CF 110 - White Screen - GSM-Forum

Ferchi · 01-31-2006, 08:37

Hi
I need some help to get back a CF 110.
I have one CF 110 SW 07 (Amena) with white screen.
I made this:
1.- TP ok
2.- 1st Round: Using joker V0341: "calc skey", "send skey", "service mode" and "ReCalc All Keys"
3.- Phone hangs in "welcome screen" or (Amena bienvenido), phone just turn on and off, nothing else.
4.- 2nd Round: "calc skey", "send skey", "service mode" and "read
and calc keys".
5.- 3th round: "service mode", "del instances" and phone K.O. !!!
Before that, phone just shows: white screen.
6.- 4th round: I flashed using WinSwUp C110070101_update! K.O. Phone doesn't turn on..... same white screen.
This is actual Joker info:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 239 (C110)
C110 lg1 Sw07 14.10.05 15:06:55
IMEI: 3575470019xxxxx
DisplayID: 62, Sharp Nec PD161700
FSN: 1B48B6F9
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3947 mV.
SecurityMode: Factory
Get Info...
MobileMode: Service
HWID: 239 (C110)
C110 lg1 Sw07 14.10.05 15:06:55
IMEI: 3575470019xxxxx
DisplayID: 62, Sharp Nec PD161700
FSN: 1B48B6F9
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3902 mV.
SecurityMode: Factory
DSP Firmware Version 00, Power Asic Project ID: 00, RF Chipset ID: 0A
EELITE Info: free buffer 109234 bytes, free at all 109990 bytes, free for deleted 109990 bytes.
EEFULL Info: free buffer 77140 bytes, free at all 224470 bytes, free for deleted 93542 bytes.
Battery Ri measurement: CutOff Idle: 3454mV, CutOff Talk: 3682mV, CutOff Idle: 3405mV, CutOff Talk: 3671mV, CutOff Idle: 3365mV, CutOff Talk: 3604mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV.
Operating time: Total 97405 sec, Current SW 97405 sec.
Talk time: Total 2181 sec, Current SW 2181 sec.
CSD: Total 0 bytes, Current SW 0 bytes.
GPRS: Total 0 bytes, Current SW 0 bytes.
I don't have any backup, just the joker's backup.
Any suggestions?
How can I fix this?
Anyone have this? ---> FF (FF,BC,EEP,LG,T9,)
Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C?
For Joker
PD. Sorry about my english

and I hate white screens in Siemens.

Chris02 · 01-31-2006, 20:59

Try to set contrast using joker

Ferchi · 02-01-2006, 12:30

Contrast is fine.... 178,0

Phone is in white screen, since I press "Del Instances"

Anyone has full flash (joker) for CF 110 sw 07?
Full Flash (FF,BC,EEP,LG,T9,)
Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C?

Ferchi · 02-05-2006, 18:13

I' ve flashed Full flash from another CF 100 same version.

Now phone starts, but it hang on startup screen.

I have full backup from another CF 110...

What should I do?

Chris02 · 02-07-2006, 09:10

Maybe the problem is a ba d cut.

Check the tracks around the tstpoint

5rrrrr · 07-09-2007, 00:53

any one flashfile and flasher for this i have also one dead

kanwal · 07-09-2007, 05:00

dream box is best for seimense phones if u use jocker it is limited for for functions

