Repair ALL SX1 here Hey everybody ! Here`s my next guide about Siemens reviving, now about this crazzzyyy SX1 !!! REPAIR ALL software Bugs of SX1, not going in SWUP mode, blinking, not turning on, dead .. etc Tools needed: Software: V-Klay v3.3, Joker v3.4.3, SYMBIAN FULL Flash file 32Mb (with loader for V-Klay), E-Gold FullFlash 8Mb Hardware: ANY S-Gold based x65/75 phone (with 32Mb flash chip) There are 2 types of SX1: http://evil-hackers.com/BB-gsm/images/SX1.JPG One has BIG FlashIC, second has SMALL as ANY S-Gold x65 phones with 32Mb ! For example, let`s say, we have SX1 with BIG Flash IC and a working C65 phone; So what you have to do is to put a SMALL FlashIC in this C65, as SX1 has BIG one it will not fit in C65 board, so you`ll need a SMALL flashIC from any x65 S-Gold phone (C65, CX65, ..etc) http://www.evil-hackers.com/BB-gsm/images/x65.jpg So now we have to Write a SX1 Symbian FLASH part in it :D Copy provided loader x65pv.vkd into V-Klay`s loader folder(V_KLay\data\Loaders), And open up V-Klay ! Choose options like this: http://evil-hackers.com/BB-gsm/images/v-klay_model.JPG Thus, open Symbian FullFlash and press write memory (new window will come up asking if you really want to write fullflash, just press YES) So, Connect TestPoint with GROUND and power on the phone shortly, http://evil-hackers.com/BB-gsm/images/v-klay_boot.JPG boot.bin will go, and you`ll hear a BEEP sound, soft saying Pause.bin, now you have to DISCONNECT TestPoint from ground, Software will boot and start prepairing to READ BACKUP, so just cancel it, then it will START WRITING Fullflash ... In about a half an hour (depends what speed you are writting full with), it will say Flashing Completed Successfully !!! Now take out the FLASH IC from C65 and put it in SX1 OMAP board, (reball it and resolder as well :D) See the balls which you will IGNORE http://evil-hackers.com/BB-gsm/image...with_SMALL.jpg After you have Resoldered it well, replace these 2 resistors and short the rest two ;) You can see well in this picture: http://evil-hackers.com/BB-gsm/image...IG_toSMALL.jpg Symbian Flash is DONE ! What about E-Gold part ?! Now open up Joker, and Fullflash the phone with 8Mb fullflash, make recalc all keys after flashing as usual ! AND POWER UP SX1 !!!! Damn this crazzzyyyy SX1 is working now !!! web-site access: User: GEORGIA Pass: Tbilisi Password of protected files is: Tbilisi Very BIG thanks to my friend DJON (vladvil) for helping :) Regards, BB-gsm |
Yes 100% work,i use this metod in 2005year :-) but solution give me my friend... i canot write to any forum :) ... but now 100% oficial! BR |
very hard solution, software and hardware combinations.. not for newbie. |
i have 2 sx1 not going in test mode ? help pls |
Nice I Will Try.................. |
Ok...good solution but... ...I have here one SX1 wich come to me one month before, I do WinSwup and phone working OK untill now. Now only SiemensMobile at the startup...I can flash hem with any tool, WinSwup goes just fine but result is the same...only SiemensMobile....?????? |
@ hallo Press and hold buttons: Code: * + # + Power On Battery must be well charged of course ! Regards, B |
Thank's for... Quote:
|
@ hallo Have you tried to plug in charger to the powered off phone ? |
Yes.... Quote:
|
If it can go to Flash mode, and it can be flashed (with swup v15, via USB) with all options ticked but result is same, it means it is hardware problem, try rehoting RAM IC and then CPU ! Regards, B |
holy smoke!! finally a solution for sx1!!!!! thnks so much!!!! |
thanx to nice solution keep up.... |
nice soliution but i don't have any S-Gold phone in hand & i think that my problem is the symbian part so is there any other sugestions ? i need wuick help please BR, Kiriazy |
thx sır test me ok thx |
All times are GMT +1. The time now is 12:57. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -