Real A55 Test point to use with Ksie2!! Tested!!! - GSM-Forum

gsm flying free · 07-08-2003, 21:23

Test point to use with Ksie2!!

Tested 100%!!!!

You can see it in www.unlockeasy.net

Also how to unlock using Ksie2.

aba1999 · 07-08-2003, 21:32

That's for a long time (aprox.10 days ) info from www.spunlock.biz . If you download A55 direct unlocker , you have same pic in file with them .
...but that variant for me worked 100% on A55 v.05 and A55 v.08
Also , i use SPUNLOCK direct unlocker for unlock them . Ksie is probably safe solution but i'm not try them .
We all need to share info .

WBR ,
Benjamin

jeremias33 · 07-08-2003, 23:20

I I guess this is a fake
there is no wire beyond the green on board at this specific place
:-)

gsm flying free · 07-09-2003, 09:33

Is not a fake.

This solution is tested and works fine.

regmwesiga · 07-09-2003, 12:47

Dear Benjamin

Can you tell us if you find any wire as per diagram, I scratched this area but when I connected it doesn't respond. Is this Versions you mentioned has this wire? Why the Test Point is different from one to another? For Martech Software Test Point with 5v can I use 4.5v for Spunlock Software?

It seement this way of cutting is diffult, there is no anydody to find the simple test point

BLIDA · 07-09-2003, 14:36

very simple test point on a55 i do it normally just cut little bit like on diagram work 100% tested and approved .
nb: this test point don't work with martech .

osvaldas · 07-09-2003, 19:39

This picture is not new, it allready existed long time ago, when most people didn't know anything about A55 unlocking. I think it's better then Maxfron's, easier to access the track and works 100%.
p.s. forget about Martech's test points

Leslie_B. · 07-09-2003, 21:16

This is ~2 month old solution...(for me)
Thx to Mark!

alruus · 07-10-2003, 17:57

What is thist:

"I think it's better then Maxfron's, easier to access the track and works 100%"

Where?

BR
ALRU

Greekoff · 07-10-2003, 19:53

Hi to all.
Strange, i have two pictures of testpoint. One of them pdf file from Max, another gif from spunlock. I cut line like the pdf file from Max and i get nothing(ksie2 say no bootloader, sftware from spunlock say error). And what i think about it, in pdf file pictures of old c55 phones, becouse they have resistor. A55 havn`t same like new C55. On picture from spunlock phone haven`t resistor, but (may im stupid) i didn`t see any line or something like this to cuting. So can anybody help me to see there is the f*****g point. I send the pictures.

10X

drnele · 07-10-2003, 21:06

You need to scratch at this place until you see metal [gif from spunlock]
B.R.

diGO · 07-11-2003, 10:01

I've tested Spunlock testpoint(A55 v5) & looks working: Ksie 2 reading flash (select C55) & direct unlocking; martech 3.0 cracked, reading eeprom & firmware.
Regards

magnet · 07-11-2003, 10:10

i need help regarding this.
what to do with this test point.
tell me the schematics for a55cable.
i dont have c55 cable.
i have only c25.
can i use this schematics for c55.
please help me regarding a55 unlock.

viho · 07-12-2003, 09:51

working 10000...%
test by me
no 5v

kingofcellulars · 08-23-2003, 10:41

Can i just leave the testpoint cutted or join it back spunlock test point

07-08-2003, 21:23	#1 (permalink)
gsm flying free Freak Poster Join Date: Apr 2001 Location: madrid Age: 44 Posts: 318 Member: 4411 Status: Offline Thanks Meter: 1	Real A55 Test point to use with Ksie2!! Tested!!! Test point to use with Ksie2!! Tested 100%!!!! You can see it in www.unlockeasy.net Also how to unlock using Ksie2.

07-10-2003, 19:53	#10 (permalink)
Greekoff Insane Poster Join Date: Feb 2002 Posts: 68 Member: 9227 Status: Offline Thanks Meter: 0	A 55 testpoint Hi to all. Strange, i have two pictures of testpoint. One of them pdf file from Max, another gif from spunlock. I cut line like the pdf file from Max and i get nothing(ksie2 say no bootloader, sftware from spunlock say error). And what i think about it, in pdf file pictures of old c55 phones, becouse they have resistor. A55 havn`t same like new C55. On picture from spunlock phone haven`t resistor, but (may im stupid) i didn`t see any line or something like this to cuting. So can anybody help me to see there is the f*****g point. I send the pictures. 10X

07-12-2003, 09:51	#14 (permalink)
viho Freak Poster Join Date: Feb 2003 Location: BG Montana Age: 52 Posts: 266 Member: 20654 Status: Offline Thanks Meter: 26	working working 10000...% test by me no 5v