01-31-2006, 08:37	#1 (permalink)
Ferchi Junior Member Join Date: Jun 2003 Posts: 20 Member: 32600 Status: Offline Thanks Meter: 0	CF 110 - White Screen Hi I need some help to get back a CF 110. I have one CF 110 SW 07 (Amena) with white screen. I made this: 1.- TP ok 2.- 1st Round: Using joker V0341: "calc skey", "send skey", "service mode" and "ReCalc All Keys" 3.- Phone hangs in "welcome screen" or (Amena bienvenido), phone just turn on and off, nothing else. 4.- 2nd Round: "calc skey", "send skey", "service mode" and "read and calc keys". 5.- 3th round: "service mode", "del instances" and phone K.O. !!! Before that, phone just shows: white screen. 6.- 4th round: I flashed using WinSwUp C110070101_update! K.O. Phone doesn't turn on..... same white screen. This is actual Joker info: Start... Loading ServiceBoot... Sending ServiceBoot Ok. BFB Speed 115200 Baud - Ok. MobileMode: Service HWID: 239 (C110) C110 lg1 Sw07 14.10.05 15:06:55 IMEI: 3575470019xxxxx DisplayID: 62, Sharp Nec PD161700 FSN: 1B48B6F9 SW FlashID: 0001/2221 Code(05): OTP closed Code(09): BootKEY is written in EEPROM Code(0D): Keys are registered in BCORE Code(13): Complete access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage 3947 mV. SecurityMode: Factory Get Info... MobileMode: Service HWID: 239 (C110) C110 lg1 Sw07 14.10.05 15:06:55 IMEI: 3575470019xxxxx DisplayID: 62, Sharp Nec PD161700 FSN: 1B48B6F9 SW FlashID: 0001/2221 Code(05): OTP closed Code(09): BootKEY is written in EEPROM Code(0D): Keys are registered in BCORE Code(13): Complete access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage 3902 mV. SecurityMode: Factory DSP Firmware Version 00, Power Asic Project ID: 00, RF Chipset ID: 0A EELITE Info: free buffer 109234 bytes, free at all 109990 bytes, free for deleted 109990 bytes. EEFULL Info: free buffer 77140 bytes, free at all 224470 bytes, free for deleted 93542 bytes. Battery Ri measurement: CutOff Idle: 3454mV, CutOff Talk: 3682mV, CutOff Idle: 3405mV, CutOff Talk: 3671mV, CutOff Idle: 3365mV, CutOff Talk: 3604mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV. Operating time: Total 97405 sec, Current SW 97405 sec. Talk time: Total 2181 sec, Current SW 2181 sec. CSD: Total 0 bytes, Current SW 0 bytes. GPRS: Total 0 bytes, Current SW 0 bytes. I don't have any backup, just the joker's backup. Any suggestions? How can I fix this? Anyone have this? ---> FF (FF,BC,EEP,LG,T9,) Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C? For Joker PD. Sorry about my english and I hate white screens in Siemens.

02-01-2006, 12:30	#3 (permalink)
Ferchi Junior Member Join Date: Jun 2003 Posts: 20 Member: 32600 Status: Offline Thanks Meter: 0	Tested contrast Contrast is fine.... 178,0 Phone is in white screen, since I press "Del Instances" Anyone has full flash (joker) for CF 110 sw 07? Full Flash (FF,BC,EEP,LG,T9,) Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
siemens cf 110	aurelmarius1	E-Gold Based Phones	28	01-27-2025 22:19
5130 white screen when play video	fakhraei2000	Nokia Hardware & Hardware Repair	13	11-15-2010 04:54
kg 110 white screen with black spots	ezysuresh	ET-BoX	5	10-01-2007 07:34
CF 110 unlock !!!ok	alunecosu_hd	SST-Dongle	26	11-04-2006 14:12
CF 110 bad cut repair...	Alinush75	E-Gold Based Phones	1	03-11-2006 07:38

01-31-2006, 20:59	#2 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 38 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	Try to set contrast using joker

02-05-2006, 18:13	#4 (permalink)
Ferchi Junior Member Join Date: Jun 2003 Posts: 20 Member: 32600 Status: Offline Thanks Meter: 0	I' ve flashed Full flash from another CF 100 same version. Now phone starts, but it hang on startup screen. I have full backup from another CF 110... What should I do?

02-07-2006, 09:10	#5 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 38 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	Maybe the problem is a ba d cut. Check the tracks around the tstpoint

07-09-2007, 00:53	#6 (permalink)
5rrrrr Insane Poster Join Date: May 2006 Location: "TnT" Tago Ng Tago Posts: 88 Member: 272482 Status: Offline Thanks Meter: 65	any one flashfile and flasher for this i have also one dead

07-09-2007, 05:00	#7 (permalink)
kanwal Freak Poster Join Date: Apr 2007 Location: tashkant Age: 44 Posts: 415 Member: 496736 Status: Offline Thanks Meter: 17	dream box is best for seimense phones if u use jocker it is limited for for functions