-Gold Based Phones	4	11-08-2004 09:44
a52 after cut test point dead	abdoulaye	E-Gold Based Phones	4	05-06-2004 17:08

02-20-2006, 16:42	#2 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 723	Did u use hammer to cut the wires ? Use search button !