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
how to use test point to k750	talatmehmood	Cruiser Suite	0	12-04-2008 12:25
v360v unlock by test point or not unlock by test point?	The Repair Shop	Smart-Clip	3	05-07-2006 21:02
How to Connect K750i Test Point & Where Is The Test Point Location	MT_LBN	Sony Ericsson	0	02-03-2006 01:24
is V600 CID49 test point the same as K608 test point !!!	the new	SonyEricsson (USB-Smart)	0	12-26-2005 12:03
do i need to make a test point on a65 with sst 5.31	crisrad	E-Gold Based Phones	3	12-23-2004 22:05

07-08-2003, 21:32	#2 (permalink)
aba1999 Freak Poster Join Date: Sep 2002 Location: Travnik , BiH Age: 55 Posts: 118 Member: 15615 Status: Offline Thanks Meter: 0	That's for a long time (aprox.10 days ) info from www.spunlock.biz . If you download A55 direct unlocker , you have same pic in file with them . ...but that variant for me worked 100% on A55 v.05 and A55 v.08 Also , i use SPUNLOCK direct unlocker for unlock them . Ksie is probably safe solution but i'm not try them . We all need to share info . WBR , Benjamin

07-08-2003, 23:20	#3 (permalink)
jeremias33 Junior Member Join Date: Jul 2003 Posts: 9 Member: 33637 Status: Offline Thanks Meter: 0	I I guess this is a fake there is no wire beyond the green on board at this specific place :-)

07-09-2003, 09:33	#4 (permalink)
gsm flying free Freak Poster Join Date: Apr 2001 Location: madrid Age: 44 Posts: 318 Member: 4411 Status: Offline Thanks Meter: 1	Is not a fake. This solution is tested and works fine.

07-09-2003, 12:47	#5 (permalink)
regmwesiga Insane Poster Join Date: Jan 2003 Location: tanzania, East Africa Age: 52 Posts: 95 Member: 20594 Status: Offline Thanks Meter: 0	Dear Benjamin Can you tell us if you find any wire as per diagram, I scratched this area but when I connected it doesn't respond. Is this Versions you mentioned has this wire? Why the Test Point is different from one to another? For Martech Software Test Point with 5v can I use 4.5v for Spunlock Software? It seement this way of cutting is diffult, there is no anydody to find the simple test point

07-09-2003, 14:36	#6 (permalink)
BLIDA No Life Poster Join Date: Sep 2002 Location: ALGERIA Posts: 1,716 Member: 15439 Status: Offline Sonork: 100.43816 Thanks Meter: 52	very simple test point on a55 i do it normally just cut little bit like on diagram work 100% tested and approved . nb: this test point don't work with martech .

07-09-2003, 19:39	#7 (permalink)
osvaldas Freak Poster Join Date: Jan 2002 Location: Lithuania Posts: 138 Member: 9058 Status: Offline Thanks Meter: 0	This picture is not new, it allready existed long time ago, when most people didn't know anything about A55 unlocking. I think it's better then Maxfron's, easier to access the track and works 100%. p.s. forget about Martech's test points

07-09-2003, 21:16	#8 (permalink)
Leslie_B. No Life Poster Join Date: Oct 2002 Location: Montenegro Age: 37 Posts: 670 Member: 17230 Status: Offline Thanks Meter: 6	This is ~2 month old solution...(for me) Thx to Mark!

07-10-2003, 17:57	#9 (permalink)
alruus Freak Poster Join Date: Nov 2001 Location: spain Posts: 209 Member: 7506 Status: Offline Thanks Meter: 0	What is thist: "I think it's better then Maxfron's, easier to access the track and works 100%" Where? BR ALRU

07-10-2003, 21:06	#11 (permalink)
drnele No Life Poster Join Date: Jan 2003 Location: Bosnia and Herzegovina Posts: 794 Member: 19493 Status: Offline Sonork: 100.1596420 Thanks Meter: 186	You need to scratch at this place until you see metal [gif from spunlock] B.R.

07-11-2003, 10:01	#12 (permalink)
diGO Freak Poster Join Date: Jul 2002 Location: Spain Posts: 143 Member: 13745 Status: Offline Thanks Meter: 0	I've tested Spunlock testpoint(A55 v5) & looks working: Ksie 2 reading flash (select C55) & direct unlocking; martech 3.0 cracked, reading eeprom & firmware. Regards

07-11-2003, 10:10	#13 (permalink)
magnet No Life Poster Join Date: Nov 2002 Location: cellworld Age: 47 Posts: 731 Member: 17907 Status: Offline Thanks Meter: 42	i need help regarding this. what to do with this test point. tell me the schematics for a55cable. i dont have c55 cable. i have only c25. can i use this schematics for c55. please help me regarding a55 unlock.

08-23-2003, 10:41	#15 (permalink)
kingofcellulars Insane Poster Join Date: May 2003 Location: Australia/Sydney Age: 44 Posts: 78 Member: 28653 Status: Offline Thanks Meter: 5	Can i just leave the testpoint cutted or join it back spunlock test point